Go to the next software called unlocking software GetMaster~

/Tools/PC/GetMaster.rar

Here is the tutorial:

I would like to apologize to Siemens customer service with this article!

But,

This is not my fault...

A brief tutorial on unlocking software GetMaster

Herrliu

Need to prepare:

-Your phone’s serial number IMEI

-FSN/ESN/Phoneid

-EEPROM’s 5121 block

Method (taking C6C v43 as an example):

-IMEI: View on mobile phone (press *#06#), or use simoco (press "mobile phone...")

< p>-ESN: Open the GetCode.log generated by the screenshot software, which contains; or use Smelter to calculate the PhoneID of the Fullflash of your mobile phone; or use x65PapuaUtils to calculate it.

-EEPROM 5121 block: Use smelter to open Fullflash on your phone, press the "E" button, right-click Block 5121, and select "Save block in file" to generate xxx_5121.bin.

Note:

If you get an 8-digit PhoneID, just use two digits as a group in reverse order, which is the ESN. For example: PhoneID=12345678, then the ESN is :78563412

Both IMEI and ENS can be obtained from the record file GetCode.log of the screenshot software ShootX65 after successful connection.

Specific steps:

Run the unlocking software GetMaster.exe, enter the IMEI and ESN, and leave the EEP5121 field blank.

Press "Select 5121", select xxx_5121.bin above, and press Do it. The program starts calculating.

A 2.66G computer takes about 10 minutes to calculate. My P3 1G machine takes half an hour. Some people use it for 1 minute.

The calculated unlock code result:

*#0000*00000000# - network lock

*#0001*00000000# - service provider lock

*#0002*00000000# - unknown

*#0004*00000000# - network subset lock

*#0005*00000000# - only sim

< p>*#0003*85960586# - phone code

The *#0003*85960586# (the last 8 digits are different for each phone) is the universal unlock code for your phone lock. You can use Verify as follows:

In the "Security Settings" of your phone, do not select the "Reject other SIM cards" item. Shut down the phone, remove the card, and turn it on. When prompted to insert the SIM card, enter the unlock code above. It will prompt: "Mobile phone password has been cleared."

Applicable to 65 mobile phones, but not SX1.

Smelter will integrate dedicated calculation tools in the next version to simplify the above unlocking process.

This unlocking code should be the phonecode unlocking code that the customer service sent to Shanghai Siemens via text message. A fee of 30 yuan will be charged for each unlocking!

[Indicate the source and feel free to reprint]