Latest price of H-beam
Longchang CIL-456? H-beam? Quotation: ￥37 10.00
Longchang CIL-456? H-beam is a new type of economical building steel. Longchang CIL-456? H-beam section shape is economical and reasonable, and its mechanical properties are good. When rolling, all points on the cross section extend evenly and the internal stress is small. Compared with ordinary I-beam, H-beam has the advantages of large section modulus, light weight and metal saving, which can reduce the building structure by 30-40%. Because the legs are parallel inside and outside and the ends of the legs are at right angles, the welding and riveting workload can be saved by 25%. It is often used in large buildings (such as workshops and high-rise buildings) that require large bearing capacity and good cross-sectional stability, as well as bridges, ships, lifting and transportation machinery, equipment foundations, supports, foundation piles, etc.
Lund TDTEI-28? H-beam? Quotation: ￥46 10.00
Lund TDTEI-28? H-beam has wide flange and high lateral stiffness. Strong bending capacity, about 5%- 10% higher than I-beam. The two surfaces of the flange are parallel to each other, which makes the connection, processing and installation simple and convenient. ? Compared with welded I-beam, it has the advantages of low cost, high precision, small residual stress, no need for expensive welding materials and weld detection, and saves the manufacturing cost of steel structure by about 30%.
Fu Xie PGH-2? H-beam? Quotation: ￥2730.00
Fu Xie PGH-2? Under the same section load of H-beam, hot rolled Fuxi PGH-2? Compared with the traditional steel structure, the weight of H-beam structure is reduced 15%-20%. Compared with concrete structures, Fu Xie PGH-2? H-beam structure can increase the usable area by 6% and reduce the structural weight by 20%-30%, thus reducing the internal force of structural design. H-beam can be processed into T-beam, and honeycomb beam can be combined into various cross-sectional forms, which greatly meets the requirements of engineering design and production. Fu Xie PGH-2? The flange width of h-beam is basically the same; Mainly used for steel core columns in reinforced concrete frame structure columns, also known as rigid steel columns; Columns mainly used in steel structures can usually be applied to steel bearing supports of industrial structures.
H-beam structure
H-beam is a new type of economical building steel. H-beam section shape is economical and reasonable, and its mechanical properties are good. When rolling, all points on the cross section extend evenly and the internal stress is small. Compared with ordinary I-beam, H-beam has the advantages of large section modulus, light weight and metal saving, which can reduce the building structure by 30-40%. Because the legs are parallel inside and outside and the ends of the legs are at right angles, the welding and riveting workload can be saved by 25%. It is often used in large buildings (such as workshops and high-rise buildings) that require large bearing capacity and good cross-sectional stability, as well as bridges, ships, lifting and transportation machinery, equipment foundations, supports, foundation piles, etc.
H-beam is an economical beam with good mechanical properties, which is developed from I-beam optimization, especially the section is named after the English letter "H". Its characteristics are as follows:
Wide flange and large lateral stiffness.
Strong bending capacity, about 5%- 10% higher than I-beam.
The two surfaces of the flange are parallel to each other, which makes the connection, processing and installation simple and convenient.
Compared with welded I-beam, it has the advantages of low cost, high precision, small residual stress, no need for expensive welding materials and weld detection, and saves the manufacturing cost of steel structure by about 30%.
Under the same section load, the weight of hot-rolled H steel structure is lighter than that of traditional steel structure 15%-20%.
Compared with the concrete structure, the hot-rolled H-beam structure can increase the usable area by 6%, while the self-weight of the structure is reduced by 20%-30%, thus reducing the internal force of structural design.
H-beam can be processed into T-beam, and honeycomb beam can be combined into various cross-sectional forms, which greatly meets the requirements of engineering design and production.
In the steel market, the most important thing for us to buy H-beam is our experience and our feelings. Therefore, whenever we buy every H-beam, we will choose the H-beam with appropriate price and good quality. Then, in the end, Bian Xiao hopes that everyone can understand and know the latest price of H-beam through the method recommended by Bian Xiao. That's all for Bian Xiao's introduction today. Thank you.