Material selection
The material of aluminum veneer is usually divided into two kinds: ordinary aluminum alloy and aluminum magnesium manganese alloy. Compared with ordinary aluminum alloy, Al-Mg-Mn alloy has better hardness and corrosion resistance, and its price is relatively high.
size measurement
Before determining the price of aluminum veneer, it is necessary to measure the required size. Generally speaking, the thickness of aluminum veneer is 1.5mm-3.0mm, and the commonly used specifications are 1220mm*2440mm and 1500mm*3000mm. If you need non-standard aluminum veneer, you need to provide detailed dimensions and drawings.
Price calculation
The price calculation of aluminum veneer is usually calculated by area. The specific calculation method is as follows:
Price = area * unit price
Among them, area = length * width, unit price = material price+processing cost.
The material price refers to the price of the aluminum veneer itself, and the processing cost includes the cost of cutting, bending and punching. The calculation of processing cost is usually based on the unit price of each process.
Price influencing factors
The price of aluminum veneer is influenced by many factors, such as material, size, processing technology and quantity. Generally speaking, the price of Al-Mg-Mn alloy is about 20%-30% higher than that of ordinary aluminum alloy, and the aluminum veneer price of non-standard size will be increased accordingly. In addition, the complexity and quantity of processing technology will also affect the price.