Cleaning method of soft-shell jacket Cleaning method of whole jacket Dissolve neutral detergent in cold water, soak the dry jacket for 20-30 minutes, and then gently rub it with your hands. Where the neckline and cuffs are heavily stained, you can first pretreat them with a solution such as collar net, and then gently brush them with a soft brush after soaking.
After cleaning, do not dehydrate with a dryer, otherwise it will be fatal to GTX membrane, and hang it in the shade to dry. Remember not to use alkaline cleaning products such as washing powder and soap. It is best to use a neutral cleaning solution. If it is difficult to judge the nature of the solution, you can use bath lotion or shampoo instead.
Maintenance methods of soft-shell jackets Method 1: The fabrics of jackets and soft-shell jackets are functional fabrics, which are often compounded or bonded, and generally have two layers of bonding and three layers of bonding. No matter how many layers are pasted, excessive tearing or strong water pressure of the washing machine may lead to the separation of the base fabric, which will cause irreversible damage to the fabric. In addition, the jacket and soft shell jacket can be waterproof all over, because the splicing position of the car has been hot-pressed waterproof. The strong water pressure of the washing machine will also destroy the waterproof technology here.
Method 2: The soft shell jacket is also waterproof. If there is some small dirt, you can wipe it with a towel dipped in soapy water. Soft-shell jackets usually take a long time to wash. The bottom of the dirty cloth of the soft shell coat is made of chemical fiber, and it is easy to remove stains. Soak in neutral laundry detergent for about 20 minutes, and wipe the dirty place with a sponge (it is not recommended to use a soft shell brush to avoid roughening the surface fibers).
Please pay attention to 1 when buying soft shell jackets. Every soft-shell jacket should be completely waterproof. Hot-pressed rubber strip must be used at all seams to prevent water leakage in the eye of the needle. Look carefully at the inside of the clothes to see if rubber strip is flat and blistered. This is very important for the waterproof performance of clothing.
2. At present, many charge suits add a little glue to the joint of two or more rubber strips to prevent the rubber strip head from warping after being used for a long time. This process is mostly used for high-grade three-layer rubber underwear.
3. The main zipper of the Emergency Unit is either waterproof zipper or the front flap to prevent rainwater from infiltrating. If it is an ordinary zipper with a placket, pay attention to whether there is a back hem at the placket. This design allows rain to flow down the back hem without penetrating into the zipper.
4. Whether the hat can shield the wind and rain well and whether the head can move freely after wearing it. If it is used for ice climbing, snow mountain and other activities, we should also consider the activities after wearing a helmet.
5. Whether the tightening method of the cuff of the soft shell jacket is appropriate is related to the activity of wearing thick gloves in rainy and snowy weather.
6. Is there a windbreak skirt at the hem or waist of the soft shell coat? If there is no windbreak skirt, is there a rope to tighten the clothes to prevent Melissa Zhou from pouring into the body from the hem in bad environment?