Technology Transfer Contract

Technology Transfer Contract

Project Name: ＿＿＿＿＿＿＿＿＿＿＿

Transferee:

（甲方）＿＿＿＿＿＿＿＿＿＿＿＿

转让方：

（乙方）＿＿＿＿＿＿＿＿＿＿＿＿

签订地点： 省市（县）

签订日期: Year Month Day

Validity Period: Year Month Day to Year Month Day

According to the provisions of the "Technology Contract Law of the People's Republic of China", both parties to the contract transfer the This project is part of the plan ※), and this contract was signed after consensus reached through consultation.

1. Content, requirements and degree of industrial development of non-patented technology:

2. Technical information and materials and their submission deadline, place and method:

Party B shall provide Party A with the following technical information at (location) and in a manner within 3 days from the effective date of the contract:

3. ※The scope and confidentiality period of the technical secrets of this project:

4. ※Scope of using non-patented technology:

Party A: Party B*

5. Acceptance standards and methods:

Party A uses this item After trial production, if the technology reaches the technical indicators listed in Article 1 of this contract, it will be accepted according to the standard and adopted method, and the party will issue a technical project acceptance certificate.

6. Funds and payment methods:

(1) Total transaction amount: Yuan.

Among them, the technology transaction amount (technology usage fee): Yuan.

(2) Payment method (using the following method):

①Lump-sum payment: Yuan, time:

②Instalment payment: Yuan, time: :

Yuan, time:

③ Commission based on % of profit, period:

④ Commission based on % of sales, period:

⑤Other methods:

7. Calculation method of liquidated damages or loss compensation:

In case of violation of this contract, the breaching party shall comply with Article 40 and Article 40 of the Technical Contract Law Article 1 and Articles 76 and 77 of the Implementation Regulations of the Technical Contract Law provide for liability for breach of contract.

(1) If the Party violates the Article 1 of this Contract, the Party shall bear the liability for breach of contract. The method and amount of breach of contract shall be as follows:

(2) The Party shall bear the liability for breach of Article 1 of this Contract The liability for breach of contract, the method of liability and the amount of breach of contract are as follows:

(3)

8. Contents of technical guidance (including location, method and fee):

9 , Provision and sharing of subsequent improvements:

The subsequent improvements referred to in this contract refer to the innovations and improvements made by either party or both parties to the technical achievements that are the subject of the contract during the validity period of this contract. The parties agree that subsequent improvements to the technical achievements subject to this contract will be completed by the party, and the results of subsequent improvements belong to the party.

10. Dispute resolution:

If a dispute occurs during the performance of the contract, both parties shall negotiate to resolve it, or they may request mediation.

If both parties are unwilling to resolve the dispute through negotiation or mediation, or if negotiation or mediation fails, the parties shall agree to adopt the following method to resolve the matter.

(1) Any dispute arising out of this contract shall be submitted to the Arbitration Commission for arbitration;

(2) Resolved according to judicial procedures.

11. Explanation of nouns and terms:

12. ※Others (including the intermediary’s rights, obligations, service fees and payment methods, deposits, property mortgages, guarantees and other matters not covered in the above terms): ①

┌—┬——————┬———————————————————— —┐

│ │Name (or name)│ (Signature) │

│ ├——————┼——————┬—————— ————————┬——————┤

│ │Legal representative│(signature and seal) │ Authorized agent│(signature and seal) │

│Accepted ├——————┼——————┴——————————————┴——————┤

│Let│ contact person│ (signature ) │

│方├——————┼——————————————————————————┤

│ │ Residence│ │

│ │(Correspondence address)│ │

│A├——————┼———————————— ——┬————┬——————┤

│ │ Telephone│ │Electronic hookup│ │

│Fang├——————┼—— ————————————┴————┴——————┤

│ │Bank of account│ │

│ ├———— ——┼——————————————┬————┬——————┤

│ │Account number│ │Postal code│ │

├—┼——————┼————————————┴————┴——————┤

│ │Name (or Name)│ (Signature) │

│ ├——————┼——————┬————————————┬——————┤

│ │Legal representative│(signature and seal) │ Authorized agent│(signature and seal) │

│Transfer├——————┼——————┴ ——————————————┴——————┤

│Let│Contact Person│ (Signature) │

│Fang├—— ————┼——————————————————————————┤

│ │ Residence│ │

│ │(Correspondence address) │ │

│B├——————┼————————————┬————┬—————— ┤

│Fang│ Telephone│ │Electronic Hanger│ │

│ ├——————┼——————————————┴—— ——┴——————┤

│ │Bank of account│ │

│ ├——————┼———————————— ——┬————┬——————┤

│ │ account

No. │ │Postcode│ │

├—┼——————┼————————————┴————┴——————┤

│ │Unit name│ (official seal) Year, month, day│

│中├——————┼————┬—————————— ——————┬————┤

│ │Legal agent│(signature and seal)│ Authorized agent│(signature and seal) │

│ ├—— ————┼————┴————————————————┴————┤

│ │Contact person│ (signature) │

│Introduction├——————┼——————————————————————————┤

│ │ Residence │ │

│ │(Correspondence address) │ │

│ ├——————┼——————————————┬— ————┬——————┤

│ │ Telephone│ │Telephone│ │

│Fang├——————┼———————— ——————┴————┴——————┤

│ │Bank of account│ │

│ ├——————┼———— ————————————┬————┬——————┤

│ │Account number│ │Postal code│ │

└—┴— ————┴——————————————┴————┴——————┘

Where the tax stamp is pasted

————————

┌—————————————————————————————————— ┐

│Registration authority review registration column: │

│ │

│ Technology contract registration authority (special seal) │

│ Person in charge (signature and seal) 19th year month day │

└—————————————————————————————— ————┘

Note: ① The terms marked with ※ in this contract must be filled in according to the instructions.

Filling Instructions

1. How to fill in the "Contract Registration Number":

The contract registration number is fourteen digits, and the first and second digits from the left are In the Gregorian calendar year number, the third and fourth digits are the province, autonomous region, and municipality codes, the fifth and sixth digits are the prefecture and city codes, the seventh and eighth digits are the contract registration point number, and the ninth to fourteenth digits are the contract registration serial number. If there are insufficient digits in the above number, zeros should be filled in. Each regional code should be filled in according to the regulations of GB2260-84. (The contract registration serial number is determined by each region)

2. Technology transfer contract refers to a contract entered into by the parties regarding the transfer of patent rights, transfer of patent application rights, patent implementation licenses, and transfer of non-patented technologies. This contract applies to non-patent technology transfer contracts, patent rights transfer contracts, patent application rights transfer contracts, and patent implementation license contracts, and is signed using the text of the patent technology contract.

3. Projects within the plan should be filled in the plans at the ministries and commissions of the State Council, provinces, autonomous regions, municipalities directly under the Central Government, cities under separate planning, prefectures, and cities (counties). Projects that do not belong to the above plans are indicated by a (/) in this column.

4. The scope and confidentiality period of technical secrets:

Refers to the content of the technical confidentiality obligations of each party, the geographical scope of confidentiality and the start and end time of confidentiality, and the liability for leaking technical secrets responsibility.

5. Scope of use of non-patented technology:

Refers to the geographical scope and specific methods of using non-patented technology.

6. Others:

If the contract is signed through an intermediary agency, the intermediary contract should be included as an attachment to this contract. If both parties agree on a deposit, property mortgage and guarantee, a copy of the deposit payment, property mortgage and guarantee procedures shall be attached as an attachment to this contract.

7. When entrusting an agent to sign this contract, a certificate of entrustment shall be issued.

8. In this contract, any clause that the parties agree does not need to be filled in should be marked (/) in the blank space of the clause.