The tail plug of the mobile phone is broken and annoying. Being unable to charge electricity is simply a contemporary torture. How to replace the tail plug of mobile phone? Many friends want to change it themselves. The following small series introduces the whole process of replacing the tail plug of the mobile phone in detail. Friends who won't come to see it.

1. First, turn off the mobile phone, and make sure it is turned off and replaced.

2. Remove the screen. First, find two small screws next to the charging port of the mobile phone, slowly rotate the screws with a pentagonal screwdriver, then fix them directly above the home button with a suction cup, hold the body of the mobile phone, gently pull out the suction cup, then use a pry piece to plug into the gap between the screen and the body, and slowly pry the screen down.

3. Disconnect the battery.

4. Remove the motor. Unscrew the screw that fixes the motor with a pentagonal screwdriver, and then gently take it out with tweezers.

5. Remove the speaker.

6. Equipment heating.

7. Remove the tail plug cable and replace it.

8. Finally, install the removed originals in turn. In this process, every screw should be tightened, and the original factory parts that have been removed should be put back gently in turn. First, the speaker should be installed, and then the motor and deceleration equipment should be installed to complete the maintenance.

Matters needing attention

1. It is not recommended that disabled persons replace themselves;

2. Be careful in the replacement process, and don't be impatient. There must be a screw!

Living related donor

1 1.29