I. Original mink

Minks belong to mammals, Carnivora and skunks in animal taxonomy. In the wild, there are American mink and European mink. At present, all countries in the world are descendants of minks in the United States and Europe. 99% of the mink clothes we see are artificially raised. The advantage of artificial breeding is that minks are rarely damaged, and the size, thickness, fur distribution and color difference of minks after cooking are average. In addition, the fur of male and female minks is quite different. Male mink fur is large and rich, and it feels heavy to wear, while female mink is softer and lighter to wear and uses more. Among them, the female mink has narrow and thin body, short hair, light capillary, long and shiny surface hair, and the finished product is more expensive. As for male and female minks, they are generally better than female minks, but they need to be selected according to the preferences and design of buyers. There are many kinds of mink colors: 15, among which the most popular ones are: Benmink, Brown Sable, Brown Sable, Silver-gray Sable, Pearl Sable, White Sable and Black cross mink (with a stripe on the back hair). Each mink is different in size, and the international standard is "number". No.30 is over 89CM, No.20 is 83-89CM, No.0 is 77-83CM, 1 is 7 1 is 65-7 1CM is No.2, No.3 is 59-65CM, No.4 is 53-59CM and 47-59. No.0 and above are big minks. The higher the value of cm, the greater the Zhang Yue and the higher the price. Now there are also No.00 skins and No.000 skins, both of which are large skins. Nordic mink skin quality standards are divided into four grades, namely: Crown, Saga, 1 grade, Saga weak belly, 1 grade weak belly, and grade 2 and above (long hair type, bite type and diseased hair type). Among them, Crown is the highest level of mink in northern Europe, with the highest price, sage and 1 are common, and the quality of Saga's weak belly is slightly poor. Some unscrupulous merchants use the mink below Saga's weak belly to achieve the same appearance as the sage level through processing, and make huge profits.

Second, the origin of mink

At present, mink raw materials are mainly supplied by four Nordic countries and North America. The sales of mink produced in these two places account for 56% of the global mink raw materials; Another 44% is produced in other countries, including sable. The only origin of sable is the Commonwealth of Independent States, which is very valuable. Some of them are made in China, but the grade is very low and the quality is not good. Others are produced in cold countries, but the quality is not as good as that of Europe and America.

During the period of 1954, an international market development and expansion organization formed by fur farming in the Nordic countries of Denmark, Finland, Norway and Sweden was called Nordic Saga Furs, which marked high-quality furs of Nordic origin with "Saga", and only the mink or fox with the best fur could be labeled as "Saga Mink" or "Saga Fox".

The quality of mink in America is higher than that in Northern Europe. The most famous mink in the United States is the "legendary mink", and the best crown-class Nordic mink can also compete with the United States.

Third, the purchase process.

Every year, the four Nordic countries, Germany, the United States and other mink producing areas regularly auction furs at specific locations. In the international market, fur sales are different from ordinary goods, but marked with the reserve price, and whoever bids the highest can get it. In the auction, businesses with investment less than100000 yuan have no right to raise their hands to bid. Generally speaking, domestic small companies rely on large companies to pay commissions to obtain minks, or several small enterprises pool funds to obtain bidding qualifications. After the purchase is completed, it will be delivered to China by international freight. The tariff on mink is 20%. As we all know, there are many smuggled minks in China. Smuggled goods do not mean that the quality of raw leather is not good, but that the price is relatively low. If the price difference between the same two mink garments is about 28-25% and the brands are of the same grade, then the low-priced goods are basically smuggled goods. In 2000, China Customs seized a large number of smuggled goods from Tianjin and Shanghai, and there were also a large number of smuggled goods in Liaoning and Guangdong.

Fourth, the processing technology

The processing technology of mink is "piercing knife". When you buy mink, you can find the edges of strips by touching it carefully with your fingers on a large plane. This is the "piercing" technique. "Piercing a knife" means cutting the "mouth" into "llll", that is, cutting a mink into strips the width of the little finger and sewing them. The sewing is very thin, much thinner than the embroidery stitches. It is reasonable to enlarge the skin in this way, but this is not the main purpose; The second is to serve ... >>

Teach you how to tell the difference between mink coats.

How to identify the quality of mink coat? A wave, push on the fur with your hand to see if it loses hair, and it is best not to lose hair. Second, pull out the long hair and see if there is thick short fluff at the leather board, so as to do it well. Third, grasp the fur by hand, whether it feels soft or not, and soft is better. In addition, choose a slightly larger one, so it will be more comfortable and warm to wear. Spacious and bright, elegant environment, welcome, take your time and visit us freely. Do you want to see if the hair feels straight first? Is the surface level and color matching symmetrical? Beautiful dogskin coat. Check carefully whether the fur tip is burnt. Dyed fur coats should be strictly checked for color difference or odor. Beaver fur coat, focusing on the clarity of flowers. Lake sheepskin coat, short hair, strong and obvious flower bend, better. Fat people should buy short-haired knife coats such as raccoon skin, lamb skin, cat skin, yellow wolf skin and rabbit skin. If you are slim, you can buy fur coats such as fox skin and dog skin. How to care for your fur? A precious fur needs proper care to be preserved forever. Here are some common nursing tips for you: 1. Use a wide-shouldered hanger to hang your beloved fur. 2. Don't cover the mink coat with plastic bags. It's best to cover them with silk clothes. 3. If the fur is wet by rain or frost and snow, it should be hung in the shade to dry naturally, and must not be heated, baked or exposed to the sun. 4. Don't decorate or brush your hair with a general comb without authorization. 5. Don't clean the fur by ordinary methods. Contact the fur shop regularly to keep it clean and beautiful. 6. Avoid carrying a leather bag, so as to avoid the friction between the backpack belt and fur and cause damage. 7. It is best to put fur in the cold storage in summer to avoid the harm of high temperature and humidity and insects and ants. VIP room, feeling at home, warm and dignified waiter, polite fur appraisal. The main difference between artificial fur and natural fur is luster and pattern. Artificial fur has a strong plastic luster, but it doesn't feel warm by hand, while natural fur feels warm by hand. From the pattern point of view, the color and pattern of artificial fur are completely consistent, while the color and pattern of natural fur are impossible to be completely consistent.

How to tell a good mink from a bad one?

We need to look at it comprehensively. First, the needles are short and dense (dense is better); second, the hairs are dense and soft (dense and soft is better); third, the softness of the skin (soft is better); fourth, the glossiness of the needles and hairs (bright is better); fifth, the thickness of the skin (thick is better); sixth, the neatness of the needles (neat is better); and seventh, the feel.

What should I pay attention to when buying mink coats? How to distinguish between true and false and good and bad? 30 points

Identification method of mink coat 1

The mink coat is an expensive leather coat. The mink coat has always been a symbol of expensive status. With the improvement of people's living standards and the popularity of the clothing industry, mink coats have also entered the lives of ordinary people. When buying mink coats, you must know something about the identification of mink coats, so as not to buy low-quality counterfeit products in time.

Tools/raw materials

Eyes, hands and mouth

Steps/methods

1

Identification of mink coat

2

look

Whether the hair shaft is straight, whether the hair surface is flush, whether the color is symmetrical and whether the luster is bright. Poor gloss, messy hair, hair shaft is often fragile and easy to break. If pits are found on the rough surface, you can open the plush by hand and check whether there are smooth boards. If it is a beautiful dog skin coat, carefully check whether the hair tip is burnt; For raccoon fur coat, the focus is on its flower point clarity; If it's a lake sheepskin coat, it's better to have short hair and a solid and obvious pattern. You should also gently push your hands along the surface of the wool to see if there is any hair loss. Secondly, pay attention to whether there is leakage at the flat-fell seam.

three

massage

Rub the leather by hand to check whether it is soft. If it makes noise or feels stiff when rubbing, it means that the tanning degree of leather is poor, which has an impact on the fastness and wearing comfort of fur clothes.

four

blow

Blow on the fur with your mouth to see if the fur is loose, elastic and smooth, and whether there is knotted and greasy fur.

five

Smell the fur, preferably without foul smell, and you can also weigh the clothes. Leather of the same size and light clothing are better, depending on the overall workmanship. The lining workmanship is in harmony with the overall clothing. Lift the leather board by hand to see if it falls off. Blow hair with your mouth to see if there is any hair loss.

six

Check the texture to see if mink is well processed. Minks should be complete, full of fur, uniform fur, symmetrical color and bright luster. You can shake your clothes a few times when you go shopping, so you shouldn't lose your hair. Then, put the clothes on the counter and grab the tufts with proper force to see if there is any hair loss. Flat-fell seam should be straight and stretched, and there should be no curling. The clothes are tight and appropriate, and those who have a sitting position must be symmetrical and do not twist.

seven

Rub the leather several times. If it sounds like kraft paper or feels hard, it means that the tanning penetration of leather is poor and the quality of leather board is poor. You can also grab the leather board with wool, shake it with your hands a few times, listen for noise, feel stiff, and check its softness. Soft is better. Smell the fur again, it's best not to smell fishy, and you can also weigh the clothes. Leather of the same size and light clothing are better, depending on the overall workmanship. The lining work is in harmony with the overall clothing. Lift the leather board by hand to see if it falls off. 200 1 an illegal vendor in xxx, Liaoning province actually stuck mink with double-sided tape, and the whole dress was not stitched with thread, which was unbelievable and amazing. In addition, it depends on whether the color is pure. Incorrect colors or different shades indicate poor dyeing.

eight

The whole coat on the surface of wool is shiny, smooth and complete, with wool and fluff; Can't pollute other colors. If the gloss is poor and the hair surface is messy, the hair shaft is often brittle and easy to break. If pits are found on the rough surface, you can open the plush by hand and check whether there are smooth boards. Push gently along the surface of wool with your hand to see if there is any hair loss. Secondly, pay attention to whether there is leakage at the flat-fell seam.

end

Matters needing attention

(1) Don't use ordinary methods to clean fur, but go to the fur shop regularly to keep it clean and beautiful.

(2) Don't let perfume, cosmetics and hair gel products touch fur.

(3) Never buckle anything on the fur.

(4) Avoid carrying leather bags, so as to avoid damage caused by friction between the backpack belt and fur.

(5) In summer, it is best to put fur into the cold storage to avoid the harm of high temperature and humidity and insects and ants.

(6) Try on various styles of fur and choose the one that best suits your lifestyle.

(7) Fur care A precious fur needs proper care to be durable.

Experience is for reference only. If you need to solve specific problems (especially in the fields of law and medicine), I suggest you consult relevant departments in detail.

How to tell whether mink hair is good or bad

Usually, the basic principles of choosing mink clothing are: seeing, touching, blowing and wearing.

Look: Look at the gloss. The brighter mink looks, the better, and the higher the price. (Reminder: In the past, there was a common counterfeiting method in the market: "oiling", that is, waxing was used to add luster to fur. The method of identification is to brush gently with your hand, and some wool needles will stick together briefly. This kind of coat will feel a little greasy after being touched. Wearing this kind of coat, with the volatilization of wax, it becomes dusty and will soon lose its luster.

Touch: Feel the density of needle velvet with your hands. Good mink, the proportion of needle wool should be moderate, the needle should not be too long and the hair should not be too sparse.

Blow: Blow a breath on a large mink, and the needles and hairs will immediately return to their original state after falling in the range of airflow, indicating that the mink is of good quality. At the same time, when the airflow passes, you can also notice the density of short fluff inside, and the density is better.

Wear: When trying on clothes, buyers can feel the style and weight of clothes. For mink clothing of the same length and style, the heavy raw material is usually male mink, and the light raw material is female mink. The commonly used mink has good raw materials and the most expensive price.

How can minks tell good from bad?

Male mink fur is large and rich, and it feels heavy to wear, while female mink is softer and lighter to wear and uses more. Among them, the female mink has narrow and thin body, short hair, light capillary, long and shiny surface hair, and the finished product is more expensive.

How to identify the quality of mink coat

1. Tips for choosing mink coats

Usually, the basic principles of choosing mink clothing are: seeing, touching, blowing and wearing.

1 Look: Look at the gloss. The brighter mink looks, the better, and the higher the price. (Reminder: In the past, there was a common counterfeiting method in the market: "oiling", that is, waxing was used to add luster to fur. The method of identification is to brush gently with your hand, and some wool needles will stick together briefly. This kind of coat will feel a little greasy after being touched. Wearing this kind of coat, with the volatilization of wax, it becomes dusty and will soon lose its luster.

2 Touch: Feel the density of needle velvet by hand. Good mink, the proportion of needle wool should be moderate, the needle should not be too long and the hair should not be too sparse.

Blow: Blow a breath on a large mink, and the needles and hairs will immediately return to their original state when they fall within the range of airflow, indicating that this kind of mink is of good quality. At the same time, when the airflow passes, you can also notice the density of short fluff inside, and the density is better.

4 Wear: When trying on, the buyer can feel the style and weight of the clothes. For mink clothing of the same length and style, the heavy raw material is usually male mink, and the light raw material is female mink. The commonly used mink has good raw materials and the most expensive price.

How to tell whether a man's mink is good or bad?

1. Hope: There are two kinds of mink hairs on a mink coat. The long and thick ones are called needle hairs, and the short and thin ones are called fluff. Bright needles are only slightly longer than fluff.

Then look at whether the hair shaft is straight, whether the hair surface is flush, whether the color is uniform and whether the luster is bright.

Poor gloss, messy hair, needle hair is often brittle and easy to break.

2. Touch: Rub the leather by hand to check whether it is soft. If you make noise or feel stiff when grinding, it means that the tanning permeability of leather is poor.

It has an effect on the fastness and wearing comfort of mink coats. When pits are found on the rough surface, you can open the plush by hand and check whether there is hair.

You should also gently push your hands along the surface of the wool to see if there is any hair loss. Secondly, pay attention to whether there is leakage at the flat-fell seam.

3. Blow: Blow the fur with your mouth to see if the fluff is loose, elastic and flat; Whether there are knots and greasy hairs. It is best not to see the leather board below when blowing.

4. Color: The whole dress should be dyed evenly and shiny.

5. Smell: It is best not to smell.

6. Diandian: Leather of the same size is lighter.

How to identify the quality of mink

Depends on where his raw materials come from.