1060 requires high corrosion resistance and formability, but not high strength. Chemical equipment is its typical use.
1 100 is used to process parts that require good formability and high corrosion resistance but do not require high strength, such as chemical products, food industry devices and storage containers, thin plate processed parts, deep-drawing or spinning concave vessels, weldments, heat exchangers, printed boards, nameplates and reflective appliances.
1 145 packaging and heat insulation aluminum foil, heat exchanger
1 199 electrolytic capacitor foil and optical reflective film
1350 wires, conductive stranded wires, buses and transformer belts
20 1 1 requires screws and machined products with good cutting performance.
20 14 is suitable for occasions requiring high strength and hardness (including high temperature). Aircraft heavy-duty, forgings, thick plates and extruded materials, wheels and structural components, first-stage fuel tanks for multi-stage rockets and spacecraft components, truck frames and suspension system components.
20 17 is the first 2XXX alloy used in industry, which has a narrow application range, mainly including rivets, general mechanical parts, structural parts of structures and transport vehicles, propellers and accessories.
Aircraft structures, rivets, missile parts, truck hubs, propeller parts and other structural parts.
2036 Automobile Body Sheet Metal Parts
Structural parts and weapon structural parts of 2048 aerospace vehicle
2 124 aerospace structure
Piston of 22 18 aircraft engine and diesel engine, cylinder head of aircraft engine, impeller and compressor ring of jet engine.
22 19 space rocket welded oxidizer tank, supersonic aircraft skin, structural parts, working temperature -270~300 degrees celsius. Good weldability, high fracture toughness and high stress corrosion cracking resistance in T8 state.
23 19 alloy covered electrode and filler solder for welding and drawing.
26 18 die forgings and free forgings. Piston and aero-engine parts
2A0 1 Structural rivet with working temperature less than or equal to 100℃.
Axial compressor blade 2A02 of turbojet engine operating at 200~300℃.
2A06 aircraft structure with working temperature of 150~250℃ and rivets for aircraft structure with working temperature of 125~250℃.
The strength of 2A 10 is higher than that of 2A0 1 alloy, and rivets for aircraft structures with working temperature less than or equal to 100℃ can be manufactured.
2A 1 1 Medium strength structural members, propeller blades, building structural members of vehicles and airplanes. Medium strength bolts and rivets for aircraft
2A 12 Aircraft skins, partitions, ribs, beams and rivets. Structural parts of buildings and transport vehicles.
2A 14 Free forgings and die forgings with complex shapes
2A 16 Spacecraft components working at 250~300 degrees Celsius, welded containers and airtight cabins working at room temperature and high temperature.
2A 17 Aircraft parts with working temperature of 225~250℃.
2A50 Medium Strength Parts with Complicated Shapes
2A60 aero-engine compressor impeller, guide wheel, fan, impeller, etc.
2A70 aircraft skin, aircraft engine piston, guide wheel, wheel disc, etc.
2A80 aero-engine compressor blades, impellers, pistons, expansion rings and other parts with high working temperature.
2A90 aero-engine piston
3003 is used to process parts and components that require good formability, high corrosion resistance and good weldability, or work that requires both these properties and higher strength than 1XXX alloy, such as kitchen utensils, food and chemical products processing and storage devices, tanks and tanks for transporting liquid products, and various pressure vessels and pipelines processed with thin plates.
The tank body of 3004 all-aluminum tank requires parts with higher strength than 3003 alloy, chemical products production and storage equipment, sheet metal processing parts, building processing parts, building tools and various lamps and lanterns parts.
3 105 Room partitions, baffles, roof panels of mobile homes, gutters and downpipes, sheet forming parts, bottle caps, bottle stoppers, etc. 3A2 1 Aircraft fuel tank, tubing, rivet line, etc. ; Building materials and food and other industrial equipment.
Similar to 3003 alloy, 5005 has medium strength and good corrosion resistance. Used as conductor, cooker, dashboard, shell and architectural decoration. The anodic oxide film is brighter than the oxide film on 3003 alloy, which is in harmony with the color tone of 6063 alloy.
5050 sheet can be used as refrigerator and freezer lining, automobile air duct, oil pipe and agricultural irrigation pipe; It can also process thick plates, pipes, bars, special-shaped materials and wires.
5052 This alloy has good formability, corrosion resistance, candlelight, fatigue strength and moderate static strength, and can be used to manufacture aircraft fuel tanks and oil pipes, as well as sheet metal parts, instruments, street lamp brackets and rivets, hardware products, etc. of traffic vehicles and ships.
5056 magnesium alloy and cable sheath rivet, zipper, nail, etc. Aluminum clad wire is widely used in processing agricultural insect traps and other occasions requiring high corrosion resistance.
5083 is used in places that need high corrosion resistance, good weldability and medium strength, such as welding parts of ships, automobiles and aircraft plates; Pressure vessel, refrigeration device, TV tower, drilling equipment, transportation equipment, missile parts, armor, etc. Strict fire prevention measures are needed.
5086 is used in places that need high corrosion resistance, good weldability and moderate strength, such as ships, automobiles, airplanes, cryogenic equipment, TV towers, drilling rigs, transportation equipment, missile parts and decks.
5 154 Welded structures, storage tanks, pressure vessels, ship structures and offshore facilities, and transport tanks.
5 182 plate is used to process cans, automobile body panels, steering wheels, reinforcements, brackets and other parts.
5252 is used to manufacture high-strength decorative parts, such as automobile decorative parts. After anodic oxidation, it has a bright and transparent oxide film.
5254 containers for hydrogen peroxide and other chemical products
5356 Welding Al-Mg alloy covered electrode and welding wire with magnesium content greater than 3%
Welding structures, pressure vessels and pipelines of 5454 offshore facilities.
5456 steel plate, high-strength welded structure, storage tank, pressure vessel and ship material.
5457 Decorative parts of automobiles and other equipment that have been polished and anodized.
5652 Storage containers for hydrogen peroxide and other chemical products
The decorative parts of 5657 cars and other equipment have been polished and anodized, but in any case, the materials must have a fine grain structure.
5A02 aircraft fuel tank and conduit, welding wire, rivet, ship structural parts.
The strength welded structure, cold stamping parts, welding container and welding wire in 5A03 can be used to replace 5A02 alloy.
5A05 welded structural parts, aircraft skin skeleton
5A06 welded structural parts, cold die forgings, welded container stress parts, aircraft skin bone parts 5A 12 welded structural parts, bulletproof deck.
6005 extruded profiles and pipes are used for structural components that require strength and height greater than 6063 alloy, such as ladders and TV antennas.
6009 automobile body panel
60 10 table: automobile body
606 1 requires various industrial structures to have certain strength, high weldability and corrosion resistance, such as pipes, rods, profiles and plates used for manufacturing trucks, tower buildings, ships, trams, furniture, mechanical parts and precision machining.
6063 industrial profiles, building profiles, irrigation pipes and vehicle extrusion materials, benches, furniture, fences, etc.
Extrusion materials for 6066 forgings and welded structures
6070 Heavy-duty welded structures, extrusion materials and pipes for automobile industry
6 10 1 gong * * High-strength bars, conductors, heat dissipation equipment for automobiles, etc.
6 15 1 is used for die forging crankshaft parts, machine parts and production rolling rings, which requires good malleability, high strength and good corrosion resistance.
620 1 high strength conductive rod and wire
6205 thick plate, pedal and high impact extrusion
6262 is a threaded high stress part, and its corrosion resistance is better than that of 20 1 1 and 20 17 alloys. 635 1 is an extrusion structure for vehicles, and it is a pipeline for conveying water and oil.
6463 profiles of buildings and various electrical appliances, as well as automotive decorative parts with bright surfaces after anodic oxidation treatment.
6A02 Aircraft engine parts, forgings and die forgings with complex shapes.
7005 extrusion material is used to manufacture welded structures with high strength and fracture toughness, such as trusses, bars and containers of transport vehicles; Large heat exchangers, and parts that cannot be solid-solution treated after welding; It can also be used to make sports equipment, such as tennis rackets and softball bats.
7039 refrigerated containers, cryogenic instruments and storage boxes, fire-fighting pressure equipment, military equipment, armor plates and missile devices.
7049 is used to forge parts with the same static strength as 7079-T6 alloy, which require high stress corrosion cracking resistance, such as aircraft and missile parts-landing gear hydraulic cylinder and extrusion parts, which have roughly the same fatigue performance as 7075-T6 alloy, but slightly higher toughness.
Plates, extrusions, free forgings and die forgings of 7050 aircraft structural parts. The requirements of alloy for manufacturing such parts are: high spalling corrosion resistance, stress corrosion cracking ability, fracture toughness and fatigue resistance.
Aluminum foil and ultra-thin strip of 7072 air conditioner; Cladding of 22 19, 3003, 3004, 5050, 5052, 5 154, 606 1, 7075, 7475, 7 178 alloy plates and tubes.
7075 is used to manufacture aircraft structures and futures. He requires high-stress structural parts and molds to have high strength and strong corrosion resistance.
7 175 is used for forging high-strength structures of aircraft. T736 material has good comprehensive properties, namely, high strength, spalling corrosion resistance, stress corrosion cracking resistance, fracture toughness and fatigue strength.
7 178 is used to manufacture high compression yield strength parts of aerospace vehicles.
Aluminum clad and non-aluminum clad plates, wing frames, longitudinal beams, etc. For the 7475 fuselage. Other parts with high strength and fracture toughness.
7A04 aircraft skin, screws and stress parts, such as girders, frames, ribs, landing gear, etc.