Homemade flower watering artifacts can use idle plastic bottles and water pipes. Just drill a hole in the plastic bottle in advance, then put in absorbent wool to let it soak, and then the water will flow down the line. You can also use a water pipe, cut some small holes in the middle, put a bottle at the faucet, insert the pipe into the bottle, and then connect the bottle with the faucet.

Self-made 60-day automatic flower watering artifact

Make a 60-day automatic flower watering device by yourself, and you can avoid the trouble of being away from home for a long time and having no one to take care of the green plants. The easiest way is to find a container that can store more water. Put a water-absorbing rope on the bottle mouth and turn into an automatic watering artifact.

Prepare some plastic bottles, cut off the bottom of the bottles, then turn them upside down, drill some small holes in the bottles with tools and fill them with water, so that the water can penetrate into the soil, or you can bury the bottles half in the soil and leave some outside. Plants can be watered automatically through small holes.

The self-made automatic watering artifact can also cut a small mouth with a water pipe at intervals, and then put it on the plants that need watering, and water it with the help of the height of flowers and plants. To prevent the water supply from stopping, you can put one end of the water pipe into a bottle and then connect the bottle with the faucet.

Prepare a rope with good water absorption of about 30 cm, punch two corresponding holes in the prepared plastic bottle, prepare a straw, cut a small hole in the middle of the straw, connect the wool, and then insert the straw through the small hole of the bottle. Then inject clean water, tilt it slightly, let the wool soak, and the water can flow into the soil along the rope line.