Tear off the chicken part of the label first, and then apply some hand cream, cream and the like on the remaining label. Wipe it with a soft towel for a while. Don't scrape the cup with an iron brush or something.

After the trademark on the cup was torn off, the glue was still on it. How to remove it?

1, soak in hot water for a while, and you can take it off.

2. Wipe it with essential balm, and it will fall off after a while. Just try it.

You can try the eraser. But at first, you may feel that the more you rub, the dirtier you get. But if you rub it for a long time, you will see the effect. This method is tiring and requires perseverance.

4. soak in water, put a little detergent, and then brush with an old toothbrush.

5. Wipe with a cloth dipped in alcohol or spirit Erguotou.

Last winter, I bought a stainless steel basin and baked it on the heater. The label is easy to remove, leaving no trace.

There are also the following things I found online for your reference:

Trademark law for removing stickers

There are always some labels on newly bought stainless steel pots or glassware. After the label is torn off, it is difficult to remove the traces left by the adhesive on it. Wipe with a wet cloth and scrape with a knife, which often leaves traces. After many times of practice, I summed up some tips to share with you.

For the self-adhesive marks on the surface of hard objects, we can apply grease-free nail polish remover on the surface of the object, and then gently wipe it with a soft cloth; These traces can also be removed with industrial alcohol or gasoline. If these stickers stick to the panel, you can also remove them with lemon juice.

In addition, hand cream can also achieve the effect of removing adhesive. Hand cream contains a lot of water (generally above 70%) and a certain amount of surfactant. Surfactant has good wetting, penetrating and dissolving ability, and can quickly penetrate between the adhesive and the surface of the object, thus achieving the purpose of cleaning. You can also find some similar products, such as face cream, facial cleanser and detergent, which have the same effect.

For the stubborn adhesive on the carpet, the best way is to carefully trim the adhesive traces on the top of the carpet fluff.

How to remove the sticker marks on the cup?

1, completely soak the adhered place with wind oil essence, 15 minutes later, wipe it off with a dry rag. If the dirt is difficult to remove in the sea, you can extend the soaking time of the wind oil essence, and then rub it hard until it is clean.

2. Turn the hair dryer to the maximum heat, blow on the tape trace for a while, let it soften slowly, and then easily wipe off the offset printing with a hard eraser or a soft rag.

Scope of application: This method is suitable for articles with relatively small tape traces and long offset printing time, but the articles should have sufficient heat resistance.

3. Dip a dry dish cloth in white vinegar or vinegar, and completely cover the labeled part to make it completely soaked. After soaking for 15-20 minutes, wipe it off gradually along the edge of the self-adhesive label with a dish cloth.

Uncover the trademark on the cup, how to remove the sticky water left after 20 minutes?

There are four square factories for removing viscose:

(1) Apply toothpaste to the glue and wipe it off bit by bit with a wet rag.

(2) Dip the cotton in vinegar, then apply the soaked cotton to the glue, so that the whole double-sided adhesive is soaked, and then we can slowly remove the glue bit by bit with nails or rulers.

(3) Drop essential balm on the viscose, and then wipe it clean with a wet cloth.

(4) Use an eraser, which may be dirty at first, but the effect will come out after rubbing for a long time.

After the trademark on the cup was torn off, the glue was still on it. How to remove it?

2. Wipe it with essential balm, and it will fall off after a while. Just try it.

You can try the eraser. But at first, you may feel that the more you rub, the dirtier you get. But if you rub it for a long time, you will see the effect. This method is tiring and requires perseverance.

4. soak in water, put a little detergent, and then brush with an old toothbrush.

5. Wipe with a cloth dipped in alcohol or spirit Erguotou.

Last winter, I bought a stainless steel basin and baked it on the heater. The label is easy to take off, leaving no trace.

There are also the following things I found online for your reference:

Trademark law for removing stickers

For the self-adhesive marks on the surface of hard objects, we can apply grease-free nail polish remover on the surface of the object, and then gently wipe it with a soft cloth; These traces can also be removed with industrial alcohol or gasoline. If these stickers stick to the panel, you can also remove them with lemon juice.

In addition, hand cream can also achieve the effect of removing adhesive. Hand cream contains a lot of water (generally above 70%) and a certain amount of surfactant. Surfactant has good wetting, penetrating and dissolving ability, and can quickly penetrate between the adhesive and the surface of the object, thus achieving the purpose of cleaning. You can also find some similar products, such as face cream, facial cleanser and detergent, which have the same effect.

For the stubborn adhesive on the carpet, the best way is to carefully trim the adhesive traces on the top of the carpet fluff.

How to remove the label sticker from the cup?

1, wipe with cloth dipped in alcohol.

2. Sprinkle talcum powder (prickly heat powder) and gently take it out with your fingers.

3. Wipe with degreased oil, which can be bought at all gas stations. Wipe the label surface with cotton dipped in vinegar.

4. Bake it slightly on the fire or blow it on the label with a hair dryer for a while, then rinse it with clear water, or you can easily tear off the label.

How to remove the trademark sticker from the glass?

In my experience, first put the cup in water for 8- 10 minutes, then wrap the label with plastic wrap to let the water seep in and wait for a few hours. It's easy to tear. It's better than a hair dryer. . . . . . .

How to remove the label from the stainless steel cup? Online, etc

The first method: soak the cup in the washing liquid released with warm water for 3~5 minutes, and then wash it off easily.

The second method: put the wind oil essence on it and wait for a while, then gently wipe it with your hands, and you can go down. Just rinse it with water again.

How to remove the traces left by the original trademark on the newly bought thermos cup

Apply a little moisturizer or vaseline to the stem marks, cover them with quick plastic wrap, and then take off the plastic wrap and wipe it again later. This is taught in CCTV's ingenious program.

How to remove the trademark from the cup?

There are two kinds: one is to calculate how much you tear off, and then use the torn things to remove the glue that still sticks to the cup, and attack the glue in a sticky way, haha.

Second, don't touch the water, blow with a hair dryer and use hot air. It is said that it can be torn off. Give it a try and tell me.