1. First, rub the bottom of the label well to separate the hair from the label, as shown in the figure below.

2. Carefully hold the scissors, aim at the bottom of the label (as far as possible), and cut a small mouth. Don't cut it all, you can't afford to cut it yourself, and it's not easy to tear it if it's too short, as shown in the figure below.

3. Then, brush it off, and finally tear it off one by one, as shown in the figure below.

Extended information

Maintenance of plush toys

1. Keep the room clean and minimize dust, and frequently clean the toy surface with clean, dry and soft tools.

2. Avoid long-term sunlight and keep the toys dry inside and outside.

3. When cleaning, necessary measures can be taken according to the size. For the small ones, the parts that are afraid of wear can be stained with adhesive tape first, and then directly put into the washing machine for soft washing, spin-drying, hanging in the shade to dry thoroughly, and pat the toy intermittently to make its fur and filler fluffy and soft. For large toys, you can find the filling seam, cut the suture, and take out the special filling part (acrylic cotton). You can use tape to touch the parts that are afraid of wear without taking it (to better maintain the appearance). Wash and dry the outer skin, then put the filler into the toy skin, reshape and sew.

4. For wool/cloth or dolls equipped with highly intelligent electronics, machine cores and stereos, the electronic components (some of which are not waterproof) or batteries must be taken out before cleaning to prevent water damage.

5. After the cleaned toys are dried, comb them neatly along the fur direction with a clean comb or similar tools to make their fur smooth and beautiful.

Baidu encyclopedia-plush toys