Bicycle lights are lights installed on bicycles for cyclists to ride at night. Installing bicycle lights can make your riding safer. Generally speaking, the common types of bicycle lights are headlights, headlight reflective lights, rear luminous lights, reflective pedal lights, frame side lights, light bars, light bars, front wheel light bars, front wheel light bar reflective lights and so on. So how should we choose the bicycle lights that suit us? Let's look at the details! 1. What are the bicycle safety lights?

1. Headlights. This is essential, and it is the safety guarantee for driving at night. Install a lamp holder in the front of the car, and then insert the charging LED lamp into the lamp holder. Because it is rechargeable, there is no need to replace the battery, and the LED consumes less power, so it can be illuminated for a long time, and the focal length and illumination distance can be adjusted, which is very convenient.

2. Front reflector. It is necessary to install this kind of lamp to effectively reflect the other party's light when a car comes, so that the other party can find it in time. Moreover, under the irradiation of headlights, the reflective distance of this reflective lamp is farther than that of headlights. In the case of good urban road lighting, the opposite car can find itself without turning on the headlights.

3. Taillight. This light is installed under the rear frame, and there are many ways to emit light, which can warn the vehicles behind. This lamp has a manual switch, which can be turned off under good lighting conditions.

4. Reflective footlights. There are reflective lights on the sides of both pedals, so no matter whether there is a car coming in front or behind, it can reflect light when it is illuminated. When the rear light is turned off, as the pedal moves up and down, the reflection effect is also very good, and a light can be seen swinging up and down from a distance.

5. Frame side lights. There are manual switches and various lighting modes, giving warning lights to the left and right.

6. Strip lights. Installed on the rear wheel beam, it is manually switched, illuminated in various ways, and gives warning lights to the left and right sides.

7, strip reflective lights. Installed on the rear wheel longitudinal beam, it passively reflects light and gives a warning to the left and right lights.

8. Front wheel strip light. Manual switch, multiple lighting modes, left and right lights alarm. And with the rotation of the car side, the ring light flashes.

9. Front wheel strip reflector lamp. Passive reflection device, sending reflection warning to the left and right. With these safety lights, it is very eye-catching on the road at night, and a light warning can be given at a certain distance to ensure safety.

Second, the skills of choosing bicycle lights

1, first understand the basic knowledge of headlights. Bicycle lights are divided into self-generating type and battery-powered type. According to the installation position, the car lights are divided into: front lighting, rear warning light and wheel light. Generally speaking, the light sources of car lamps are as follows: tungsten bulb, HID and LED. These basic knowledge should be known, so as not to cause the lamp to be bought home, and I don't know what kind.

2, the unit of light is lumen, the greater the lumen number, of course, the brighter the headlights. Is it safer to buy the brighter the car lights? This is absolutely wrong. Whether your light is on or not can illuminate the front, but you should also consider whether the other side of the meeting is dazzling. It is a safe choice to distinguish each other's positions. Don't choose to use a strong flashlight as a simple car light.

3. When riding at night, the requirement for lighting is that the floodlight should be good, the light spot should be large, and it is not required to illuminate far. The low beam should be illuminated in a large area, and there should be a clear cut-off line between light and shade, so as not to interfere with the coming cars. This is the range we need to consider when choosing headlights.

4. The requirement of lighting equipment for riding at night is high seismic performance, because riding a bicycle may encounter uneven roads. If the seismic performance is not good, the gear will suddenly jump and the lights will go out, which will easily cause danger. Secondly, the headlights that ride at night should also have a certain rain-proof function, because no one can say what kind of weather a cyclist will encounter. There is no lighting in rainy days, and safety is a hidden danger.