After pulling out the etc card, the side with the chip on the front should be gently inserted into the card slot of the ETC sensor. After the sensor senses the ETC Express Card, the sensor display will light up and the words "Start bookkeeping" will appear, indicating that the sensor and the Express Card are well connected.
ETC sensor is generally installed on the front windshield of the car, and its base is fixed by a small round plastic sucker on the front windshield. In the second step, the wiring harness plug of the sensor needs to be inserted into the connecting port of the sensor, and the wiring harnesses are connected together through the network in the car. This wiring harness flows out from the intelligent information system in the car, and the wiring harness is wound out from the large ceiling trim in the car.
If you apply for ETC from a bank, it is the debit card or credit card of the bank you apply for. This card is a courier card with a chip. The express card is bound to the bank card. Of course, you can also recharge this ETC Express card. Please consult your local ETC office for details. Take out the Express card, and then gently insert the side with the chip on the front into the card slot of the ETC card sensor. If the card is inserted correctly, after the sensor senses the ETC express card, the sensor display screen will light up and the words "Start accounting" will appear, indicating that the sensor and the express card are well connected.
When driving in and out of the expressway, the ETC sensor will sense with the electronic information network of the expressway toll station and automatically swipe the card. Therefore, manual payment does not require parking, which saves the time of queuing and is very convenient.
1. The Industrial Credit Card will not expire within a few days.
It is unde