Self-adhesive labels are generally affixed to machines, computers, metals, plastics and other items or outer packaging for product identification or warranty labels.

It is often difficult for people to tear off this label. Even if the content of the label on the surface can be removed, the adhesive on the bottom layer is not easy to remove.

The following introduces several methods for removing stickers: 1. Metal needle removal method: You need to prepare a metal needle or toothpick (the thinner, the better), and an eraser. Pay attention to gently lifting it from one end (be careful not to exert force in the direction of the object being attached, but be sure to exert force outward). In this way, it is possible to pick off a larger area at once (don't let the dropped labels fall on other things, otherwise they will become secondary pollution). There will also be residual glue when the strength is different.

2. Eraser: For some surfaces with residual sticker marks, you can also wipe them with an eraser, and then remove the hair left by the eraser.

3. Direct trimming: If there is stubborn self-adhesive on the carpet, you can carefully trim off the self-adhesive traces on the top of the carpet pile without affecting the quality of the carpet.

4. Hair dryer: For the self-adhesive on plastic products, you can use the hot setting of the hair dryer to heat the self-adhesive, and then slowly tear it off. However, almost every household has a hair dryer, and using a hair dryer can also remove annoying labels. Use the hot air from a hair dryer to blow onto the label, but keep a certain distance and do not get too close or continue blowing for too long. When the label is slightly hot when you touch it with your hands, you can use your fingernails or tweezers to try to lift it up from the corners of the label. Since the sticker becomes less sticky when heated, it is easier to peel off than when it is dry. However, it does not change from glue to water after adding heat. The stickiness is still there. When tearing, don't tear it too fast or too hard. You must be careful and patient. It is best to lift the surface at a 45-degree angle to the original surface. " Lift it up, rather than tug and tear it. As long as you are patient, the label can be peeled off intact without leaving any offset marks on the box.

5. Hot water: For the remaining traces, first wet the towel with hot water, then wipe it repeatedly on the traces of the sticker, then dip the wet towel into soap, wipe it repeatedly on the traces, and then Just wipe off the soap suds with a clean warm wet towel.

6. Lemon juice: If these stickers get on the skin, you can use lemon juice to remove them.

7. Hand cream: Hand cream can also achieve the effect of removing stickers, because hand cream contains a large amount of water, and the water contains a certain amount of surfactants. This surfactant has good wetting, penetrating and dissolving abilities, and can quickly penetrate between the sticker and the surface of the object to achieve the purpose of removal. Some similar products, such as facial creams, facial cleansers and dishwashing detergents can also be effective.