1, safe following distance

When driving, the front and rear vehicles must keep a safe distance, which can give the driver of the rear vehicle time to react when the front vehicle brakes or decelerates. At the same time, it is necessary to keep a proper distance from other vehicles, on the one hand, to prevent the front vehicle from suddenly braking and causing rear-end collision, on the other hand, to prevent vehicles in other lanes from merging into their own front at will.

Most novices are afraid of being too close to the car and being rear-ended, so they like to widen the distance from the front car, which is actually a bad habit. It is recommended that the owner practice repeatedly in various road conditions. When driving, they can refer to the following distance of vehicles in the next lane and verify it by themselves, but the practice process should be gradual, and the following distance should be from large to small until it is reasonable.

2, novice driving turning skills

Before driving into the corner, I suggest you step on the brakes to slow down the car. After driving to the corner at low speed, choose the turning route and correct the direction, then step on the accelerator to accelerate.

3. Turn on the turn signal when connecting.

The parallel line must be carried out without affecting the normal running of other vehicles, and preparations need to be made in advance. Look at the situation before and after the driveway, focusing on the driving situation of the vehicles to be merged into the driveway. I would like to remind novice drivers to turn on the turn signal in advance when merging, determine the distance behind the car, then accelerate into the lane to be merged, return to the steering wheel after entering the lane completely, and return the turn signal to its original position.

4. It is very important to switch between far and near light when walking at night.

Driving at night, because the light is dim and the target is unknown, has many disadvantages compared with driving during the day. Many novices drive at night and turn on the high beam in order to see more clearly.

There is nothing wrong with this in itself, but if you encounter an oncoming car, you must switch the high beam, because under the strong light of the high beam, the oncoming car is equivalent to a "blind" state, and you can't see the road ahead at all, which puts both sides in danger.

If you are in the urban area or on a road section with good lighting conditions such as street lamps, don't turn on the high beam. Pay special attention to pedestrians on the roadside when driving at night, pay attention to whether there are retrograde pedestrians, pedestrians sitting on the roadside, and sundries piled up on the roadside.

5. Look at the rearview mirror before stepping on the brakes.

Many novices will ignore this point and take braking measures immediately in case of emergency ahead, but it is very dangerous, especially on the highway. Because if the rear car is close to the car and the speed is fast, the front car will suddenly brake, which will easily cause the two cars to rear-end. If the rear car is a big truck with weak braking performance, then emergency braking is tantamount to hitting a stone with an egg.

The correct way to deal with it is to look at the rearview mirror before suddenly braking. If a vehicle is close to it, it is safer to change lanes and brake suddenly. After braking suddenly, turn on the double flashing warning and immediately warn the rear car.

6. Observe and slow down after crossing the road.

Get into the habit of looking around when crossing the intersection. No matter whether there are vehicles at this intersection, whether the intersection is a cross or a T-shape, you should look at both sides. Be sure to slow down when watching, and then accelerate when you are sure that there is nothing abnormal at the intersection. This habit can largely avoid accidents.