First, how to stick tiles on the wall
1, carefully check whether the basic treatment meets the requirements of tile laying before construction.
The first thing we need to see is whether the original wall is suitable for tiling, such as whether there are hollows and cracks in the wall, and whether the waterproof and roughening treatment of the wall is qualified. If there are these problems, it is necessary to carry out rectification before laying bricks (both vitrified bricks and porcelain bricks need to pay attention to this).
2. The wall must be brushed.
The main function of wall surface roughening is to increase the contact area between wall surface and ceramic tile. When laying ceramic tile with cement mortar, the wall surface must be roughened. Special reminder: After the wall surface roughening is completed, the roughening quality must be checked (no cracking, delamination, burr-like protrusion and curing strength meet the requirements), and the tiles can be laid only after the roughening layer is dry and solid.
3, choose qualified cement sand and pay attention to the ratio.
In the process of home decoration, 32.5MP ordinary portland cement is generally used as the cement for floor tiles, and Zhonghe sand is used as the sand. When the floor tile is used for wall brick paving, the mixing ratio of cement and sand is 1: 2 (higher than the mixing ratio of 1: 3 in the cement mortar used for wall brick paving).
4. Fix the bottom tile to prevent the tile from falling.
When the tiles are laid, when the glazed tiles are laid on the wall, the elevation of the tiles should be determined, and the glazed tiles should be fixed with wood squares to prevent the newly laid tiles from falling.
5, before the shop is stuck, metope must water wet metope.
This project is also very easy to be ignored by the construction party. If the wall is too dry to be wetted with water, the original drywall will easily absorb the moisture in the cement mortar, which will lead to the reduction of the setting efficiency of the cement mortar and the delamination of the ceramic tile and the cement mortar. At the same time, the solidification shrinkage expansion rate of cement mortar quickly absorbed by the wall is inconsistent with the shrinkage expansion rate of the brush layer and leveling layer of the wall, which will also lead to the delamination of cement mortar and the wall base. Simply put, there will be two delaminations, one between brick and cement mortar, and the other between cement mortar and the original wall foundation.
6, the cement mortar on the back of the brick must be full and uniform.
When using cement mortar as binder to lay tiles, in order to avoid hollowing, the cement mortar on the back of tiles should be full and uniform.
7, each space layer by layer and turn to the upper berth, to prevent the tiles from falling.
When paving, it is suggested that the whole space should be paved layer by layer instead of one wall at a time. The main purpose of laying one wall at a time is to avoid short setting time of cement mortar and tile falling off. If the tiles are laid in circles, the setting time will be more sufficient and the tiles will be easier to fix.
8. Protect finished products before, during and after tile laying.
When laying tiles, it is necessary to protect the finished products of doors and windows and other related items to avoid damage, and at the same time, it is necessary to clean up the cement mortar overflowing from the joints of tiles in time to avoid the mortar polluting the surface of tiles.
9, ceramic tile is not dry solid should not rush to tick off seam processing.
If the tiles are not dried and fixed, they will be pointed immediately, which will artificially cause the tiles to be loose and uneven.
10, paving acceptance, follow-up installation after no problem.
After the completion of tile paving, it is necessary to check the quality of tile paving on the wall and whether there are any construction problems such as hollowing. If there are hidden dangers such as empty drum, it is necessary to carry out rectification first, and then carry out kitchen and bathroom installation. In the installation process, if it involves punching holes in the wall, you should pay more attention. At the same time, when punching a hole with an impact drill, water should be sprayed at the punched part to prevent the ceramic tile from cracking due to sudden temperature change (you can drill a hole in the lid of the beverage bottle with a nail and fill it with water, squeeze the bottle when punching, and fill the punched part with water).
Second, high-quality porcelain brand recommendation
1, Nobel Nobel
Headquartered in Hangzhou, it started from 1992. It is the leader of high-grade ceramic tiles in China and one of the top ten brands of ceramic tiles. It belongs to the products of Nobel Group Co., Ltd., China environmental label products and foreign high-tech enterprise products.
2. Kyle Polo is in polo, Kyle.
Headquartered in Guangdong, 1996 started, which is a well-known brand of building ceramics in the eastern province. It belongs to the products of Kelpolo Ceramics Co., Ltd. and has the reputation of supreme antique brick.
3. Guanzhu
Guanzhu Guanzhu, a famous trademark in Guangdong Province, is a competitive brand in building ceramics industry, a brand of New Pearl Ceramics Company, and one of the high-tech enterprises specializing in producing ceramics and bathroom products.
4. Dong Peng tiles
Dong Peng tile was founded in 1972, which is a famous brand in Guangdong province. As an iconic brand of China ceramic industry, an industry standard drafting unit and a professional manufacturer of large-scale ceramic products, Dong Peng ceramics are deeply loved by consumers, especially in the ceramic product systems such as vitrified bricks/glazed tiles.
How do the tiles stick to the wall? If you want to stick tiles on the wall, it is often better to find a professional master to finish them. If you don't find a professional master to finish it, it's easy to hurt the tiles. High-quality porcelain brands are recommended as above. When you don't know what kind of porcelain to buy, you must make more choices to ensure that the porcelain you buy meets your own needs.