Current location - Trademark Inquiry Complete Network - Trademark inquiry - Advantages of laser marking machines
Advantages of laser marking machines

Using laser marking as a processing method, there is no processing force between the workpiece and the workpiece. It has the advantages of no contact, no cutting force, and small thermal influence, ensuring the original accuracy of the workpiece. Laser marking machines use laser beams to mark permanent marks on the surfaces of various materials. The effect of marking is to expose the deep material through the evaporation of the surface material, or to "engrav" traces through the chemical and physical changes of the surface material caused by light energy, or to burn off part of the material through light energy to reveal the required etching. Patterns and text. Laser marking machines use laser beams to mark permanent marks on the surfaces of various materials. Laser marking machines can be divided into CO2 laser marking machines, UV laser marking machines, YAG laser marking machines, and fiber laser marking machines according to different lasers. The computer control system is the control and command center of the entire laser marking machine, and is also the carrier for software installation. The laser marking machine should be used in a dust-free, 10℃-35℃ environment as much as possible, and the optical components should be kept dry and dust-free. Laser marking machines are mainly used in situations that require finer and higher precision. At the same time, it has wide adaptability to materials and can produce very fine marks on the surface of a variety of materials with very good durability.

2. The laser has good spatial control and time control, and has great freedom in the material quality, shape, size and processing environment of the processing object. It is especially suitable for Automated processing and special surface processing. Laser marking machines use laser beams to mark permanent marks on the surfaces of various materials. Laser marking machines can be divided into CO2 laser marking machines, semiconductor laser marking machines, YAG laser marking machines, and fiber laser marking machines according to different lasers. The computer control system is the control and command center of the entire laser marking machine, and is also the carrier for software installation. The laser marking machine should be used in a dust-free, 10℃-35℃ environment as much as possible, and the optical components should be kept dry and dust-free. Laser marking machines are mainly used in situations that require finer and higher precision. And the processing method is flexible, which can not only meet the needs of laboratory-style single design,