Fire hydrant box 1000*700, thickness 180mm. There are valves, water guns and hose coils.

The long side (length), short side (width) and thickness of fire hydrant box box should meet the requirements of the specification. After the door is closed in place, it should be flush with the surrounding frame surface, and the maximum allowable deviation of unevenness is 2.0 mm. The gap between the door and the frame should be even and straight, and the maximum gap should not exceed 2.5 mm The height of the part of the front of the bolt box protruding from the outer plane of the box door should not be greater than15.0 mm; ; The height of the remaining parts protruding from the surface plane shall not exceed 10.0mm, and the box body shall be made of thin steel plate with a thickness of not less than 1.2mm, or other materials meeting the requirements of Article 5.79 of GB 1456 1-2003. The material of the bolt box door can be determined according to the characteristics of fire fighting engineering and the requirements of indoor building decoration.