What does pa mean on the drawing?

Pa means planting area. The full name is plant area, which is the first letter of the two words. Mainly used in construction drawings. What does i=1:8 mean on the drawing?

The most commonly used method of expressing slope is the percentage of the elevation difference between two points and their horizontal distance. The calculation formula is as follows: slope = (elevation difference/horizontal distance) x100% When expressed as a percentage, for example: a slope of 3% means that for every 100 meters of horizontal distance, the vertical rise (fall) is 3 meters; 1% means that for every 100 meters of horizontal distance, the vertical rise (fall) is 1 meter. What does ⊥￠0.2 mean on the drawing?

It is estimated that the perpendicularity of the axis relative to the reference surface is within the range of a cylinder with a diameter of 0.2 mm (oscillation). What does FL mean on the drawing?

Architectural drawings: "FL" represents the elevation of the finished surface (Finish Level)

Water professional drawings: What does the wastewater riser pJT represented by "FL" mean on the drawings?

This is hard to say, it depends on how to use it. Generally speaking, it is divided into scheme drawings, construction drawings and as-built drawings. According to the functions used, there are: floor plan, elevation plan, layout plan, node plan, embedded parts plan, laying out plan, keel plan, numbering plan, etc.

What does Foundation plan mean on the drawings

foundation plan

un.Basic floor plan, fund plan, basic plan

Basic plan; Foundation plan; foundation plan

Example filter

1.

In China, our foundation plan is also processing.

In China , our fund plan is also in progress.

2.

Discussion on foundation plan of multi-purpose building in a converting station

Discussion on foundation plan of multi-purpose building in a converting stationjkl(1)200* What does 700 mean on the drawings

That is for the purpose of numbering the drawings. Generally, there is a construction, construction, facility, and electrical installation in front of it to distinguish the types of work. It is also for the convenience of the construction workers. The front is Number them according to the construction sequence. The main purpose behind it is to let the construction workers take a look at the drawings. If the amount of work is large, letters may be added to make it easier to read the drawings. What does the German vordreh mean on the drawings?

Vordreh means: "Rotation (after angle) mark" UPS power supply, what does it mean on the drawing?

UPS should be an uninterruptible power supply, also commonly known as an inverter , the function is to charge and store a certain amount of electricity when there is mains power, and automatically supply power to important electrical devices temporarily during a power outage. What does sta 12+948 mean in the drawing?

sta

abbr.

stationary stable; statement report; station station; stator stator

network

station; stand; station