1. Snow melting agent should be stored 5~10cm away from the wall.

Extended information:

2. Storage requirements: First of all, it can be packed when leaving the factory or in bulk. Packaged products should be marked with the product name, specifications, trademark, grade, production unit and this specification number on the package. There should be concealments during transportation and should not be mixed with goods that may cause product contamination. Products should be stored to avoid contamination by dust and other debris and avoid rain. If the packaging is not damaged, it can be kept for many years without clumping, melting or deterioration. Be careful not to break the packaging bag during transportation or handling. If the packaging bag is damaged, the packaging should be replaced in time, and moisture absorption is strictly prohibited. Inventory goods should be stacked neatly, protected from light and moisture, and facilitate ventilation, access, and storage. In a warehouse with good heat protection and sealing properties, the bottom should be padded to prevent the warehouse floor from being damp and absorbing water after touching the ground. The warehouse can be equipped with a thermometer and desiccant. It can also be equipped with a dehumidifier. When the humidity is high, the moisture in the warehouse can be extracted according to the situation. It should be sealed and stored before and after use. Try to use it once after opening the bag. If it is not used up, the bag must be tightened immediately to prevent moisture absorption. This product is easy to absorb moisture, so it should be stacked and stored in a cool, dry room to avoid exposure to the sun and rain; it should be covered to prevent moisture when stored in the open air.