When tearing the label, it is best to let the adhesive tear off with the label. We can use a hair dryer to blow hot air on the edge of the label for about 1 minute, and then tear it while blowing. This can not only easily tear off the whole label, but also tear it off with the adhesive.

2. Wet towel

Because general offset printing is difficult to remove for a long time. We can soak the offset printing place with a wet towel and then wipe it slowly, but this method is limited to places that are not afraid of moisture and water.

3. Baihua oil or essential oil

If you have Baihua oil or essential balm at home, you can also try this method. Apply Baihua oil or essential balm to the residual viscose, let it stand for 1-2 minutes, and then wipe the viscose with a cloth.

4. Cleaning agent

Detergent can also remove traces of transparent glue. Dip some detergent with a rag and wipe it gently.

5, hand cream

If you have hand cream at home, you can also use hand cream to remove glue. Apply hand cream to the place with adhesive, let it stand for 1-2 minutes, and then wipe it off.

Precautions:

1. It is best to dispose of the glue left after the label is torn off as soon as possible. The sooner you deal with it, the easier it is to deal with it.

2. In fact, before tearing the label, you can bake the label with fire or blow the label with a hair dryer, which can quickly clean up the offset printing.

Phoenix net-this eliminates the traces of scotch tape.