Tools: cling film, car film, baking gun.
1. First, spread two large bath towels on the front cover and instrument panel, put on the chair cover, and wrap it tightly with plastic wrap to prevent damage during pasting.
2. Clean every piece of glass thoroughly, mainly taking care of the top of the glass, and be careful of some small particles of impurities.
3. Spray a small amount of window film installation liquid on the outer surface of the window glass, cover the soft mold on it, carefully slide and position it, and then cut it. In the process of shearing operation, the automobile film is firmly adhered to the glass. Then cut the window film according to the mold.
4. Apply the window film installation liquid on the glass, and then attach the film. Try two people to cooperate with the film, which can reduce bubbles and be smoother.
5. Almost all windows are not flat, so the baking gun can accurately shrink and form the window film on the compound curved surface of most windows. Eliminate wrinkles on the surface.
6. Next is the internal film. Now spray the window film installation liquid evenly. After that, put on the film.
7. Immediately after each window film is fixed in the final position, spray the installation liquid on the surface of the window film again to lubricate the extrusion surface. Then connect the water with the Yangtze River Delta plastic scraper.
8. Finally, use cotton cloth to suck out the water squeezed out by the window. It's over.