After the fixture passes through the belt connection station from the wave soldering outlet, if it is necessary to flow back to the imported plug-in line, the belt line is often used for transmission. This type of belt line is called a return line, and the return line flows to the end using photoelectric The switch controls the start and stop of the belt line motor, and the operator immediately transfers the next fixture after removing a fixture. . The length of the line is generally about 7 meters, the height is 750-800mm, and the width of the conveyor belt is 300-400mm. . . Or it can be customized according to your needs. We have done quite a lot of this kind of line.