Yes

Usage method: (spraying method)

1. First spray the light-colored paint (non-metallic paint) as a primer, and wait for the light-colored paint to be primed After drying, spray the luminous topcoat. If you are working on a cement surface, it is recommended to spray two layers of light-colored primer for better results.

2. It is recommended to use W-71 spray gun (nozzle ￠1.50 mm). The spray gun pressure for primer is about 2.0Kg/cm2, and the spray gun pressure for topcoat is about 3.0kg/cm2.

3. During construction, the spray gun and the surface need to be kept 18cm, the spray gun angle is 45°, and the spray paint film layer should be evenly thin to obtain the best effect. For unknown substrates, a small area test must be conducted in advance to confirm.

4. Do not construct in bad weather such as rain, fog, snow, etc., as it will affect the fastness.