As society develops step by step, we have more and more opportunities to use letters of commitment. Letters of commitment are unilateral expressions of intention and have no contractual effect. Have no clue when it comes to writing a commitment letter? Below are 9 production safety responsibility commitment letters that I have compiled for you. I hope they can help you. Safety Production Responsibility Commitment Part 1

In order to strictly implement the various rules and regulations on production safety, do a good job in labor protection, improve the self-protection awareness of all personnel, prevent violations and eliminate the occurrence of life-threatening accidents, Each department/construction team/professional subcontracting/labor subcontracting team (hereinafter referred to as Party A) now signs a "Safety Production Responsibility Letter" with each construction personnel (hereinafter referred to as Party B) to ensure mutual compliance.

1. Relevant parties signing the "Letter of Responsibility"

Party A: Party B:

2. Rights and obligations of both parties

1) Rights and obligations of Party A

1. Comply with the "Work Safety Law of the People's Republic of China" and other laws and regulations related to production safety, as well as the management of safety production and civilized construction of the project department It stipulates that we should strengthen production safety management, establish and improve the safety production responsibility system, improve safety production conditions, and ensure safety.

2. Ensure the capital investment necessary to ensure safe production conditions, and bear responsibility for the consequences caused by insufficient capital investment necessary for safe production.

3. Provide safety education and training to employees to ensure that they have the necessary production safety knowledge, are familiar with relevant safety production rules and regulations and safe operating procedures, and master the safe operation skills for their positions. Employees who have not received education and training on safety production are not allowed to work.

4. When adopting new processes, new technologies, new materials or using new equipment, you must understand and master its safety technical characteristics, take effective safety protection measures, and provide specialized safety production education to employees and training.

5. Set up obvious safety warning signs on hazardous construction operations and sites, related facilities and equipment.

6. Supervise and educate employees to strictly implement the unit’s safety production rules and regulations and safe operating procedures, and truthfully inform employees of the dangerous factors, preventive measures and accident emergency measures that exist in the workplace and workplace. .

7. Provide employees with labor protection supplies that comply with national standards or industry standards, and supervise, educate, and train employees to wear and use them in accordance with the rules of use.

8. The project department will give appropriate rewards to advanced individuals and activists who emerge in safety production; if patients with major safety hazards are discovered, the project department will give special awards.

9. Operators who violate regulations will be fined from 50 yuan to 1,000 yuan depending on the severity of the case (for specific penalties, please refer to the project department's "Project Construction Safety Violation Penalty System"). Party A has the right to punish those who refuse to change despite repeated admonitions. Advise him to leave.

10. For those who cause danger or minor accidents due to personal negligence or violation of regulations during production, Party A has the right to deal with them as follows depending on the severity of the case: warning, punishment, clearing the site and imposing a fine. .

2) Rights and obligations of Party B

1. The right to stop others from violating regulations and the right to refuse instructions that violate safety labor protection regulations and safe operating procedures. In the event of a serious life-safety crisis, the company has the right to stop operations and promptly report to the leadership for handling.

2. Obey the command and management of Party A’s leadership and safety management personnel, and do not operate in violation of regulations; wear and use personal labor safety protective equipment correctly.

3. Consciously accept pre-job safety education and training (not less than 40 hours). Those who have not passed the safety production training shall not be allowed to work on the job. Special operation personnel must receive special safety training in accordance with relevant national laws and regulations, pass the examination, and obtain the special operation qualification certificate before they can start working.

4. Strictly abide by various safety operating procedures. It is strictly prohibited to bring fire into the site and operate under the influence of alcohol. Consciously abide by labor disciplines, and are not allowed to work without permission. They are not allowed to fight, joke, or engage in other things unrelated to the work content while working, and must "do not harm themselves, do not harm others, do not be harmed by others, and do not leave hidden dangers to harm others." and yourself", it is strictly prohibited to bring irrelevant personnel into the construction site.

5. Actively participate in various safety activities organized by Party A and report accidents and safety hazards in a timely manner.

6. If a work-related accident occurs or causes harm to others due to personal violations, in addition to assuming responsibility for the accident, financial penalties will also be imposed depending on the circumstances; if a crime is constituted, criminal liability will be investigated and the area will be cleared. .

7. If Party A’s equipment or property is severely damaged due to violation of the production safety system, in addition to corresponding compensation, legal liability will be pursued in serious cases. Party A will pursue financial and criminal liability for individuals who maliciously damage equipment and property.

8. Party B is responsible for the management of safety protection devices and fire-fighting equipment within its jurisdiction, and is obliged to report in a timely manner if it finds that the facilities are not up to standard;

9. When working at the construction site due to personal reasons Those who go out for personal matters must bear their own safety responsibilities.

If you need to leave the project department for more than 24 hours, you must ask for leave or fill out a leave request form.

3. Others

1. All personnel who come to the project department must sign a "Responsibility Letter" when reporting and be able to consciously abide by safety regulations. Anyone who does not sign a "Responsibility Letter" No personnel are allowed to work.

2. During the period when the responsibility letter is signed, if the person in charge changes, the successor will perform all responsibilities for the implementation of the responsibility letter.

3. Matters not covered in this responsibility letter or other changes will be separately stipulated after consultation and study.

4. This letter of responsibility is valid for one year, from January 1, 20xx to December 31, 20xx.

5. This letter of responsibility is made in duplicate, with each party holding one copy. This "Responsibility Letter" shall take effect from the date of signing.

Employees:

20xx year month day

Person in charge:

20xx year month day safety production responsibility commitment letter 2

Department: XXX Position: As a responsible person, I will always put safety first, implement the safety production responsibility system, be responsible for the safety of employees in the department, and be responsible for the leaders in charge.

2. Conscientiously implement national laws, regulations, rules and standards, and perform the safety responsibilities of those in charge of business.

3. Strictly implement the company’s rules and regulations.

4. Organize employees in this department to conduct safety training, education and learning in accordance with regulations.

5. Organize safety inspections in the department and continue to investigate and manage safety hazards in the department.

6. Truthfully inform employees of the dangers and occupational hazards that exist in the workplace and work positions of the department, as well as preventive and emergency measures.

7. Do not give orders in violation of rules and regulations, and seriously investigate and deal with violations of rules and disciplines.

If I violate the above commitments or fail to perform safety production management responsibilities, resulting in a production liability accident, I am willing to accept the assessment stipulated in the relevant mining systems.

Commitment person: XXX

Safety production responsibility commitment letter XXXX, XX, month XX, Part 3

In order to fully implement the "Safety Production Law" and other safety laws laws and regulations to fully protect personal safety and health, family happiness, and the stable development of the enterprise. In its work, this department voluntarily signs and abides by the following commitments:

1. Implement safety regulations: adhere to "safety first, "Prevention first, comprehensive management" safety policy, firmly establish the ideology of "people-oriented, safety first", ensure the implementation of national and superior production safety laws, regulations, instructions and relevant rules, regulations and operating procedures in this department, Include safety work in the work plan and important agenda of production operations.

2. Insist on holding a certificate to work: new workers must be provided with three-level safety education, safety production discipline education, HSE management system education, and Education on the "Safety Production Operating Procedures" for the type of work, as well as various safety and public security management regulations and rules and regulations.

Personnel engaged in hazardous chemicals, or safety management personnel, or operating special equipment must be educated Qualification training, and work with a certificate.

3. Comply with the oil depot system: urge this department to consciously accept the closed and semi-military management of the oil depot, consciously abide by the oil depot access management system and safe operating procedures, and avoid violations of rules and disciplines phenomenon, there will be no signs of accidents, and employees' safety commitment of "three no harms" will be fully implemented. The team's "five-minute safety warning education before work" and "three-minute safety inspection before (after) work" activities will be fully implemented to prevent illegal operations and prevent An accident occurs. Comprehensively ensure the safety of the oil depot without accidents.

4. Carry out safety inspections: organize and implement the "three-level safety inspection" of the oil depot (i.e.: monthly inspection of the oil depot, weekly inspection of the department, and daily inspection of the safety officer), and promptly Stop illegal activities and promptly discover and eliminate safety hazards. For hidden hazards that cannot be eliminated or solved for a while, strong measures must be taken immediately and reported to leaders immediately.

5. Hidden hazards rectified within a time limit: discovered during inspections at all levels Potential safety hazards should be rectified according to the three-determination principle (designate designated personnel, set time, and determine rectification measures). If the department can rectify it itself, it should be rectified immediately; if it cannot rectify it itself, it should be reported to the oil depot for rapid rectification. Potential accident hazards must be eliminated quickly and comprehensively.

6. Convene regular safety meetings: Convene various regular safety meetings regularly to study, deploy and solve problems that arise in safety production; to achieve the "three stresses and six things" of safety production: that is, talk about safety production in everything, everywhere, and Speak every day, safety work has plans, arrangements, implementation, supervision, inspections, and results.

7. Emergency response: When emergencies such as fires, fires, oil leaks, etc., It is necessary to report to the fire and safety department and the company in a timely manner, and at the same time, the existing firefighting forces in the oil depot organize firefighting efforts to minimize losses.

8. Do a good job in labor protection and safety protection: supervise employees to wear anti-static clothing , wear safety helmets, do labor protection and safety protection to prevent accidents and prevent occupational diseases. Organize physical health examinations for employees. Adhere to the policy of safety first. When there is a conflict between production, equipment, efficiency and safety, adhere to safety as the priority Main.

9. Take the initiative to stop various unsafe behaviors: If any accident hazards or other unsafe factors are discovered, immediately report to the on-site production safety management personnel or the person in charge of the unit; the person who receives the report should promptly

10. Do a good job in on-the-job training: actively organize the department to learn business and safety knowledge, master labor operation skills, and continuously improve the professional level and work ability of employees. Do not violate regulations or give orders in daily work. Do not work in violation of regulations, do not violate labor discipline, and do not work blindly.

I will consciously abide by the above commitments. If there is any violation, I am willing to take responsibility.

This commitment letter will start from the date of signing. Effective.

Department: Department head (signature):

20xx production safety responsibility commitment letter 4

In order to effectively implement the "Safety Production "Law" adheres to the policy of "safety first, prevention first, comprehensive management", clarifies responsibilities, prevents accidents, and ensures the safety of highway maintenance, production and construction, employees' personal safety, mechanical equipment and materials, combined with the actual work of our unit, specially formulated this year Safety production

Target responsibility statement:

1. Safety production control indicators

1. Prevent the occurrence of major liability accidents that kill more than one person.

2. Prevent liability accidents with direct economic losses of more than 100,000 yuan.

3. Safety production mortality rate is controlled at 0.5‰.

4. The serious injury rate is controlled at 1.2‰.

2. The main tasks of safety production:

1. The leader in charge of administrative work must be in charge of safety and adhere to the principle of "five simultaneous" safety management work. That is: while planning, arranging, inspecting, summarizing, and evaluating highway maintenance and construction management work, plan, arrange, inspect, summarize, and evaluate safety management work.

2. Safety management must implement personnel, organization and measures.

Each unit must have a person responsible for safety affairs with clear responsibilities. If the members of the safety leading group change due to work changes, they must be adjusted and supplemented in a timely manner and reported to the bureau safety committee.

3. Carry out three-level safety education and safety technical training for special operations personnel. We must resolutely put an end to the "three violations (illegal operations, illegal command, and violation of labor disciplines)". Once various safety accidents occur, we must carefully fill in the work safety accident report form and deal with it seriously in accordance with the principle of "four no-misses".

4. Do a good job in implementing emergency rescue plans for flood-damaged highways in flood season and clearing snow and ice on sloping sections of roads in winter to ensure smoothness.

5. Strictly investigate and deal with serious violations of over-limit transportation. Strengthen road maintenance and the installation of safety signs and markings, as well as the improvement of dangerous bridges and dangerous roads, and further implement safety assurance projects.

6. Adhere to the regular inspection and assessment system and the monthly and quarterly safety management reporting system. Each unit under the section must conduct a safety production inspection and hold a work meeting on preventing production safety liability accidents every month, study and solve major safety production issues, and arrange safety production work; safety reports implement a zero reporting system (report an incident if there is an incident, report an incident if there is no incident) ), 1 point will be deducted for each late report, and 2 points will be deducted for each missed report.

III. Reward and Punishment Regulations:

1. If no personal or mechanical accident occurs throughout the year, and the comprehensive inspection and assessment score is above 95 points (including 95 points), reward; score is 90 Those with scores above 90 points (including 90 points) will be rewarded; those with scores above 75 points (including 75 points) will not be rewarded.

2. A general accident of less than 20,000 yuan will be punished with a fine of RMB 20,000.

3. In the event of a major accident (including temporary employment), a one-vote veto system will be implemented and a fine of RMB 100,000 will be imposed.

4. If various types of accidents occur and are not reported in time or are concealed, they will be fined RMB 100,000 according to the circumstances after detection, and the person responsible for the accident will be punished according to the circumstances and relevant requirements.

IV. Supplementary Provisions:

According to the specific requirements of the target responsibility letter, the county section will be assessed once a month.

This target responsibility letter is made in duplicate, with each section and the unit being assessed holding one copy. Safety Production Responsibility Commitment Letter Part 5

1. Fulfill job safety responsibilities, be responsible for the safety of the enterprise, the safety of the department, the safety of employees, and the safety of yourself. You must dress in accordance with the regulations when you are on duty.

2. Consciously abide by various safety management laws, regulations, systems and regulations of the country, industry and company (unit), obey management, wear and use labor protection equipment correctly, and be consistent with "violation of regulations, paralysis, incompetence" Fight against the three enemies of "responsibility" and strive to "do no harm to yourself, no harm to others, and no harm to others" (three no harm).

3. Comply with all laws, rules, systems and regulations on safety management, do not drive while fatigued, do not drive under the influence of alcohol, do not lend the vehicle to persons without a driver's license, and do not use mobile phones or watch movies while driving. information.

4. Comply with various laws, rules, systems and regulations on fire management, actively learn knowledge about fire extinguishing and fire escape, and be familiar with the use of various fire extinguishing equipment and escape routes.

5. In daily work, do not give illegal orders, do not work illegally, and do not violate labor disciplines (three no violations)

6. Consciously accept the safety of the company (unit), department, and team Disclosure and technical disclosure, consciously implement various safety measures required for safety disclosure and technical disclosure, do not take chances, and equipment operators must strictly follow the equipment operating procedures.

7. Take the initiative to stop the unsafe behaviors of colleagues, and immediately report to the on-site production safety management personnel or the person in charge of the unit if any accident hazards or other unsafe factors are discovered; the person who receives the report should deal with it in a timely manner .

8. Actively participate in various safety trainings and safety learning, safety activities, and accident emergency drills organized by the company, master the safety production knowledge required for operations, improve safety production skills, and enhance accident prevention and emergency response capabilities .

I promise: I have received safety education for this position and am familiar with all the contents of the safety production responsibility commitment letter. I am willing to implement it seriously. If I violate this commitment, I am willing to bear the corresponding responsibilities.

Department:

Commitment person:

Type of work:

XXXXXXXXXXXXXXXX Co., Ltd.

Safety in 20 years Production Responsibility Commitment Part 6

1. Conscientiously implement the "Work Safety Law of the People's Republic of China and the People's Republic of China" and firmly establish the safety work policy of "safety first, prevention first, comprehensive management", Be loyal to your duties and do not take the risk of neglecting your duties.

2. Really perform the safety work responsibilities of this position, enhance the concept of law and discipline, consciously abide by rules and regulations, proceed from safeguarding national interests and collective interests, obey management, and implement compliance with rules and regulations and operations according to rules into specific operational activities middle.

3. Consciously accept safety production education and training, master the safety production knowledge required for your job, improve safety production skills, and enhance accident prevention and emergency response capabilities.

4. Be familiar with the safe operating procedures and safety skills of your job, and achieve "five understandings": understand the location of special dangerous places (locations) of your job; understand that the workplace (location) of your job is toxic Hazardous factors; understand the safety matters that must be observed in the workplace (location) where one works; understand the emergency rescue handling requirements in the workplace (location) where one works; understand how to use protective facilities in the workplace (location) where one works .

5. Strictly abide by the unit’s production safety regulations and operating procedures, and wear and use labor protection equipment correctly.

6. The alarm bell is always ringing for safety production, and safety awareness must be constantly raised to ensure that I do not harm myself, I do not harm others, and I do not get harmed by others.

7. If you discover any hidden dangers or other unsafe factors, report them immediately to the construction management personnel, actively do a good job in rectifying hidden dangers in the workplace (location) where you work, and consciously care for and use safety protection devices correctly. , safety signal devices, safety signs and other safety devices.

I promise

I have received job safety education and training, understand the hazards and preventive measures that exist in my job (workplace), and am familiar with the safety production responsibility commitment letter Regarding relevant content, we are willing to strictly abide by the unit's safety production rules and regulations and operating specifications, and obey management. If we violate this commitment, we are willing to bear corresponding responsibilities.

Commitment person (signature) project department (seal) 20xx year, month and day safety production responsibility commitment letter 7

In order to effectively prevent and eliminate various accidents during operations at high altitudes on slopes To eliminate unsafe factors and achieve the twin goals of "safe engineering" and "excellent engineering", this contracting company has made the following commitments:

1. Ensure that restricted areas are marked out, fences are added, and Hang relevant safety warning signs.

2. Develop a construction safety management responsibility system and safety operating procedures, equip the construction site with full-time safety officers, and conscientiously implement various construction safety management regulations.

3. All workers must undergo safety education and operational skills training, and workers working at heights must have corresponding work qualification certificates.

4. Persons suffering from epilepsy, mental illness, hypertension, anemia, arteriosclerosis, organic heart disease and others who are not suitable for working at heights shall never be used to work.

5. All kinds of operating tools required during the operation must comply with relevant national regulations and requirements, and safety operating procedures must be strictly implemented.

6. All safety preparations must be made carefully before construction. Check that the ropes, rigging, seats, seat belts, safety helmets, safety nets and other equipment used during the operation are complete and intact, and are in accordance with regulations. Wear protective gear and have a safety net ready.

7. Ensure that no serious injuries, deaths or other accidents occur during the construction process, and the minor injury accident rate is controlled below 2‰.

8. The contracting enterprise is willing to consciously accept the supervision of the contract-issuing unit, the owner, the supervisor, the work safety supervision and management department and all walks of life on the safety production conditions of the work site.

Commitment person (signed and sealed):

Year, month and day safety production responsibility commitment letter 8

All members of our company’s leadership team represent all employees, Seriously perform safety production responsibilities at work, faithfully implement various safety work system regulations, and solemnly promise to the group:

1. Strictly abide by national laws and regulations, and adhere to the implementation of "safety first, prevention first" policy, effectively implement the safety production responsibility system for personnel at all levels, and strive to achieve controllable, under-control and controllable safety production.

2. Establish and improve the production safety assurance system and supervision system, improve the production safety command system, improve the safety management and assessment system, formulate key work requirements and measures to achieve the unit’s annual safety production goals, and follow up Check implementation.

3. Carry out safety evaluation work in power grid dispatching, operation, maintenance and other production work, carefully analyze and pre-control dangerous points, vigorously carry out standardized operations, and conduct safety inspections on production and work sites Scientifically analyze, identify weak links and potential accident risks, and take effective preventive measures in a timely manner.

4. Ensure the investment of safety funds and equip safety facilities, equipment, and equipment that meet the needs of safe production; provide employees with labor protection supplies that comply with national standards or industry standards, and urge them to wear and Use; constantly improve equipment protection facilities, conduct regular equipment maintenance, keep complete records, conscientiously improve safety production conditions, and strive to achieve intrinsic safety.

5. Carry out regular and irregular safety inspections in the unit, carefully search for various safety hazards, eliminate hidden dangers in a timely manner, and report the investigation and rectification of hidden dangers in a timely manner.

6. Implement effective monitoring and supervision of major hazard sources and key parts prone to accidents; implement emergency measures for key parts and key positions, establish a regular patrol inspection system; formulate emergency rescue plans for safety accidents, and conduct regular inspections drill.

7. Regularly provide safety training and education for all employees in the unit, and continuously improve the safety awareness and safety skills of employees. Ensure that 100% of unit leaders, safety management personnel, and special operations personnel are certified to work, summarize and promote advanced experience in safety production, and commend advanced safety models.

8. Strengthen the construction of safety culture in the unit, organize all employees to carry out ideological and political work closely around the unit's safety production situation, and use various vivid and effective forms to educate employees on safety thinking and dedication Education on spirit and compliance with rules and disciplines has enabled employees to establish a strong "safety first" mentality.

9. Conscientiously implement the policies, regulations and provisions of the state and superiors on the protection of electric facilities, fire safety and anti-electricity theft, and effectively manage the safety of electric facilities under the jurisdiction of the unit to ensure the safety of electric facilities. Safe operation. Improve the security management system, implement safety precautions, organize regular security and fire safety inspections and fire drills, and cooperate with the local public security department to investigate and deal with external damage and fire accidents.

10. Participate in industrial and commercial insurance in accordance with the law, pay insurance premiums for employees, and pay compensation to casualties in accidents in accordance with relevant national regulations.

11. If I violate the above commitments, I am willing to bear corresponding legal responsibilities and accept corresponding administrative penalties.

Commitment unit (seal):

Signature of the safety manager:

Signature of the deputy director:

Commitment time: year, month, day /p>