2. Processing and manufacturing device for laminated glass: According to the design requirements, separate the measured dimensions, confirm the glass dimensions, and the degree and vertical position, which will be processed and manufactured by the manufacturer. Install the stainless steel glass claw. After the glass is temporarily fixed, stop adjusting. Adjust the specifications horizontally, vertically and horizontally.
3. Anti-rust painting treatment of tricycle carport: slag and splash should be removed, and the surface of stainless steel parts should be sprayed with white paint for many times. The thickness of paint and paint film should meet the design requirements or construction standards.
4. Glue up and down: thoroughly clean the gaps between the glasses, without water, grease, paint, rust, cement mortar, dust, etc. Clean the bonding surface thoroughly and make it boring. So as to adjust the depth of the seam and prevent three-sided adhesion. Stick maintenance tapes on both sides of the joint to prevent the glass from being polluted. Apply sealant from top to bottom at the same time. After glue injection, polish the appearance of glue joint to remove excess glue.
5. Adjustment and inspection of tricycle shed: Stop the overall adjustment and inspection of point glass, and adjust the specifications horizontally, vertically and horizontally.