1. Logo

This logo is an authentic Playboy logo. Any red rabbit head and red fonts on the market are fake

2. Packaging

Casual shoe box

Formal shoe box

3. Anti-counterfeiting mark

Any pair of playboys have anti-counterfeiting labels

4. Authorization label

The national general agent is: Hong Kong Prefa Investment Co., Ltd.

The general distributor of Chinese leather shoes is: Baotu Leather Clothing Co., Ltd.

Each pair of genuine leather shoes will have a regional dealer code stamped on the back of the shoe cover. For example, the code in Guangdong is VA

6. Any A pair of genuine Playboy leather shoes are made of genuine leather, and no non-genuine leather materials such as PU or synthetic leather are used.

Material authenticity:

The quality of shoe materials includes two parts: the upper and the lining. The authenticity of the leather should be identified

Natural leather is genuine leather. There are pores. Generally, when it is difficult to see clearly with the eyes, you can press the leather surface with your thumb to see if there are fine skin lines next to your thumb. There are fine lines, fine lines disappear after letting go, and the surface of the leather shoes is plump and elastic, which is better natural leather. Those with larger and deeper wrinkles are natural leather with poor cortex. If there are no fine lines, most of them are not natural leather, including second-layer shaved leather.

Another notable feature of natural leather is the presence of flaws on the leather surface. Generally, natural leather uppers have some minor flaws on the inside of the shoe and other inconspicuous places, such as uneven skin texture, bright spots, lice, etc. The cross-section of natural leather has three layers with different density: the epidermis layer is very fine and flexible, there is a dense dermis layer in the middle, and below it is a relatively loose fiber layer of the flesh surface, and there is no obvious boundary between the layers.

The lining of leather shoes is a reinforcing material used to prevent extension and deformation and improve the touch of the foot. Shoe lining materials are required to have a delicate touch, breathability, excellent moisture absorption and moisture removal, and non-fading properties. The linings of mid-to-high-end leather shoes are all made of natural leather and cotton. If the upper is made of natural leather, the lining of the shoe is artificial leather, which can only be regarded as a mid-to-low-end shoe. Most consumers ignore the selection and identification of shoe lining materials, which is a mistake.

2. Check the upper sutures and upper bottom adhesive seams to identify the quality of processing

Check whether there are broken threads and whether the upper sutures are neat and standardized. In particular, the joint part of the adhesive leather upper and sole should be bonded smoothly without grooves and ridges, and there should be no empty seams or signs of glue opening.

3. Touch the inner cavity of the shoe with your hands to see if there are any unevenness inside the shoe and on the insole.

Any place that can touch the foot should not be uneven, otherwise the foot will Blister. There must be an insole inside the shoe, which is designed to keep the inside of the shoe clean, cover the uneven nail holes on the insole, and improve the feel of the foot.

4. Pinch the heel of the shoe upper with your hands to see if it is stiff and elastic.

It is required that there should be no groove marks on the stiff heel, and the elasticity below the ankle should be good and should not be too stiff, otherwise the ankle will be damaged. .

5. Press the insole at the waist to see if it is hard.

The insole of the shoe is the torso and skeleton of the shoe. Press the insole hard to make sure it does not move at all. If the skeleton and trunk are not stiff, the shoes will inevitably deform and damage the shape of the feet.

6. Place the shoes flat on the table or glass plate to check whether the shoes are stable.

When the shoes are placed on the table, they should stop shaking immediately.

7. Insert the tip of your middle finger under the front sole to check whether the height of the front hem is appropriate

When the tip of the shoe tip is just enough to reach the thickness of the middle finger, it indicates that the shoe tip is The front stilts are just right. When the front heel of the toe is too large, the stability is reduced; when the front heel is too small, the sole of the shoe wears quickly, the shoe is easily deformed, and the foot is easily fatigued.

8. Hold the shoe with your hand to see if the contact between the sole and the heel is smooth

Put the sole and heel lightly against the side of the table (or counter), with the side of the shoe facing on, look at the contact area of ??the sole. It is better to keep the sole of the shoe (the widest part of the sole) and the entire heel plane in contact with the side of the table. Otherwise, the shoes will be easily deformed and the heels will fall off.

9. Place the shoes flat on the table and check whether they are straight from the front and back.

First, from the toe to the back, look at the distance between the inner and outer edges of the soles and the height of the table. There shouldn't be much difference, so it's better to keep the balance consistent.

Then, from the heel of the shoe to the front, check whether the heel of the shoe is upright and not tilted inward or outward.

10. Use the index finger to stand on the outside of the back of the shallow shoe to check the height of the upper at the outer ankle.

The tip of the index finger points downwards and touches the insole of the shoe, and let the index finger be close to the outer ankle. For the shoe upper, check whether the second knuckle line of the index finger is consistent with the upper height of the outer ankle. For general daily life shoes, social etiquette shoes, and fashion shoes, it is better to be slightly lower than the second knuckle line of the index finger; the upper opening of the back of low-waist xxx shoes and casual shoes is a soft opening structure, and the outer ankle upper can be slightly higher At the line of the second knuckle of the index finger.

11. Look down at the upper of the shoe to check the symmetry of the upper parts and whether the outline of the shoe opening is deformed

Use the straight line between the toe and the midpoint of the heel It is the axis of symmetry. Check whether the parts on the upper are symmetrical. It is better if the inside and outside are symmetrical to each other and do not move forward or backward. The contour line of the shoe mouth should be hugged towards the inside of the shoe. A smooth and rounded shoe is better; a shoe that is twisted into a lotus leaf shape is a poor quality shoe.

12. Understand the performance of the outsoles of shoes and choose suitable outsoles

There are many kinds of outsoles for shoes. According to the main raw materials, they can be divided into rubber soles, imitation leather soles, There are many kinds of plastic soles, and their respective properties are: rubber soles are soft, elastic, non-slip, wear-resistant, heat-resistant and cold-resistant. It's just that the texture is a little heavier.

Imitation leather sole, light, stiff, wear-resistant and resistant to twists and turns. But it is less elastic and less slip-resistant. Plastic soles are wear-resistant and elastic. But the texture is hard and its heat and cold resistance is poor.