The product labels on the stainless steel basins bought in the kitchen are difficult to peel off, or it is difficult to tear them off cleanly, and the glue left behind is very ugly. How to remove the glue on the stainless steel basin? Let me teach you how to remove the glue on the stainless steel basin.

1. Use a paper towel dipped in some alcohol (industrial alcohol is better, or medical grade is acceptable) to wipe it, rub it a few times and tear it clean.

2. Use acetone. The method is the same as above. The dosage is small and thorough, and the great thing is that it can remove these residual gums very quickly and easily, better than alcohol. Both of these are solvents, and they are also the most effective methods.

3. Use nail polish remover. Usage is also the same as alcohol acetone. The effect is also very good. There is no requirement for the quality of nail polish remover, good or average will do, as long as it can remove nail polish, it will work.

4. Use hand cream. First tear off the printed product on the surface, then squeeze some hand cream on it, rub it slowly with your thumbs, and rub it for a while to remove all the remaining glue. Just a little slower. Hand cream is a greasy substance and its properties are incompatible with glue. This feature is used to remove glue.

5. Use banana water. It is an industrial agent used to remove paint, and it is easily available (sold wherever paint is sold). The method is the same as alcohol acetone.

6. Mix dish soap and water and apply it on the label. The label should be completely soaked. Then cover the label with plastic wrap. It should be sealed and transparent. Wait for about 5 minutes to remove it. As for the plastic wrap, you can see that the label will fall off with just a slight pull. When doing this cleaning, you should remove the packaging on it: such as paper scraps on stickers or plastic films on anti-counterfeiting labels.

7. Apply wind oil essence to the residual glue; wipe it back and forth with paper towels (or other things that can be wiped, but you should choose cheaper ones). This method will make the residual glue thinner, but because of the oiliness of Fengyoujing, there will be a layer of greasiness on the object. If you don't like it, you can use a greasy detergent to wash it again.

8. Soak in hot water for a while, or use a hair dryer to heat the glue to remove it, and then peel it off. When the weather is cold in winter, you should cover it for a longer time. It will be easier to uncover it when the weather warms up.