For most table tennis players, the utilization rate of internal energy rubber covers is higher, so what is internal energy rubber covers? I'd like to give you some information about the inner rubber sleeve in table tennis, hoping to help you.
Brief introduction of internal rubber covering in table tennis
Internal rubber covering in table tennis, such as Daunic F1, as its name implies, contains energy inside, which is mainly a new rubber covering production process that the rubber and sponge are stretched to a certain extent, and then bonded after the sponge and rubber are stretched and expanded. Its design concept is to minimize the energy loss in the process of hitting the ball, so as to create a full arc to increase the second speed of the arc and fully release the forward momentum of the arc.
The characteristics of internal rubber covering in table tennis
What is the quick rubber effect? A new type of rubber coating, namely? Internal energy rubber? Has been developed, and it can also have the traditional rubber cover without pouring rubber? Glue pouring? * * * after sex?
elasticity enhancement
In the traditional rubber cover, the rubber and sponge are bonded in a natural state, and the elastic loss is easy to occur between the bonding layers, but the designer has improved it. Internal energy rubber? Due to its bonding process and some molecular structures, it is always in a state of high tension, which is similar to the high elastic effect produced by stretching and tightening the traditional rubber cover after applying fast glue. It can be said that under the premise of not pouring glue, Internal energy rubber? The speed is generally higher than that of traditional rubber covering.
metallic sound
traditional rubber covering? Glue pouring? Later, when hitting the ball, it can make a pleasant metallic sound, which is not only one of the external appearances of high elasticity, but also makes the user excited by hearing? Stimulants? . Almost all? Internal energy rubber? They all flaunt their hitting sound in propaganda, and this sound is derived from their natural high tension.
Consumability
is also due to this high tension. Internal energy rubber? It further enlarges the consumable property of rubber cover. If the traditional rubber coating is repeated? Glue pouring? , its service life will be seriously shortened, and? Internal energy rubber? The rubber surface is naturally highly brittle and easy to break after being bumped (some products are specially equipped with protective film which is rare in Japan and Germany when leaving the factory), so consumers must have corresponding economic conditions before they can use it for a long time.
the development history of internal rubber in table tennis
? Internal energy rubber? Born at the end of the last century, it has produced many members, but in fact, most brands in the world are OEM by a few professional manufacturers, tracing back to the source, but there are only three representative lineages? TENSOR of german ESN, High Tension of Japanese and Tension of China.
what is the ESN factory in Germany? Built-in fast glue effect? Inventors, they developed the earliest? Internal energy rubber? That is, the Tango of Euler and the Revolution of Shore opened Pandora's box. Then, the Daunic DESTO F series and the tall and straight D.TecS series were born. The sponges of this generation of products are softer, so the absolute ball delivery speed is not as good as that of the previous generation, but the adjustment room left for users is correspondingly increased, which not only makes it possible to eat the ball deeply, attack and control freely, but also makes it possible to get a faster relative ball delivery speed (that is, the second speed), so it has been widely recognized worldwide. Nittaku, a Japanese brand, got wind of it, directly placed an order with German ESN, and launched the Moristo series using TENSOR technology, which was also a great success.
Japanese manufacturers who have been leading the world in professional rubber manufacturing for many years, faced with the TENSOR trend, Butterfly Company immediately set out to launch the first Japanese-made product in a very short time. Internal energy rubber? That is Bryce, and named his technology High Tension. However, it is slightly different from TENSOR's main focus on rubber bonding and sponge. High Tension chose rubber itself as a breakthrough. Subsequently, other Japanese brands TSP, JULIKE and DAKE also launched their own similar products one after another, but they basically belong to the same line as High Tension, and the so-called Mega Tension technology was also applied to the Stika rubber sleeve made in Japan.
in just a few years? Internal energy rubber? There have been many changes. For example, the early products naturally curled badly, which affected the stickup to a certain extent. With the passage of time, the curling degree of new products became smaller and smaller, and the appearance of new products was nearly flat at present.
the rubber sheets of the initial products were all normal thickness, but there was once an ultra-thin rubber sheet with an ultra-thick sponge in the middle. Variation? Variety? Daunic's Supersonic series, tall and straight MAKSS, etc., some people describe it as? Thin-skinned stuffing? , although they are not clearly marked? Internal energy type? However, they are closely related to TENSOR. They all claim that their extremely thin rubber helps to improve the keenness of touching the ball, and the extremely thick sponge helps to soften the hand and increase the time of holding the ball. Especially, the first two claim to have the speed and elasticity like glue filling, and remind people. Because the sponge is very thick, it takes more glue and more time to pour glue. ? However, because the 2.6mm sponge is too thick, it is a little difficult to eat the ball, and the ultra-thin rubber is not easy to adapt quickly, so the market response of this kind of products is dull.
in addition, TENSOR was originally made for attacking anti-glue, but with the vigorous operation of various brands, internal energy technology is not only used for comprehensive and defensive anti-glue, but also grafted into positive glue, raw glue and even long glue, providing consumers with more choices.
it must be admitted that China equipment manufacturers are interested in? Internal energy rubber? The research and development started very late, and this kind of product was in full swing in foreign countries before and after 22, which was first put forward by David? Tension rubber? The concept, and the serialization and diversification of local internal energy rubber, until this year by hand? Tension? Aibo Sports, the trademark right in China, started. At the beginning of this year, Aibo developed an internal energy rubber cover close to the German TENSOR by using the self-developed bonding technology to fit the imported Japanese-German sponge and domestic rubber cover. Blast Bombard? And? Veyron Violent? However, while obtaining similar properties, it also has some problems such as severe curling and easy wear. In order to solve the above-mentioned fly in the ointment, Aibo increased its research and development efforts, and quickly upgraded the domestic second-generation internal energy rubber magic Mopha J. Tension, which is close to the second-generation TENSOR, taking Bryce of Butterfly and Torpedo as reference. (Japanese sponge) and? Magic Mopha G. Tension? (German sponge). At the same time, Aibo took the lead in launching the internal energy positive glue in the domestic market? Hummer HAMMER? Internal energy type raw rubber? Kunpeng KingRoc? And internal energy type long glue? Talent Sirius? . Unfortunately, TENSOR abroad has entered the 3G (third generation) era? The Revolution C.O.R has been launched by Kandu, but other major table tennis professional equipment manufacturers in China have not yet joined this camp.
precautions for rubber sleeve in table tennis
? Internal energy rubber? This is designed to save the trouble of glue filling, but the power of habit is powerful. Although the concept of internal energy has attracted a lot of attention, there are still many people who need glue filling to get psychological satisfaction. Therefore, many brands have introduced suitable glue filling with softer sponges? Internal energy rubber? . Both? Built-in fast glue effect? , and need to glue.