Dry pasting method

1. Pasting method of small car stickers with transparent transfer film

Tools: rag, scraper or credit card

< p>　1. Clean the car body and keep it dry.

2. Determine the location to be posted. Under normal circumstances, slowly apply it while scraping it with a tool, and peel off the backing paper at the same time.

3. If the graphic is really not big, you can also tear off all the transparent transfer film and stickers and then stick them on. But care must be taken to avoid accidental adhesions.

4. After pasting it, scrape and press it several times. Peel off the transparent transfer film.

5. Use a utility knife to make a cut on the car door and seam, and wrap it inwards.

6. Do not allow any separation or protrusion between the car sticker and the body.

Wet pasting method

2. Pasting method of large car stickers with transparent transfer film

Tools: rag, sprinkler, scraper or credit card

p>

1. Clean the car body and evenly sprinkle water on the parts of the car body to be pasted - to reduce the viscosity of the sticker and make it easier to adjust the position.

2. Determine the location to be posted. Slowly apply it, gently scrape it with a tool, and peel off the backing paper.

3. When encountering door handles or anti-scratch strips, cut the material and wrap it up according to the situation.

4. Make appropriate adjustments, and after confirming the general position of the graphics, scrape off the water and bubbles repeatedly with force. Peel off the transparent transfer film.

5. Use a utility knife to make a cut on the car door and seam, and wrap it inwards.

6. Do not allow any separation or protrusion between the car sticker and the body.

7. Try to dry out the moisture in the car sticker. If possible, you can heat and dry it appropriately. Depending on weather conditions, wait a day or two before washing the car.