↓↓↓↓↓ Click to get more "door and window contracts" ↓↓↓↓
★ Door and window engineering contract ★
★ Aluminum alloy doors and windows contract ★
★ Purchase and installation contract of model curtain wall ★
★? Regular house. renovation contract? ★
Model sales contract for doors and windows 1
Party A:
Party B:
Through negotiation, Party A and Party B have reached the following contract on the transfer of Party A's project package to Party B, regarding the rights and obligations of both parties:
1. The address of doors and windows is huanghe road Commercial House of Changjiang Farm.
2. The material for making doors and windows is 888 light gray material, and stainless steel is 304 profile.
Third, the glass is 5mm white and the bathroom is 5mm frosted.
4. Aluminum alloy and stainless steel materials shall be purchased by Party B, and the loan shall be paid in advance by Party B..
5. Party A and Party B shall pay 30% loan first after installing and manufacturing the outer frame, 30% loan after installation, 35% balance after acceptance, and the remaining 5% for future door and window maintenance. After two years, the balance will be paid in one lump sum.
6. During the construction period, Party B shall operate according to Party A's requirements. All accidents in the construction process shall be borne by Party B and have nothing to do with Party A. ..
7. The unit price of doors and windows is: 260 yuan RMB per square window, 480 yuan RMB per square door and 230 yuan per meter of stainless steel (the thickness of stainless steel is 1.2mm).
Eight. Time limit for a project: Party B must complete the installation of public housing window frames with good quality and quantity before the first ten days of June, 5438+February, and Party B shall be liable for breach of contract for the losses caused to Party A..
Nine, any party breaches the contract, the breaching party shall bear the liability for breach of contract.
X during the construction period, party b's food expenses shall be borne by the changing party, which has nothing to do with party a. ..
10. Without the written consent of Party A, Party B shall not subcontract any subcontracted project in this contract.
12. Party B must provide the unit qualification certificate to Party A and the supervision unit.
Thirteen. When Party B subcontracts the contracted project to others privately, Party A has the right to terminate this agreement.
14. When either party proposes to terminate the contract as agreed, it shall send a notice of termination to the other party in written form, and notify the other party 7 days before sending the basic notice, and the notice shall be terminated when it reaches the other party.
15. If the contract cannot be performed due to force majeure, both parties may terminate this agreement.
16. Party A does not pay for Party B's evacuation from the construction site.
17. When Party A terminates the contract according to the law and this contract, the project cost invested by Party B will only be settled according to the direct project cost.
18. This contract is made in sextuplicate (including two originals), with each party holding one original and two copies.
Nineteen. This contract will come into effect upon signing. If either party breaches the contract, the court will mediate.
Party A: Party B:
Year, month, sun, moon, sun.
Model sales contract for doors and windows II
Party A (consumer): Party B (seller):
Address: Address:
Tel: Tel:
Brand: date of signing: date of installation:
1. In order to safeguard the legitimate rights and interests of both parties, Party A entrusts Party B to process and order aluminum-plastic doors and windows brands (lg Haojiaxi, Broken Bridge Aluminum, Conch, Shide, New World and Beixin) according to the provisions of the Consumer Protection Law of People's Republic of China (PRC), the Civil Code and the Product Quality Law of People's Republic of China (PRC).
1, sliding window model color single glass element /m2, hollow element /m2.
2. The model and color of sliding door are single glass element /m2 and hollow element /m2.
3, casement window model color single glass element /m2, hollow element /m2.
4. The model and color of the sliding door are single glass element /m2 and hollow element /m2.
5. The models and colors of fixed windows are single glass element /m2, hollow element /m2 balcony reinforced corner column, special-shaped reinforced column 180 yuan/linear meter, reinforced splicing column 160 yuan/linear meter, cross beam1linear meter, invisible screen window suspension 120 yuan/piece. Hidden salmon 206 yuan /m2, 400 yuan /m2, window less than 2.25m2, casement window less than 2m2, casement window less than 1m2. The above push-pull price includes ordinary accessories, and the warranty period is five years.
Second, the schematic diagram (omitted)
Remarks:
Third, according to the national standards of people's doors and windows in China, it is convenient for you to correctly choose accessories, reduce disputes and safeguard legitimate rights and interests. Choose the following high-end accessories and enjoy the manufacturer's lifetime warranty.
Waterproof treatment, 148 yuan/barrel, four-point horizontal door conveyor 168 yuan/set, 400 yuan/set, 1200 yuan/set, _ _ yuan/set, brand.
Casement window transmitter 120 yuan/set, 260 yuan/set, 430 yuan/set, brand. 360 yuan/set, 600 yuan/set, brand flat hanging hardware. Window pulley 40 yuan/a, 80 yuan/a, brand. 50 yuan/door pulley, 100 yuan/door pulley, 150 yuan/door pulley, brand. Chemical fiber net 60 yuan/piece, 100 Yuan/piece. Imported vacuum glue is 265 yuan/barrel. 60 yuan/one additional hinge, 100 Yuan/one. Brand. China white rubber 20 yuan/barrel. Conveyor with lock is 228 yuan/set, 460 yuan/set.
Sun room name
standard
Square rigid frame
Colored steel plate roof
Yangguangdai
Tempered glass roof
Single-layer insulating glass
Horizontal open door conveyor sleeve, horizontal open upper hanging conveyor sleeve. Casement window transmission window element
Waterproof bucket, China white plastic bucket, imported vacuum plastic bucket, weighted hinge.
Window pulley element, door and window wheel element, chemical fiber yarn element, conveyor sleeve element with lock door.
Four. Payment method:
1, one-time payment, customers can enjoy 9.7% discount from manufacturers.
2. Installment payment: 60% of the advance payment shall be paid when signing this contract, and the balance shall be paid after the goods arrive at the construction site.
Verb (abbreviation of verb) Total amount of square meters (in words) RMB prepayment balance
6. During the after-sales period of door and window installation, you promised to have a dispute with Party B's installer. Please contact our factory in time so that you can get a satisfactory solution in time. After-sales service telephone number:
7. If your customized doors and windows are measured, designed and installed by Party B, Party B's design scheme must meet the requirements of water, electricity and heating decoration of residential property. After the design scheme is confirmed by your signature, Party A and Party B shall not change it. If it is necessary to change, it must be signed by both parties, and the losses caused by the change shall be borne by the changing party.
Eight, standard drywall reserved gap within 2cm, MAO wall reserved gap within 4cm belongs to the correct standard (special wall should be negotiated by both parties), casement window such as casement window or tile width is less than 4cm, casement window or tile width is less than 4cm.
Nine, after the installation, Party A's construction personnel find that the windows and doors are not straight during the laying of window covers, door covers or porcelain, please inform Party B to adjust them in time to avoid future troubles, otherwise Party B will not bear any responsibility.
10. Please contact the manufacturer in time to solve the quality problems of doors and windows during the warranty period, and Party B must repair them within one week. If Party B and the country where the product is installed have "three guarantees" regulations, it shall be implemented according to the country; If there is no "three guarantees" provision, Party B shall uniformly stipulate half a year.
XI。 Party B will remove the window on its behalf, and the property losses caused in the process of removing the window shall be borne by Party B.. However, Party B has the right to take back the old window for free. If Party A refuses to restore Party B for other reasons, Party A shall pay Party B the cost of removing the window, 50 yuan/m2. Party A shall be responsible for the excessive cracking of the wall caused by the unauthorized removal of the old window.
12. If Party A finds that the appearance and variety of the products are not in conformity with the contract, it has the right to reject the products and refuse to pay. Once the payment for the product is settled, the product conforms to the provisions of the contract between the two parties.
13. After the installation is completed, Party A passes the acceptance inspection and pays Party B the installation personnel fees ... If Party A defaults or refuses to pay without reason, Party B has the right to remove all doors and windows, and the losses caused thereby shall be borne by Party A. ..
Fourteen Dispute resolution: 1. Both parties shall settle the dispute through consultation; 2, the organizer to solve; 3, consumer associations to solve; 4. Complain to the relevant administrative department; 5. Submit to arbitration; 6, to the people's court.
15. This contract is made in triplicate and shall come into effect after being signed by both parties. We hope that both parties will abide by the contract and safeguard their legitimate rights and interests.
Model sales contract for doors and windows 3
In order to standardize the sale of building doors and windows, protect the legitimate rights and interests of both parties, clarify the technical and economic responsibilities of both parties in accordance with relevant laws and regulations, and ensure the normal construction of the project, Party A and Party B agree to sign this contract through consultation for mutual compliance.
1, overview of the use of building doors and windows
Project Name: Building Structure:
Project Address: Usage Level:
2, building doors and windows supply requirements
Variety specification
amount
(square meters)
unit price
(Yuan/m2)
aggregate amount
(yuan)
Delivery date and quantity
Color aluminum sliding doors and windows
According to the needs of the project progress, the delivery will be made on time, and the production will be subject to the window size provided by the construction party, and the contract will be completed. Materials shall be provided by Party A.
Total amount of RMB (in words):
2. 1 The unit price in this contract refers to the wages for the manufacture and installation of doors and windows.
3. Settlement and payment methods:
3. 1 Settlement method: the area is subject to the actual size of the hole.
3.2 Payment method and time limit: 95% of the project cost will be paid after the project is completed and accepted, and the remaining 5% will be paid after the warranty period expires (15 months).
4. Technical requirements
4. 1 The products provided by Party B are implemented and conform to the industry standard (standard name code) JG/T30 18- 1994. If there are special requirements for the product, it shall be decided by Party A and Party B through negotiation, and it shall be stated in column 4.2.
4.2 Other requirements: Party B shall manufacture and assemble in strict accordance with the dimensions provided by Party A. If the dimensions provided by Party A are wrong, Party A shall be responsible for the losses. After the window frame is installed, Party A is responsible for coordination and protection.
5. Acceptance criteria, methods and time limit for raising objections
5. 1 acceptance standard, according to the national standard of the product, if there is no national standard, according to the industry standard or enterprise standard that has been filed by the competent department.
5.2 If Party A finds that the products do not meet the specification requirements during the acceptance, Party B shall complete the rectification within three days.
5.3 If serious quality problems are found in the products, Party B must rework and bear all losses.
6. Liability for breach of contract
Party A and Party B shall strictly perform all the terms stipulated in this contract. If one party breaches the contract, the breaching party shall bear the responsibility and pay the other party five times the liquidated damages according to the relevant provisions of the Contract Law and the agreement of both parties.
7. Method of dispute settlement
In case of any dispute during the performance of this contract, Party A and Party B shall settle it through friendly negotiation. If negotiation fails, it can be submitted to relevant departments for mediation or solved through relevant legal procedures.
8. Futures agreement
8. 1 Party A shall provide the production site and do the corresponding acceptance work in time. If there is any problem, it should be solved through consultation in time. All tools and machinery used by Party B shall be brought by Party B, and Party A shall not bear any expenses.
8.2 Other agreements:
A. Party B must ensure safe production and civilized construction and obey the management of Party A's on-site security personnel. Party A shall not bear any responsibility for the safety accidents caused thereby.
B, Time limit for a project: install all door and window frames on, and install most door and window pages before 12: 00 pm on, and complete all door and window projects, with a total time limit of 25 days. In fact, the construction period is calculated from the arrival of materials, that is, doors and windows are manufactured and installed 15 days, and doors and windows are manufactured and installed 15 days. One day's delay will result in a fine of Wu Bai dollars, and so on.
C, glass loss rate per 100 piece of glass shall not be greater than 2 pieces of glass.
9. This contract shall be signed by representatives of both parties. If there are any outstanding matters, Party A and Party B shall settle them through consultation.
This contract is made in duplicate, one for each party.
Party A: Party B:
Company name: Company name:
Date of signing: Date of signing:
Model sales contract for doors and windows 4
Contract number:
Party A:
Entrusted agent:
Contact address:
Contact telephone number:
Bank of deposit:
Account number:
Party B:
Entrusted agent:
Contact address:
Contact telephone number:
Bank of deposit:
Account number:
According to the provisions of the Civil Code and other relevant laws and regulations, the Buyer and the Seller, through consultation, confirm that this contract is concluded in accordance with the following terms for mutual compliance.
List of doors, windows and prices
Product brand product name main materials unit price specifications model quantity remarks
Total RMB (in words):
Second, the quality and technical standards and product packaging
1, quality and technical standards:
The product quality and technical standards are formulated by the product manufacturer (hereinafter referred to as the original manufacturer).
The materials used for product quality must meet the agreed conditions, the configuration of locks and spare parts should meet the requirements of the buyer, and the qualification certificates of relevant departments should be issued to Party A for filing before installation.
The installation quality must meet the requirements of the current national quality acceptance standards.
If the product is unqualified, the seller must unconditionally rework or return it, and the losses such as materials arising therefrom shall be borne by the seller.
The buyer has known the above standards and confirmed that the products adopting the standards can meet the requirements of the buyer.
2, product packaging:
(1) In case of original packaging, the original packaging standard shall be followed;
(2) If there is no original packaging, it shall be packaged according to the seller's packaging standard.
Three. Receiving project
1. The arrival date of the contract equipment is _ _ _ _ _ _ working days after the contract comes into effect.
2. The actual payment amount under this contract is RMB (in words) _ _ _ _ _ _ _ _.
3. Payment method of Party A to Party B: (1) check; () telegraphic transfer; () Bank draft; ()LC； Telegraphic transfer
4. This contract shall come into effect after being signed by both parties. Payment method: _ _ _ _ _ _ _ _ _ _.
5. Before Party A pays all the payment (100%), the ownership of the goods belongs to Party B. ..
6. Deposit:
Four, packaging, transportation, delivery, acceptance and objection.
1. The packaging of the goods is the original packaging of the manufacturer.
2. Party A is responsible for the transportation of goods and insurance during transportation, and the expenses shall be borne by Party A..
3. Party B is responsible for delivering the goods to Party A. Party A and Party B jointly accept the equipment, with the packing list provided in the equipment box as the acceptance standard. If the goods provided by Party B meet the manufacturer's requirements in quantity, quality and packaging, it shall be deemed that Party B has delivered the goods. The risk responsibility after delivery shall be borne by Party A. ..
4. If Party A finds that the received goods do not meet the requirements, it shall lodge a written objection to Party B within _ _ _ _ _ working days after the arrival of the goods, and Party B shall assist Party A to solve the problem according to the specific conditions of the products within a reasonable time after receiving the objection until it is qualified. If Party A neglects to exercise this right, it shall be deemed that the product has passed the acceptance.
Verb (abbreviation of verb) exemption clause
1. Both parties agree that if this contract cannot be performed in whole or in part (or cannot be performed normally) due to irresistible reasons such as flood, fire, earthquake, typhoon, war, customs inspection, import formalities, delay in delivery by the manufacturer, the corresponding liability for breach of contract shall be exempted.
2. The party affected by the above exemption shall notify the other party within _ _ _ _ _.
3. If the performance of the obligations under this contract is delayed for more than _ _ _ _ days due to the above exemption, either party has the right to contact this contract without any consequences, or both parties may agree to take other remedial measures.
Liability for breach of contract of intransitive verbs
1. If Party A fails to pay in time, Party A shall pay _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2. If Party B fails to deliver the goods on time, Party B shall pay Party A a liquidated damages of _ _ _ _ _ _ _ _ _ _ _ _ _.
Seven. Dispute resolution method
Disputes arising under this contract shall be settled by both parties through consultation. If negotiation fails, both parties agree to submit the contract to the court of the place where the contract is signed, and the losing party shall bear legal fees, transportation fees and other related reasonable expenses.
Eight. others
1. Party A and Party B shall keep confidential the commercial and technical secrets of the other party obtained by signing and performing this contract, including the text of this contract, relevant technical documents, relevant data and other relevant information.
2. If one party makes a legally binding expression of intention on the problems in the conclusion and performance of this contract or the problems related to this contract, it shall be made in writing, stamped with its official seal, and delivered to the other party, and the other party shall reply within _ _ _ _ _ working days, otherwise it shall be deemed invalid.
3. This contract and its annexes shall come into effect after being signed and sealed by both parties, and the relevant documents signed by both parties have the same legal effect as this contract. This contract and its annexes have the same effect after being signed and sealed by both parties by fax. This contract is made in duplicate, one for each party, with the same legal effect.
Party A: (Seal)
Entrusted agent:
Party B: (Seal)
Entrusted agent:
Signing place:
Signature time:
Model sales contract for doors and windows 5
Party A:
Party B:
Through negotiation between Party A and Party B, Party A contracted the plastic-steel door and window project to Party B for construction. In order to ensure high-quality and rapid completion of this work, Party A and Party B sign this contract and abide by it jointly.
Article 1: Project Overview
1, name:
2. Address:
3. Contents of the contract:
Article 2: Material Requirements
1, this project adopts () brand plastic-steel profiles.
2. Glass is made of ordinary insulating glass. The installed glass shall be smooth and firm, and shall not be loose. Internal and external surfaces should be clean, and there should be no dust and water vapor in the glass interlayer. Double glazing should not be tilted. The surfaces of doors and windows shall be clean, flat and smooth, and the profiles shall not be damaged by virtual welding.
3. Party B shall strictly guarantee the construction period in the contract. If the construction period is delayed or abnormally delayed, the economic penalty of the owner and the project department shall be borne by Party B. However, if the construction period is delayed due to the following reasons, the construction period will be postponed after being confirmed by Party A:
A, increase workload changes and design changes
B. Party A shall notify the delayed entry.
C. Work stoppage for more than 8 hours due to reasons other than Party B's (such as power failure, civil cooperation, etc.). )
D, irresistible (refers to natural disasters)
E. Other opinions that Party A's representative agrees to postpone.
4. Carry out detailed design according to the design scheme and requirements provided by Party A, and report to Party A, the supervisor and the owner for review before processing. The process and installation quality shall be carried out in strict accordance with the requirements of the Standard for Quality Acceptance and Evaluation of Construction and Installation Engineering promulgated by the state.
5. Within one year after delivery, Party B shall guarantee the quality of the project or materials for free.
6. The main materials and auxiliary materials must meet the specified technical standards and can only be used after being accepted by Party A..
Article 3: Contract Method, Content and Price
1, the product production of this project adopts the lump sum method; The procurement, transportation, storage, processing, production and installation of its design materials shall be contracted by Party B. ..
2. As agreed by both parties, the settlement basis is the on-site profile frame molding size, and the contract price is/㎡, including tax ticket. The installation date and glass installation period of window frames and sashes shall comply with the provisions of Party A..
3. Party B shall process and manufacture in strict accordance with the design scheme and requirements confirmed by both parties. Otherwise, all rework and losses caused by this shall be borne by Party B. ..
4. Party B is responsible for on-site sampling inspection and on-site entity inspection when materials enter the site, as well as individual acceptance and bear relevant expenses. Party B is not responsible for energy-saving acceptance.
5. Party B is responsible for providing a complete set of relevant materials for plastic steel windows.
Article 4: Obligations of both parties
Party A:
1, responsible for providing design drawings and requirements, technical disclosure and change notice, general water and electricity supply, material stacking and office space, and quality supervision.
2. Assist Party B to protect the finished products on the construction site.
Party B:
3. Responsible for the production and installation of products and the cooperation and coordination of related types of work.
4, must strictly abide by the construction operation procedures and safety production management regulations. In the construction project, Party B shall be responsible for all safety accidents, and Party A shall not bear any responsibility.
5. Be responsible for on-site personnel and financial management, property management using all water, electricity and places of Party A and related safety measures.
Article 5: Method of Payment
1. Pay according to the progress of the project.
2. Pay Party B% of the total price of mechanical equipment and tools.
3, plastic steel window frame comes into play, after the installation, pay the total price.
4, window sash and glass comes into play to pay the total price.
5. Pay 10% of the total price when the window sash is installed.
6. Leave 5% as quality deposit after the completion acceptance, and pay the balance after the warranty period expires for one year.
Article 6: Both parties shall abide by it.
Party A and Party B shall strictly perform this contract. If either party breaches the contract, it shall be handled according to the relevant provisions of the Economic Contract Law.
Article 7: On-site representatives of both parties
Party A: Party B:
If there is any change in the workshop representative, the other party shall be notified seven days in advance.
Article 8: This contract shall come into effect after being signed and sealed by both parties, and shall automatically become invalid after the whole project is completed and accepted.
Article 9: Matters not covered in this contract shall be settled by both parties through consultation.
Article 10: This contract is made in duplicate, with each party holding one copy.
Party A: Party B: Tel: Tel:
date month year
3. Relevant clauses of the model contract for the sale of doors and windows;
★ 3 Model sales contract for doors and windows
★ Order 3 samples of door and window sales contract.
★ 3 Model sales contract for building doors and windows
★ Latest three door and window supply contracts
★ 3 samples of door and window order contract.
★ 3 classic wooden door purchase and sale contract templates.
★ Three procurement contracts for broken bridge aluminum profile samples.
★ The latest model of hardware and building materials purchase and sale contract.
★ 3 pieces of the latest concise glass supply contract model.
★ 5 samples of simple sales contract
var _ HMT = _ HMT | |[]； (function(){ var hm = document . createelement(" script ")； hm.src = "/hm.js？ fff 14745 ACA 9358 ff 875 ff 9 ACA 1296 B3 "； var s = document . getelementsbytagname(" script ")[0]； s.parentNode.insertBefore(hm，s)； })();