What can be used to clean stainless steel tableware

Use potato peels to clean stainless steel kitchenware, it is very clean

How to clean and maintain stainless steel kitchenware

1 , Be careful not to scratch the surface. Do not use rough and sharp materials to scrub the surface of stainless steel, especially mirror-polished ones. Use a softer, non-shedding cloth to scrub. For sanded steel and brushed surfaces, follow the grain. Wipe it off, otherwise it will be easy to scratch the surface.

2. If there is dust on the surface of stainless steel and dirt that is easy to remove, it can be washed with soap and weak detergent. Use alcohol or organic solvent (, benzene) as a binder to scrub.

3. Avoid using washing liquid, steel balls, grinding tools, etc. containing bleaching ingredients and abrasives. In order to avoid residual washing liquid corroding the stainless steel surface, rinse the surface with clean water at the end of washing.

4. If the surface of stainless steel is contaminated by grease, oil, or lubricating oil, wipe it clean with a soft cloth, and then clean it with neutral detergent or ammonia solution or special detergent.

If there are bleach and various acids attached to the surface of stainless steel, rinse it with water immediately, then soak it with ammonia solution or neutral carbonated soda solution, and wash it with neutral detergent or warm water.

5. The rainbow pattern on the surface of stainless steel is caused by excessive use of detergent or oil. It can be washed away with warm water and neutral washing.

6. Rust caused by dirt on the surface of stainless steel can be washed with 10 or abrasive detergent, or with special detergents. As long as we use correct maintenance methods, we can extend the service life of stainless steel and maintain its clean, bright, and gorgeous style

7. Rust spots on stainless steel cookware should be dry-sanded with No. 0 water-scrubbed sandpaper; however, First, determine whether there is rust. If it is just a general burnt soot spot, it should be removed by wiping it with kitchen detergent or scouring powder. You can also soak it in water overnight, then use a small piece of No. 1000 water-sanding paper, and use your fingers to press the burnt area and grind it carefully. Or buy a piece of No. 400 water-sanding paper, soak it in water and gently rub it for a few times to remove it. Do not use too much force to avoid scratching the pot body. Fine scorch marks can be wiped away with a "scouring pad" dipped in detergent powder and a little detergent. What can you use to clean stainless steel lunch boxes?

Wrong method 1: Use dishwashing liquid

Drop the dishwashing liquid on a sponge and apply it to the matte areas. You will find that it does not have much effect. , although dishwashing liquid has strong decontamination ability, it cannot make stainless steel shiny.

2 Use steel wire balls

If you use steel wire balls to wipe, you will get a lot of scratches, which will destroy the protective layer on the surface of stainless steel, and stainless steel will be easily damaged. Corrosion and rust.

Correct method

Tools: dish soap, expired or leftover ketchup, a glass of water, an empty cup, a bottle cap, and a small brush.

Fill up a bottle of dish soap, and then pour the dish soap in the bottle cap into an empty cup.

Pour 2 caps of tomato sauce, and then pour the caps of tomato sauce into the cup with dish soap.

Then scoop 3 bottles of water into the cup.

Stir the measured detergent in the cup evenly, then apply it on the tableware, use a small brush to brush the matte areas, and soak for 10 minutes.

Finally, clean with water

Why can’t ordinary detergents clean it cleanly, but detergent added with ketchup can clean it easily and without any trouble?

Reason: The acetic acid in the tomato sauce will react chemically with the metal, making the stainless steel pot as shiny as new. This method is also applicable to dirty and dark kitchen utensils!

Article source: High-quality life knowledge (ID: gzlshzs), FM93 Traffic Voice (ID: hifm93) What should I use to clean stainless steel?

Use a soft cloth and wash clothes. , and finally wipe it with a clean towel. What can be used to polish stainless steel tableware that has been used for a long time?

Rusty steel pots are easy to stain with black dirt and are difficult to scrub. Now you only need to add water to a larger pot at home and put some Put the pineapple skins in a smaller pot, boil them for twenty minutes, take them out when they are cold, and they will be as bright as new! The blackened scorch on the bottom of the pot can be wiped with rosin water and toothpaste powder, or wiped with a toothbrush or vegetable cloth, which will have good results. 1． Due to the small thermal conductivity of stainless steel, slow heat dissipation at the bottom, and easy concentration of temperature, the firepower should not be too large when using stainless steel cookware. Try to make the heating surface of the bottom wide and even, which can save fuel and prevent the food on the bottom of the pot from burning. 2． If there is food stuck and burnt on the bottom of the pot, soak it in water and then gently scrape it off with bamboo or wood chips. Do not scrape with a kitchen knife or other sharp tools. After cleaning, wipe it dry with a soft cloth and place it in a dry place. 3. Cooking utensils should avoid collision with sharp and hard objects to avoid scratches and cracks that affect the appearance and sealing performance. 4. After the cooking tableware is used for a period of time, a layer of mist will form on the surface of the stainless steel, making the surface of the cooking tableware dark. At this time, you can use a soft cloth dipped in scouring powder or detergent to wipe it to restore the brightness. This method can also be used if the outer surface is blackened by smoke. 5. When using stainless steel pots, do not allow water stains on the bottom of the pot. Especially when used in a briquette stove, because the briquettes contain sulfur, sulfur dioxide and sulfur trioxide will be produced when burned. When it encounters water, it will generate sulfurous acid and sulfuric acid, which will corrode the bottom of the pot. Stainless steel tableware, like other metal tableware, tends to turn black once heated. To avoid this reaction, it is very important to treat the surface of new tableware. Just apply a small amount of grease, such as peanut oil or animal oil, on the surface of the tableware before use. When cooking food, heat it over a slow fire for a period of time until a layer of oil is attached to the surface of the tableware. After the oil is coated with antioxidant film, use it normally according to your needs. If the pot does not burn dry, it will not turn black again. If the stainless steel tableware has turned black and you want to keep it as bright as before, you can use a commercially available "electroplating rust remover and brightener" to remove the rust and brighten it. "Electroplating Rust Remover and Brightening Agent" is safe to use, does not damage the plated surface, and is non-toxic and tasteless. What can be used to clean stainless steel?

When cleaning stainless steel doors, it is not simply wiping and rinsing with detergent. It depends on the dirt on the surface. Different dirt should be treated with different cleaning methods!

Method 1: If there is only dirt attached to the surface of the door, wipe it with soapy water.

Method 2: If you want to remove the traces of trademarks or film tape on the door, you can wipe it with warm water and then scrub it with alcohol.

Method three: If there is dirt such as oil stains on the surface, you can scrub it directly with a soft cloth and then clean it with ammonia solution.

Method 4: If there is bleach and various acids on the surface of the stainless steel door, rinse it with water immediately, then clean it with neutral carbonated soda water, and then rinse it with clean water.

Method 5: If there are rainbow patterns on the door surface, it may be caused by using too much oil or detergent. Clean it with warm water.

Method six: If there is rust on the surface, you can use 10% nitric acid to clean it, or you can use a special maintenance solution.

Method 7: If there are stubborn stains on the surface, you can use the pedicle of a radish or cucumber dipped in detergent and wipe it vigorously

Note on the above: Never use steel wool, as it will Causes significant damage to doors.

How to clean stainless steel?

Wipe with a cloth dipped in vinegar.

Vinegar is acidic and can clean dirt on the surface of stainless steel. It is actually the "pickling" principle in the production of stainless steel. Of course, strong acid is used in production. What kind of welding machine is used for thin stainless steel tableware?

I can test weld the medium frequency welding machine for you. Can you send the workpiece? What should I use to clean the stainless steel stains?

It depends on what kind of material the stain is. If it is oil stains or wax Traces, paint, etc. can be removed with volatile liquids such as alcohol, gasoline, Tianna water, white oil, etc. If it is oxidation traces (rust), it needs to be removed with dilute sulfuric acid. How to wipe stainless steel clean

The fastest, most labor-saving way without damaging the surface of stainless steel is to use a wet coarse cloth with some edible alkali to wipe the rusty parts. Remember to wear gloves, because it may hurt your hands a little. . Or use something alkaline or acidic. The toothpaste mentioned above, orange peel and the like can be used, but they need to be wiped for a long time.