Current location - Trademark Inquiry Complete Network - Futures platform - What should I pay attention to when I want to buy a Skoda Ming Rui car?
What should I pay attention to when I want to buy a Skoda Ming Rui car?
Step 1: Look at the car chassis and battery.

Come down and see if the car is low in oil stains and the chassis is greasy; There is nothing to see about the new car battery, just look at whether the connector is corroded and whether the small window is green. Note that battery connectors are generally loose and must be tightened before driving away.

Step 2: Pull out the dipstick and see the color of the oil.

Someone wants to say, aren't they all 0 kilometers? What is there to see? There is something wrong with the dealer. Some cars ran for many kilometers, but the odometer was not connected, or more than ten kilometers, pretending to be 0 kilometers! When watching, turn off the engine after three minutes, pull out the dipstick and wipe it with a paper towel to eliminate the oil black.

Step 3: Listen to the engine.

This can only be done by feeling. The operation method is: hit two cars, you stand in the middle position, and the distance between the two cars is equal. If you feel a loud noise (obviously louder than other cars), you can turn around and listen again to avoid the illusion that your ears are different.

Step 4: Listen carefully to the engine sound.

You should open the front cover of any car, as long as it is the first time, put one end of the screwdriver on the engine and the other end on the ear to listen to the sound. It is the accumulation of experience. The more serious you are, the less likely the Zhuang family is to be careless with you.

Please explain it in detail here, so that you can hear whether the engine has abnormal noise, such as ringing, knocking on the cylinder, valve ticking and so on. A good engine has only one' grunt' sound and no other noise. However, this method depends on the accumulation of experience consciously at ordinary times, and it is not clear to say one or two sentences. Anyway, just listen to the car more.

Long-winded: when someone can help, let him step on the gas pedal to increase the engine speed first, and then listen to the sound. Then let him block the exhaust port with a rag. If the engine is obviously loud and stops in a few seconds, it is a good car! Otherwise, there is air leakage somewhere.

Step 5: check the workmanship to see if each line is connected and shaken. You'll see for yourself, so don't say much.

Step 6: Look at the appearance of the whole vehicle.

Some people will say, are you just looking at your appearance at this time? Of course, this is not picking a used car. If there are scratches on the appearance, the car won't stop there waiting for you to pick it out. The dealer will handle it early in the morning. I want you to see if the gaps in the door are equal. In addition, when looking at the appearance, you should also pay attention to whether the glass is original or not, and there is a mark on the bottom of the glass, so as to avoid that the result of your careful selection is an accident car (which has never been seen before).

In addition, a small J.S. can basically handle it seamlessly, and it can't be seen without very careful observation. But if the tire is injured in an accident, it can't be repaired as long as J.S. doesn't change it, so we should focus on the tire. If it is damaged, the car will not be considered immediately!

Step 7: You should get into the cockpit. Dealers say that those who can't wait to get into the cockpit to pick up the car are novices! I am most afraid of those who walk around the machine for a long time and don't get into the cockpit. There is nothing to say here. Check whether all kinds of buttons and switches are effective according to the instructions. Adjustment of lighting, acoustics, air conditioning, seats, safety belts, electric windows, etc. It should be tested one by one. Don't listen to dealers, they always tell you: "Don't worry, they are all new cars! What's the matter? Don't!

It should be emphasized that the choice of clutch and brake is almost impossible, because many dealers are not allowed to test drive now, and they can only rely on their feelings:

1, when the car is cold: put all gears on the clutch to ensure that all gears are smooth.

2. When the car is cold: step on the clutch to shift gears, and then release the clutch to shift gears. Some gears are loose, making it difficult to engage and disengage. This is the contrast between cars.

3, when the car is hot (many dealers do not allow the car to be picked when the engine is hot, regardless of him, insist on doing so! Repeat the process of 1

4. Don't change gears when it is hot, and brake hard. Be sure to carefully understand the depth change of the brake pedal! Require the same depth every time, but don't step on the bottom, otherwise it will be adjusted.

Procedures to be handled after buying a car

What procedures should I go through after buying it?

1. You must show your ID card when buying a car.

2. With the car payment, you can go to the vehicle management department to apply for a temporary mobile license. Many automobile sales markets provide one-stop car purchase services, and mobile licenses can be handled at the place where the car is purchased.

3. It is valid to submit an application for car purchase to the industrial and commercial department where the automobile sales unit is located, and affix the industrial and commercial ticket inspection stamp.

4. Check the car. Newly purchased cars need to be inspected at the designated inspection yard, and the license plate can only be obtained after passing the inspection. When checking the car, you need to bring your certificate, car purchase money, owner's ID card and vehicle certificate.

5. Pay the purchase surcharge. Pay the vehicle purchase surcharge to the vehicle purchase surcharge collection office where the vehicle is purchased, and the amount is 10% of the purchase price (excluding VAT).

(1) Original proof of car purchase (stamped by the administrative department for industry and commerce) and 2 copies;

(2) 1 vehicle certificate and its copy;

(3) The personal vehicle holds my identity certificate;

(4) Personal vehicles shall be paid in cash.

(5) After receiving the vehicle license from the vehicle management department of the public security, the vehicle owner shall return to the collection office with the vehicle driving license and the vehicle purchase fee certificate for filing. The staff of the collection office is responsible for filling in the "license plate number" of the certificate and affixing the seal of "filed". The owner can file the file at any time by cash payment.

6. Pay road maintenance fees at the local road maintenance collection office.

7. Pay the insurance premium in the insurance company.

8. Obtain a vehicle license plate. To get a license from the vehicle management department, you need to bring the following documents: car purchase certificate, owner's ID card, insurance policy, purchase fee sheet, vehicle inspection certificate, etc.

9. documents. Go back to the surcharge collection office for the record, and then go to the local tax office to pay the vehicle and vessel use tax and receive the "tax" card.

10, personal vehicle, owner has driver's license and driver's license registration.

Six Skills of Cheating in 4S Stores

This is posted in the main community. Reading is very helpful. I'm here to study with you.

Six Skills of Cheating in 4S Stores

Method 1: You go to the 4S store to buy a car. They don't have the color and model you want for the time being, so they will transfer the car to other companies, nominally called transfer, but in fact your interests are completely destroyed. There is a simple reason. Once there is something wrong with your car, they won't give you an invoice. They can refuse to let you go to the billing company based on the contract, but the billing company only buys in the name of the dealer, not the direct customer, so they will not be responsible, resulting in the invoice and contract. Sorry, then hehe, you will become a ball.

Method 2: If you have a long negotiation with 4S stores, you will find out why they always change colors and models in the exhibition hall. There is a simple reason. The cars in the exhibition hall will be cheaper than the market price every two months, so they will be sold to customers at 500 or 1000. Maybe you'll think there's nothing wrong with showing cars, as long as they're cheap. However, the shady thing is that during the abusive process of thousands of customers in two months, the exhibition car will definitely scratch the paint or damage some small parts, and often the cars in your hand are repainted. No one wants the newly bought little wife to be mentally ill n times.

Method 3: Fuzzy concept If you go to a 4S store to buy a car, there will be delivery fees, service fees and miscellaneous fees when they negotiate the final price. In fact, if you are willing to spend some time with them, these expenses can be waived. Let's talk about insurance premiums. Now 4S says that insurance won't make you any money, and it will give you a 30% discount or something. In fact, if you ask the insurance company yourself, you can get a 50% to 60% discount, and a basic phone call can save 300 yuan to 600 yuan.

Method 4: Time Transfer If you go to a 4S shop, they give you a cheaper price, but tell you that you don't have a car now, and ask you to sign a contract and pay a deposit to give you a car within a few weeks (note that the deposit is fixed, not fixed). Actually, it's about jet lag. The price of a car will change over a period of time, just like futures. For example, the price of a car on the market now is 100000, and the price of 4S is 98000, but it is agreed with him to deliver the car two weeks later. I can guarantee that the market price will be below 98,000 in two weeks. Because car prices will only go down, not up. But in case the price rises in two weeks, hehe, the 4S shop will start dragging its tactics, either telling you that the car hasn't arrived yet or telling you that it's still on the road or something. Until the price is profitable. If you lose patience and want to return the car, the concept of deposit deposit comes. Although the contract you signed with 4S is a formula contract, all 4S contracts are of the same sex, and the deposit is non-refundable for any reason.

Method 5: disclaimer If you want to get a foreign license, I guess you won't sleep well until you get a license on the bus. Why? Hehe, because the licensing in some areas is very unstable now, such as Wuxi or Yangzhou and Nanjing. Good for a while and bad for a while. However, 4S stores will let you sign an authorization agreement or something before authorization (the name of each store is different). The danger is that the process of licensing is to pay the purchase fee to Jiangsu local national tax first, and then hand over the materials to the vehicle management office for licensing. It's in two places. Once you can't get a card, the card purchase fee will not be refunded. At that time, the agreement will come in handy This agreement will definitely protect 4S stores, and they will get away with it. We can only wait and wait. When can you get the card? If you really go to court, I can guarantee that you 1% have a good chance of winning.

Method 6: Preferential service Now, when signing a car purchase contract with you, 4S shops often send decoration 2000, maintenance 2000 and maintenance gold cards. In fact, these are all fake. For example, the market price of a car is 1 1000, and they will say that I want you to pay 9000 plus 2000 for decoration and 2000 for maintenance, which adds up to at least 13000. Think about it. It's a good deal. In fact, the best you can do in the decoration of 2000 is to buy a foot pad and add a card frame. If you have a conscience, I'll give you a bottle of "Smell Spit" brand perfume. The cost of decoration is only 300. Maintenance is more terrible. Their 2000 100% cost won't let you offset the cost of parts, it's just the cost of working hours, and it can't be deducted at one time. Then you've never repaired it in their shop in your life. Besides, there is nothing wrong with a new car. Even if something goes wrong, there is a 2-year, 6-kilometer claim guarantee from the manufacturer, not to mention anything broken. If you touch it, the insurance company can pay for it in full. When do you think it will run out in 2000? Therefore, the decoration of 2000 and the maintenance of 2000 are basically virtual. In fact, the car price you got was not the market price 1 1000 but 9300.

Then everyone must ask me how to buy a car. There's only one way. Only light, no other services are needed. Go to several stores to ask about the price first, and then don't do insurance or discount, which is a cash discount. The insurance company calls itself to let the insurance company do it. Remember to ask the 4S shop for the user manual after picking up the car, so that you can enjoy the same maintenance treatment in any 4S shop and ensure that they have no two words. And now the competition in 4S shops is fierce, so you can basically save your working hours by repairing cars. At least I'll give you a 30% discount. So with the user manual, it doesn't matter where you bought the car.

Recently, many riders' cars (new cars) have reached the mileage and are ready to make the first insurance. Many friends are discussing the speed increase of new cars. Now I will share with you the related concepts and operation methods I know as follows. If there is any mistake, please correct me.

Turn up the speed-the purpose of turning up the speed here is to make the engine run at high speed, not at high speed.

The purpose of increasing the speed is to make the engine use the viscosity of engine oil to run in or burn off the carbon deposits in the engine and keep the engine in good condition.

First of all, it is necessary to ensure the internal drawing speed. Reasonable and correct casting speed will not only do no harm to the engine, but also better run-in the cylinder block and prolong the service life of the engine.

In fact, the high speed should be properly pulled during the running-in period. Pay attention to the running-in period. The pulling process is gradual and gradual. Not less than 2500 rpm before the first insurance. 5000 turns immediately after the first insurance.

During the running-in period, the speed control should be adjusted according to the mileage:

The mileage is 0000- 1500km. Keep the speed of any gear below 2500 rpm. Don't accelerate too fast.

1600-2000km mileage can be pulled within 3000 rpm. Don't accelerate too fast.

The mileage is 2 100-2500km, and the speed can be pulled within 4000 rpm. Don't accelerate too fast.

The mileage of 2600-3000km can be pulled within 5000 rpm. Don't accelerate too fast.

The first maintenance can be done after 3000 kilometers, especially MT.CVT can be delayed to about 4000 kilometers, depending on personal situation.

It is necessary to increase the speed before the first maintenance. During the running-in period, the engine will run in some iron filings. Most of it will be mixed with engine oil and sink into the oil pan under the engine. A small part will be attracted by the magnetic oil drain screw. Therefore, before maintenance, increase the speed, let the oil flow quickly, and stir up the iron filings in the oil pan. Due to the viscosity of engine oil, iron filings will sink slowly. Then go to repair it right away. Drain the oil and let all the dirty things come out. This is more effective.

In fact, it's not just about pulling the highway before the first insurance. The drawing speed is also applicable before each maintenance. You should pull it and fix it right away. The purpose is to eliminate the carbon deposit in the engine and make the engine cleaner by changing the oil.

Pay attention when pulling the highway for the first time. It needs to be pulled several times.

Pull it for about 10 minutes, and then don't turn off the engine. Wait for a quick rest for 5 minutes, and then pull 10 minutes. Repeat 3 times. The effect is better. The engine is protected above 5500. Because high temperature will destroy the protective layer and viscosity of oil, it is not needed after the first maintenance. You can pull at will.

Don't be afraid to pull to the red turn zone when pulling the expressway. Even if it is pulled to the red turn area, it is no problem. Now all new cars are basically protected by computers. It doesn't matter. When the speed reaches 6500 rpm, the computer will automatically cut off the gasoline circuit.

Finally, remind all riders to pay attention to safety when pulling the expressway, be careful of pedestrians and vehicles, try to go to sections with few cars and good road conditions, and pay attention to traffic police.