Responsibility letter for safe driving

In today's society, the responsibility letter plays an increasingly important role. The responsibility letter is a document stating the responsibilities and targeting at different departments. Do you know the format of the responsibility book? The following is the letter of responsibility for safe driving that I have compiled for everyone's reference, hoping to help friends in need.

letter of responsibility for safe driving 1

in order to ensure civilized and safe driving, we have signed this letter of responsibility for safety with the college and promised to implement it according to the contents of this letter of responsibility.

1. I consciously abide by the Road Traffic Safety Law of the People's Republic of China and other relevant laws and regulations, abide by all the rules and regulations of the college, strictly implement the Interim Measures for Vehicle Management of Zilang Vocational and Technical College, keep a strong sense of safety at all times, and pay attention to safety at all times.

2. Insist on regularly attending the study of safety knowledge, relevant documents, rules and simple troubleshooting methods for vehicles. If you don't take part in the study for no reason, you should make up the study. If you don't make up the study, you can stop driving.

iii. I shall conduct self-inspection on the safety and technical conditions of the vehicle I am driving, especially on the braking, steering, transmission system and light signal device, and do a good job in daily maintenance and regular maintenance of the vehicle, as well as insurance and annual inspection of the vehicle. Losses caused by repair, maintenance, insurance and untimely annual inspection shall be borne by the driver himself.

fourth, the work is warm and thoughtful, and the language is civilized. Before leaving the car, confirm the driving destination and choose the best driving route.

5. Keep communication tools open for 24 hours.

6. Love your job and obey the scheduling. Have a strong sense of collective and teamwork.

7. If there is a traffic accident, never escape, report it to the local traffic police quickly, protect the scene, rescue the wounded and actively cooperate with it. And report to the director of the president's office at the first time.

VIII. Whoever is responsible for a traffic accident will be dealt with by the traffic management department, and the college will deal with the driver according to the regulations.

Driver:

College:

2

1. Obey the rules and discipline and standardize driving

1. Drivers must abide by the Regulations of the People's Republic of China on Road Traffic Management, relevant traffic safety management laws and regulations, and the company's rules and regulations on vehicle management and employee code.

2. Drivers must strictly abide by relevant driving operation regulations, drive carefully, abide by professional ethics, strictly abide by corporate passwords, and firmly establish the idea of "safety first".

2. Standardized procedures and complete certificates

1. Drivers should strictly implement the system of dispatching cars when driving. It is strictly forbidden to drive cars without permission, to give them to others for driving, and to use buses for private use or to teach others how to drive.

2. The driver should record the driving route and mileage of the vehicle according to the driving situation of the vehicle.

3. If the vehicle breaks down or has reached the mileage of maintenance kilometers, it should be guaranteed and maintained in time.

4. The driver should always check the validity of all kinds of certificates of his vehicle, carry them with him, and pay all fees in time. If the certificates are not handled in time, all fines and violations caused by the driver's negligence will be borne by the driver.

3. Safe driving and civilized service

1. Drivers should strictly implement the "eight inspections" measures. Eight inspections: check the steering of the vehicle, check the tires of the vehicle, check the braking of the vehicle, check the lighting of the vehicle, check the suspension of the vehicle, check whether the tank body and the car body are damaged or leaked, and check whether there are fire-fighting appliances.

2. Drivers should drive in strict accordance with the law, drive safely and in a civilized way, and achieve "six checks". Six noes: do not drive a car with incomplete procedures, a car with scrapped hidden dangers, an overloaded and speeding car, a drunk driving car, a tired driving car, a car that is not allowed to drive, and a car that has not passed the safety inspection. Two inspections: check whether the vehicle has hidden troubles before leaving the vehicle, and check whether there are illegal and irregular behaviors while driving.

3. The driver should obey the arrangement, leave the car on time, be warm and civilized to the passengers, no smoking in the car, and the driver should be polite.

4. There are rewards and punishments, and the rewards and punishments are clear.

1. If the external driver fails to abide by the relevant rules and regulations of the unit, the service attitude is complained for three times, or the performance is not qualified for the driver position, the unit will dismiss him.

2. The vehicle has a traffic accident. If the driver takes full responsibility, I will be responsible for all economic losses after deducting the indemnity from the insurance company; Take the main responsibility, I bear 7% economic losses; Bear the same responsibility, I bear 5% economic losses; Take secondary responsibility, I bear 3% economic losses; No responsibility, I am not responsible for economic losses.

3. The fines caused by the driver's personal behavior violation or incomplete documents shall be borne by the individual.

4. Assessment contents:

A. No traffic accidents and violations occurred;

b, the vehicle did not have any accidents such as collision and scraping inside the vehicle in that month, and the vehicle was in good technical condition;

c, the driver was not complained about using the car that month;

d, abide by the provisions.

5. The unit will assess the drivers monthly according to the above management regulations, and give driving subsidies or other standard rewards according to the standards set by each unit. Those with excellent cumulative situation recommend the company to participate in the year-end red flag driver appraisal.

letter of responsibility for safe driving on xx

3

Party A: Jianshi County Environmental Sanitation Management Office (hereinafter referred to as Party A)

Party B (driver): (hereinafter referred to as Party B)

In order to strengthen the vehicle safety management of this unit, adhere to the policy of "safety first, prevention first", clarify responsibilities, ensure normal operation and ensure the property and property of this unit.

1. responsibilities and rights of party a

1. party a shall complete all kinds of certificates for normal driving of vehicles according to regulations and participate in the annual inspection.

2. party a has the obligation to complete the necessary safety facilities when the vehicle is running.

3. Party A shall ensure that the vehicle is in good running condition, and arrange repairs in time in case of failure.

4. Party A should strengthen the education of Party B's traffic safety laws and regulations. If Party B fails to obey the traffic rules and causes a traffic accident, Party A will terminate the labor contract with Party B at any time without bearing any economic compensation.

ii. responsibilities and obligations of party b

1. party b must hold a valid driver's license that meets the driving model, strictly abide by the traffic rules, establish the idea of safety first, and ensure the safety of property and employees of the unit.

2. during driving, party b should be courteous and cautious, and avoid driving illegal cars, angry cars, tired cars and hero cars.

3. Party B must return the car to the designated place according to the time specified by Party A, and the bus is not allowed for private use.

4. Party B shall take good care of the vehicle equipment, do a good job of inspection before departure, pay attention to the daily maintenance of the vehicle, ensure that the vehicle it is driving is in good condition, keep the vehicle clean and tidy, report and handle problems in time, and shall not drive with faults, and be responsible for the safety of the vehicle itself and all facilities in the vehicle.

5. The fines arising from Party B's violation of traffic management laws and regulations (including running a red light, not wearing a seat belt, occupying the road, illegally parking, speeding) shall be borne by Party B, and Party B shall strictly drink and drive. Party B shall be fully responsible for the accidents caused by driving out without official permission and lending the vehicle to others without the approval of the company's leaders.

6. Party B shall drive safely and carefully, and do not drive over the speed limit. In case of a traffic accident, Party B shall notify the unit and relevant departments at the first time and protect the scene, and do not argue with the other party. If Party B fails to notify the unit at the first time to fight with the other party, all consequences will be borne by itself, and the unit will not admit any responsibility and compensate for the losses.

7. party b has the right to refuse the illegal command of anyone from party a and to stop the damage to the vehicle.

III. Punishment

1. If the driver does not have complete documents when he leaves the car and fails to carefully check the vehicle, which causes losses to the company, he will bear the loss and be fined 3-1 yuan at a time depending on the seriousness of the case.

2. If the vehicle is untidy and unclean inside and outside, 3 yuan will be fined once.

3. Those who disobey the arrangement of the office, use the vehicle automatically, or refuse to leave the vehicle for an excuse will be fined 1-3 yuan.

4. If the vehicle is not put into the warehouse at the designated place on time after work, 5 yuan will be fined once.

iv. Others

This responsibility letter is made in duplicate, each of which shall be held by Party A and Party B, and shall take effect from the date of signature.

Party A (signature and seal) and Party B (signature and seal)

Date of signing: xx, xx, xx, xx, Letter of Responsibility for Safe Driving 4

Dear parents:

This management regulation is formulated for the personal safety and family happiness of school cyclists.

1. Requirements for students to ride bicycles

1. Students who ride bicycles must be at least 12 years old.

2. Students who ride bicycles must master the skills of riding bicycles.

3. Students who have left school far away must get permission from their parents and submit a written application to the school before they can go to school by bike.

4. Parents of students who ride bicycles must sign a safety responsibility form with the class teacher.

Second, consciously obey the traffic rules

When riding a bicycle, consciously obey the traffic rules. On the road, you should drive in the non-motor vehicle lane, and drive on the right if there is no lane division. When passing through the intersection, you should strictly observe the signal and don't drive around the signal; Don't ride retrograde; No more than two people are allowed to ride a bicycle in parallel, no one is allowed to ride a bicycle with a big handle, no shoulders are allowed to ride parallel, and no riding a bicycle is allowed to chase and fight or climb other vehicles. Before going out, you should check whether the bell, brake and lock of the vehicle are complete and effective, and ensure that there is no problem before you go on the road. When you turn by bike, you should reach out and don't forcibly turn. In case of bad weather, parents should pick you up.

III. Provisions on Vehicle Placement

When you go to school, you can get off at the school gate, then push your bike into the campus, store your bike in the designated area, and you are not allowed to ride your bike on campus. Bicycles should be placed neatly and locked. After school, push out the campus in order and pass the intersection safely before cycling.

4. It is forbidden to damage other people's bicycles. In the designated area, if someone accidentally knocks over another person's bicycle, they should be lifted up and put away in time. If someone intentionally damages another person's bicycle, the whole school will pay compensation according to the price.

Attachment: Letter of Safety Responsibility for Riding a Bicycle to and from School

The student has reached the age of 2, and the parents agree that the student should ride a bicycle to and from school due to his own application. Students and parents have carefully read the school's "regulations on cycling for primary school students after school" and decided to strictly abide by this regulation. If the accidental injury caused by violation of this regulation is borne by the students and parents, a liability certificate is hereby signed.

applicant:

parent: class teacher:

ning xx's responsibility letter for safe driving 5

in order to achieve the annual safety production goal of our factory, ensure the personal safety of all employees in power production activities, ensure the safe operation of power generation and power supply equipment in the whole factory, further improve the management level of safety production, and complete various power generation and power supply production tasks on time, The responsibility book for production safety objectives is signed as follows:

1. Safety responsibility

1. The operation workshop must adhere to the principle of "safety first, prevention first" and conscientiously implement the national guidelines, policies, laws and regulations on production safety and relevant regulations of higher authorities; And according to the factory's annual safety target plan, organize the formulation of specific measures to realize the annual safety target plan in this workshop, and implement it layer by layer according to the safety targets of controlling minor injuries and obstacles in the workshop, abnormal and attempted team control, so as to ensure the realization of workshop-level safety targets.

2. fully implement the safety responsibility system of leaders at all levels, departments, posts and personnel with administrative chief as the first person responsible for safety within the scope of the operation workshop, implement the safety responsibility to each team and everyone, and ensure that safety ideas, safety measures and safety responsible persons are in place in production activities.

3. Strengthen equipment management to ensure the healthy operation of equipment. Do a good job in regular inspection and maintenance of equipment, find and eliminate hidden dangers of equipment in time, and nip all kinds of abnormal situations and accident signs in the bud.

4. Pay special attention to safety education and on-the-job training, and consolidate and improve the safety awareness and professional level of all personnel. Seriously organize the study of safety work regulations, regular examinations and safety education for new factory workers, and implement the annual training plan; Coordinate the safety cooperation and cooperation among the subordinate teams and positions; Responsible for the safety management of temporary workers used to ensure the smooth progress of safety production.

5. in accordance with the regulations of the investigation regulation of production accidents in electric power industry, strictly do a good job in the investigation and analysis of accidents or other unsafe events, so as to achieve "three-no pass".

2. Safety objective

1. No serious personal injury or death accident will occur in power production;

2, no minor injuries and obstacles, attempted control and abnormality;

3. No major equipment accidents due to human responsibility will occur;

4, no major fire accident;

5. There will be no serious road traffic injuries or deaths with equal or above responsibilities.

III. Guarantee measures

1. We should do a good job in safety work all the time, pay special attention to the safety responsibilities of the shift (value) leader, and promote the implementation of the safety responsibility system for personnel at all levels. Carry out strict examination in accordance with relevant regulations, so as to cash rewards and punishments. Regularly report the safety responsibility system to the relevant departments of the factory and accept supervision and inspection.

2. Strengthen the safety ideology education, laws and regulations education and safety technology training for all staff, adhere to the monthly safety analysis meeting and weekly safety day activities, and regularly carry out anti-accident drills to improve the safety awareness and self-protection ability of employees.

3. Do a good job in the implementation of various rules and regulations, especially "safety regulations" and "two votes and three systems". Adhere to the operation and operation according to the rules to ensure safety. Strictly use the operation ticket when operating the equipment, and it is forbidden to operate without a ticket. Fully grasp the situation of safety in production and the ideological trends of employees, promptly correct the bad tendencies that affect safety in production, and seriously investigate and deal with violations of rules and regulations.

4. Strengthen the safety management of the team and carry out effective safety activities in combination with the actual production. Workshop leaders should participate in, inspect and guide the safety activities of the team according to the requirements of the safety production responsibility system, and constantly consolidate the foundation of safety production.

5. We should conscientiously adhere to the safety supervision and check system, promptly report the safety problems at the production site to the factory department, and constantly improve the working environment to ensure personal safety.

IV. Supplementary Provisions

1. This safety objective responsibility book is made in duplicate, one for the factory department and one for the operation workshop.

2. This Safety Target Responsibility Letter shall be implemented as of the date of signing.

operation workshop: xxx workshop director: xxx

factory department: xxx factory director: xxx

xx, xx, xx, xx, xx, 6

Safety work.