What are the characteristics of hot melt adhesive film in the field of clothing trademarks? There are many materials for clothing trademark badges, but most of them are textile fabrics with polyester fiber as the main raw material. The requirements of clothing trademarks for hot melt adhesive film mainly focus on the adhesive performance and washability of products, which not only ensures that the products will not be opened for permanent use during routine use, but also ensures that the products will not delaminate after repeated washing. Based on the above requirements, it is recommended that you use TPU hot melt adhesive film and PO hot melt adhesive film products.

TPU hot melt adhesive film

XJU 120 hot melt adhesive film for clothing trademark is a TPU hot melt adhesive film with release paper. Its main component is polyurethane, which is transparent in color, elastic and excellent in washing resistance. It has good adhesion to various textiles and can meet the requirements of the above products. When choosing XJU 120TPU hot melt adhesive film, it is recommended to choose the thickness of 0.08-0. 15 mm, and the specific thickness is determined according to the thickness of the trademark badge. Usually, the thicker the badge, the thicker the hot melt adhesive film to ensure its adhesion fastness and product quality.

PO hot melt adhesive film can also be used in the field of clothing trademarks.

XJO 1 15 is a PO hot melt adhesive film with backing paper. Its main component is polyolefin, which is transparent, inelastic and washable. It can be used to bond various fabrics and basically meet the requirements of trademarks for the performance of hot melt adhesive films. The difference between PO hot melt adhesive film and TPU hot melt adhesive film is that the cost of PO hot melt adhesive film is lower, which is about 60% of the selling price of TPU hot melt adhesive film. The disadvantage is that the adhesive performance will be slightly worse than that of TPU hot melt adhesive film, and the feel will be more stiff. Therefore, it is recommended to choose a relatively thick PO hot melt adhesive film with a thickness of 0.10 mm-0.15 mm. The thick PO hot melt adhesive film can ensure the firm adhesion of the product without opening, and has a high cost performance.

XJO 1 15 hot melt adhesive film

Well, this is the answer to the hot melt adhesive film for clothing trademark badges. Friends who have any questions about this article or need samples can also leave comments below, and I will continue to update the relevant questions and answers later, looking forward to your continued attention!