The method to clean the stickers on the new pot is as follows:

Method 1: First tear off the trademark label on the bottom or wall of the pot; apply toothpaste evenly on the label left Wait for a while; wipe with a soft cloth; if there are more stickers, these stickers are strong and cannot be cleaned at one time, apply toothpaste again.

Method 2: Use the hot air of a hair dryer to blow the edge of the trademark for one minute; gently lift the trademark with your fingers, and then slowly tear it apart; if you feel that the resistance is not easy to tear, please use a hair dryer to continue blowing the trademark for a while Open and the mark will be completely removed.

Precautions for using new pots

1. For any stainless steel pot, do not use strong alkaline or strong oxidizing chemicals, such as soda, bleaching powder, sodium hypochlorite, etc. to clean the stainless steel. pot to prevent corrosion of the product. Don't use too much heat.

2. Stainless steel pots are rich in chromium and nickel. These two elements can withstand high temperatures below 400°C without being corroded in non-strongly acidic or non-strongly alkaline environments. However, if they are exposed to acid for a long time, Alkaline foods can also cause chemical reactions, so it is not suitable to hold salt, soy sauce, vegetable soup, or decoct medicine for a long time.