One, who meets one of the following standards, can be identified as controlled tools:
1. Dagger: a single-edged, double-edged or multi-edged sharp knife with a handle, a blade lattice and a blood groove and a blade angle of less than 60 degrees.
2. Triangle scraper: a processing tool with three blades.
3. Spring knife with self-locking device (jumping knife): a folding knife that can be fixed and self-locked by a spring or bolt in the handle after the knife body is unfolded or ejected.
4. Other similar single-edged, double-edged and triple-edged sharp knives: all kinds of single-edged, double-edged and multi-edged knives with the tip angle less than 60 degrees and the blade length exceeding150mm. ..
5. Other single-edged, double-edged and multi-edged tools with an apex angle greater than 60 degrees and a blade length greater than 220 mm (see Figure 5).
Two, all kinds of martial arts, crafts, gifts and other knives with uncut blades and chamfering radius r greater than 2.5 mm do not belong to the category of controlled knives.
Three, Tibetan knives, waist knives, boots knives, shoulder knives and other knives used by ethnic minorities, the scope of control standards shall be formulated by the public security organs of the people's governments of ethnic autonomous regions (autonomous prefectures and autonomous counties) with reference to this standard.
Extended data:
According to Article 3 of the Interim Provisions on the Control of Some Cutters:
Dagger, in addition to the China People's Liberation Army and the people's police as weapons and police equipment, professional hunters and geological, exploration and other field workers must hold it. There must be a certificate issued by the competent unit at or above the county level.
Approved by the public security organs at or above the county level, issued a "dagger wear certificate", shall be allowed to wear. Whoever wears a dagger is no longer engaged in the original occupation, he shall return the dagger to the issuing unit and return the dagger wearing certificate to the original issuing public security organ.
According to Article 4 of the Interim Provisions on the Control of Some Cutters:
The triangular scraper used in processing is only used by workers in the workplace, and it is not allowed to be taken out of the workplace at will.
According to Article 5 of the Interim Provisions on the Control of Some Cutters:
Factories and workshops that manufacture knives within the above-mentioned control scope must be examined and approved by the competent authorities at or above the county level, and approved by the local county and municipal public security bureaus, and the production of special tools can only be carried out after the production license is issued.
Tool samples and their descriptions (name, specification, model, use and output) should be sent to the local county and municipal public security bureau for the record. Products must be engraved with trademarks and numbers (serial numbers or batch numbers).
According to Article 6 of the Interim Provisions on the Control of Some Cutters:
Shops selling knives within the above-mentioned control range must be examined and approved by the competent department at or above the county level and approved by the local county and municipal public security bureaus. Both buyers and sellers shall establish a registration system for inspection by public security organs.
According to Article 7 of the Interim Provisions on the Control of Some Cutters:
Units and individuals who purchase controlled knives within the above-mentioned control scope must abide by the provisions of Articles 3 and 4 on possession and use. The army, police and units at or above the county level shall, with the approval of the higher authorities, order from designated units.
Hunters and field workers specializing in geology and exploration should apply to the local county and municipal public security bureaus (PSBs) for the Purchase Certificate of Special Tools and purchase vouchers. Three-edged scraper, with the unit's letter of introduction to the approved dealer to buy.
According to Article 8 of the Interim Provisions on the Control of Some Cutters:
Units that use knives within the above-mentioned control scope must establish and improve the use and storage system, strengthen the management and inspection of knives, and ensure safety. Individuals who hold the above-mentioned knives shall keep them properly and shall not give them away or lend them to others at will.
Found lost or stolen, should promptly report to the public security department. Where it is lost or stolen due to improper storage, resulting in serious consequences, the responsibility of the relevant personnel and unit leaders should be investigated.
According to Article 297th of the Criminal Law of People's Republic of China (PRC):
The crime of illegally carrying weapons, controlled knives and explosives to participate in assemblies, processions and demonstrations violates the law, and those who carry weapons, controlled knives and explosives to participate in assemblies, processions and demonstrations shall be sentenced to fixed-term imprisonment of not more than three years, criminal detention, public surveillance or deprivation of political rights.
Baidu encyclopedia-control tools