The price of a panel furniture engraving machine is generally determined based on the configuration of the engraving machine. The configuration determines the price.

The following will teach you how to choose a high-quality panel furniture engraving machine:

1. Look at the size of the engraving machine format.

Customers should decide based on their business needs and financial status. Receptivity is great. The price of a smaller engraving machine is about the same, but when engraving two-color boards, you need to cut the boards, which is more troublesome and causes unnecessary waste. Large-format engraving machines include 1200mm, 1200mm, 200mm, 1500mm, 1500mm, 2400mm, 2400mm, and the width of engraving machines above 3000mm is more than 1350mm. The sizes of plexiglass and PVC boards on the market are now 1300mm, 2400mm, so these models are more suitable for customers who need large-format engraving machines. Machining spindles are usually divided into two categories: precision machining spindles and high-power cutting off spindles.

2. Pay attention to the spindle motor of the engraving machine.

The spindle motor is an important component of the computer engraving machine. Suitable for processing particularly fine workpieces, the 1 fine machining spindle is characterized by low noise, high speed and height. Such as seals, nameplates, nameplate gifts, etc. This type of motor is usually a high-speed variable frequency motor with small power, generally below 250W.

The disadvantage is that it has poor ability to cut thick materials and is not suitable for cutting thicker materials. The imported pump valve is mainly used for cutting off, high-power engraving, and 2 high-power cutting off the spindle. It is characterized by high power and strong cutting ability. It is especially suitable for cutting Yu and three-dimensional characters. Of course, it can also be used to make nameplates, nameplates, seals, etc. This type of high-power spindle can generally be divided into brushless high-speed AC motors and brushed AC motors according to the characteristics of the motor. The main difference is that

A brushless variable frequency motor has a high speed and a variable speed range of 70060000 rpm/ minutes, while the maximum speed of a general brushed AC motor does not exceed 24,000 rpm:

B brushless variable frequency motor has high rotation accuracy, low wear, low noise, and the operating noise is much lower than that of a brushed AC motor

C brushless variable frequency motors have good stalling characteristics. Since there is a special current limiting circuit on the inverter, the motor will not be burned if it is stalled for a short period of time, whereas a brushed AC motor will burn out when it is overloaded or stalled. It quickly smokes and burns out, and cannot be repaired

D brushless variable frequency motor adopts variable frequency control technology to regulate speed. It is a professional-grade product with a long life. The manufacturer provides a 1-year free replacement. In the future, it can also be replaced by high-speed bearings. Maintenance of the motor is required. Since the brushed AC motor has a battery life of approximately 300 hours, the motor or motor carbon brushes must be replaced, so the carbon brushed AC motor is usually not under warranty for one day.

3. Selection of engraving machine control mode and speed: The control mode can now be divided into three types: the computer is in working state when the engraving machine is working, and all calculations are controlled by the computer. It is impossible to perform other typesetting work, which may result in incorrect computer operation and result in waste products.

This kind of controller can perform typesetting while the engraving machine is working, and is controlled by a single-chip microcomputer. But the computer cannot be turned off. This is actually equivalent to saving 7 computers and reducing waste caused by misoperation of the computer. The system has a memory capacity of more than 32M. As long as the files are saved, C uses the USB port to transfer data. You can immediately completely disconnect from the computer, shut down the computer, or perform other typesetting. This method greatly improves the working efficiency of the engraving machine. Its load capacity and accuracy maintenance ability are more than 30 times that of the circular guide rail. Fourth, pay attention to its guide rail. Large-format engraving machines must use widened imported square guide rails. It ensures the high quality and high speed of the engraving machine. Small-format machine engraving 1mm Chinese characters,

5. The accuracy of the engraving machine. Or a large-format engraving machine can engrave 1.5mm small characters, which can be seen very clearly under a magnifying glass. Double rows and four rows of ball sliders.

Performance characteristics of panel furniture engraving machine:

1. Use imported linear square guide rails. It has large bearing capacity, stable operation, high precision and long life. The imported ball screw has high precision and can cut the knife accurately.

2 The USB interface DSP is completely independent of the computer and can be operated remotely to operate cabinet doors, solid wood doors, craft wooden doors, and paint-free doors. - Woodworking industry: three-dimensional corrugated board processing. Processing of screens and craft windows, auxiliary processing of shoe polishers, game machine cabinets and panels, mahjong tables, computer desks and panel furniture products. It can also engrave copper, iron, aluminum, plastic plates, wooden boards, etc.