Aolang ceramic tiles are a brand of Foshan Nanhai Luolan Earl Ceramics Co., Ltd. The production base is located in Lianxin Industrial Zone, Xiqiao Town, Nanhai. It covers an area of ??300 acres and has introduced 12 advanced automated production lines. With a production capacity of 180,000 square meters, it is a modern ceramic enterprise integrating the production, research and development, and sales of polished tiles, fully polished glazed tiles, precision tiles, marble, and diamond crystals.

Aolang Ceramics takes the pursuit of zero-defect product quality as its mission and provides users with the best ceramic products. It has established corporate internal control standards that are more stringent than national standards, and has passed ISO9001 quality management system certification. ISO14001 environmental management system certification and China Environmental Labeling Product Certification.

How to choose ceramic tiles?

1. Look at the appearance

First of all, when we choose ceramic tiles, the most intuitive way to distinguish quality is to look at the appearance. The appearance of the ceramic tiles is uniform and complete in color, and the patterns are clear and beautiful. Moreover, the surface is flat and there are no concave places, and the edges are relatively regular. Such ceramic tiles are better. We must pay attention to them when purchasing.

2. Listen to the sound

If you want to choose good quality tiles, you must also learn to identify the sounds made by the tiles. You can use a hard object such as a small hammer to hit the tiles. If the sound is crisp, it means the quality is good. If the sound is dull and muddy, then you should not choose such tiles.

3. Drops of water

If we want the tiles we buy to be more durable, we need to check the water absorption rate of the tiles. We can drop a few drops of water on the back of the tiles. If If the water droplets are absorbed very slowly after being dispersed, it proves that the water permeability rate of the ceramic tiles is not high and the density of the ceramic tiles is tight. You can buy such ceramic tiles. Otherwise, do not buy them.

4. Test the hardness

The hardness of ceramic tiles also determines the quality of the ceramic tiles. The higher the hardness of the ceramic tiles, the longer their service life will be. The detection method is that we can use two tile samples, let the water chestnuts hit each other, and then observe whether there are scratches or powder on the tiles. The hardness of the powder is relatively low, so don't buy this kind.

5. Measure the side length

When buying ceramic tiles, we must bring a ruler to measure the side length of the floor tiles. The higher the accuracy, the better the paving effect will be. , will be more beautiful.