Move the mouse to the border of the K-line diagram, and right-click "Line Drawing Tool" in the menu, and the first button from the left of the third line will pop up in the dialog box. Then move the mouse to a certain point of the K-line, click it, and then let go of the drag section and relax your fingers, and the range from 0 to 1 will be determined bit by bit.

It is suggested to combine the percentage line and the band line.

The use of the golden section:

First, the golden section method can characterize the strength of individual stocks.

(1) Stock nature judgment of strong rising stocks: suppose a strong stock rose from 10 yuan to 15 yuan in the last round, showing a strong position, and then there was a pullback. What price will it be adjusted back to? The 0.382 bit of the golden section is 13.09 yuan, the 0.5 bit is 12.50 yuan, and the 0.61.91yuan, which are the three support positions of the stock. If the stock price is supported around 13.09 yuan, the stock will remain strong, and the probability of breaking the new high of 15 yuan in the market outlook is greater than 70%. If it hits a new high, the stock will run in the third main rising wave.

(2) Study on the stock nature of weak stocks: suppose a weak stock fell from 40 yuan to 20 yuan in the last round, and then rebounded, and the golden section was 0.382 yuan; 0.5 is 30 yuan; 0.6 18 bit is 32.36 yuan. If the stock only rebounds to around 0.382 yuan, that is, it encounters resistance, then the weak characteristics of the stock will not change, and the probability of breaking through the low innovation in 20 yuan in the market outlook is greater than 70%; If 30 yuan rebounds to 0.5, the weak stocks of this stock have shown signs of strengthening, and the probability of breaking 20 yuan in the market outlook is less than 50%. The golden section method is effective for stocks with obvious upward or downward trend, but not for stocks running on the platform. Please make a distinction when using.

Second, the application of golden section method in intraday time-sharing trend

Characteristics of the rising trend of individual stocks on the same day: the trading volume is enlarged, and the moving average generally runs slowly above the previous closing price, with a ratio of 2-3. Shortly after the opening every morning, many stocks have rushed to 6-8%, but don't chase them at this price. Based on the high and low prices of stocks at 9: 30 am-11:00 am, draw a dividing line with the golden section (if you start the high jump, the low price should be based on yesterday's closing) to see whether the daily average price line is above or near 0.6 18 and whether it continues to rise slightly. If so, the stock has a high probability of breaking through in the afternoon, which should be 0.665 at this time. If the daily average price line is only hovering at 0.5 or even close to 0.382, it is unlikely that the stock will close the Dayang line. The trend characteristics of falling stocks on the day: the moving average generally runs below the previous closing price and slowly goes down. At10: 30-11:00 in the morning, observe the stocks that have fallen by more than 3%, and draw an observation gold line according to the high and low prices that appear in the morning (the stocks that opened with a gap should have a high closing price before). If the EMA runs around 0.382, the stock is likely to close barefoot that day or the next lowest big negative line. If the daily average price line runs in parallel around 0.6 18, it means that the stock has rebounded and strengthened, and short-term intervention can be considered.

Third, use the golden section to judge the support level or pressure level.

In the technical analysis of the market, the golden section line is a commonly used analytical tool. Its main function is to give the support level or pressure level of the stock index or individual stock in advance by using the golden section rate, so as to prepare for the operation in advance near the possible target position. The golden section line uses the golden section ratio principle to analyze the market, and gives the corresponding tangent position accordingly.

When applying the golden section and percentage line, it should be noted that the two most important lines of the golden section are 0.382 and 0.6 18. In the rebound market, the 0.382 position is the weak rebound target position, and the 0.6 18 position is the strong rebound target position. In the callback process, if there is a strong callback, the 0.382 line should have strong support. If it is a weak callback, the 0.6 18 line is a strong support level.

Fourthly, drawing the golden section line.

At present, most stock analysis software has the auxiliary function of drawing lines, and the drawing of the golden section line is relatively simple, and the drawing method is as follows:

1. Find the line drawing function of the analysis software first, and click;

2. Click the golden section option in the line drawing toolbar;

3. If the stock price is in the bottoming stage, click this low point with the left mouse button as the base point, hold down the left mouse button, drag the mouse to align the sideline with the corresponding high point, that is, trace back the peak of this falling band, loosen the left mouse button system, and generate the golden section line that bounces upward to the upper pressure level.

It should also be noted that: 1, the two most important lines in the golden section are 0.382 and 0.6 18. In the rebound, 0.382 is a weak rebound and 0.6 18 is a strong rebound. In callback, 0.382 is a strong callback position and 0.6 18 is a weak callback position.