What industry does carton packaging belong to?
Paper products industry
What processing industry does the carton factory belong to?
The carton factory is a small manufacturing industry . It is not a processing industry. In the processing industry, the necessary materials are provided by customers, and you only do molding processing.
What industry category does the carton factory belong to as an equipment operator?
Packaging and printing
What should be the business scope of carton production and sales in the business license
The business scope on the business license is applied by the applicant according to the business direction and is reviewed and determined by the industrial and commercial authorities.
The business scope of a business license is determined according to the "National Economic Industry Classification". The national standard "Classification of National Economic Industries" was first released in 1984, revised in 1994 and 2002, and revised for the third time in 2011. This standard (GB/T 4754-2011) was drafted by the National Bureau of Statistics, approved and released by the State Administration of Quality Supervision, Inspection and Quarantine and the National Standardization Administration Committee, and will be implemented on November 1, 2011. In addition to referring to the revised fourth edition of the International Standard Industrial Classification (referred to as ISIC4) newly revised by the United Nations in 2008, this revision is mainly based on my country's economic development status and trends in recent years, and makes classifications of categories, major categories, medium categories, and small categories. adjustments and modifications.
The new national standard "National Economic Industry Classification" (GB/T4754-2011) was approved and released by the General Administration of Quality Supervision, Inspection and Quarantine and the National Standardization Administration Committee, and will be implemented on November 1, 2011. According to the actual situation of statistical work, it will be used from the unified reporting in 2012.
Principles and regulations
Principles of industry division
This standard uses the principle of homogeneity of economic activities to divide national economic industries. That is, each industry category is divided according to the nature of the same economic activity, rather than according to establishment, accounting system or department management.
Basic units of industry classification
According to the United Nations' "International Standard Industrial Classification of All Economic Activities" (ISIC Rev. 4), this standard mainly divides industrial activity units and legal entities Industry unit. The use of industrial activity units to classify industries is suitable for production statistics and other statistical surveys that do not target assets, liabilities, and financial status; the use of legal entities to classify industries is suitable for statistical surveys that target assets, liabilities, and financial status.
When classifying industries by legal entities, each legal entity in a conglomerate enterprise such as an enterprise group or a group company composed of multiple legal persons should be distinguished, and the industry should be divided by a single legal entity.
Principles for determining the industry affiliation of a unit
This standard determines the industry nature of the unit based on its main economic activities. When a unit is engaged in one economic activity, the unit's industry is determined based on that economic activity; when a unit is engaged in two or more economic activities, the unit's industry is determined based on the main activity.
Is the carton factory considered a polluting industry?
It definitely counts!
It will happen that a carton factory is a corrugated cardboard manufacturer. Its production process is mainly: paper heating - tile making - tile gluing - cardboard cutting - printing. During the production process, it mainly produces The wastewater process is the tile paste and printing process, and the wastewater generated is mainly glue wastewater and ink wastewater.
A large amount of starch adhesive is used in the gluing process of corrugated base paper and container board (or kraft paper). Since the starch adhesive has a certain viscosity and is easily contaminated by bacteria, mold, scale, and dust in a high-temperature, high-humidity working environment, cleaning equipment is provided in the feeding and returning systems of the corrugating machine. device. Therefore, during the flushing process of corrugated paper production equipment, a large amount of starch adhesive enters the water, causing the COD and BOD concentrations in the wastewater to be high.
Flexographic water-based ink, also called liquid ink, is mainly made of water-soluble resin, organic pigments, solvents and related additives through compound grinding.
Among them, organic pigments used for coloring usually use insoluble azo, fused ring ketone and phthalocyanine pigments. Most of these pigments contain azo groups, carboimino groups and other chromophores containing double bonds in their molecular structures. They generally have Good dispersion, media affinity, bright color, low viscosity and other characteristics. Due to the cleaning of equipment, a certain amount of wastewater will be generated. The ever-changing colors of water-based ink cause the chemical composition of the wastewater to be quite complex. It has the characteristics of high COD, high chroma, and difficulty in biodegradation. Once it enters the water body, it will have serious consequences for the water environment. of pollution. The wastewater treatment process is closely related to the type and characteristics of water-based ink. The current research and application of water-based ink wastewater treatment mainly focuses on chemical coagulation, electrolysis, coagulation air flotation, coagulation air flotation-microelectrolysis, chemical oxidation-coagulation and other pretreatment methods combined with biochemical processes.
In fact, pollution can also affect your health. Let’s talk about cartons first. The toxic components of cartons are mainly ink. Ink contains organic solvents and heavy metal elements that can cause damage to the human body.
Let’s talk about glue. , in fact, many non-toxic glues mentioned in the market are not completely accurate, especially the glue used in factories, which is mostly to reduce costs. Such glue is not flattering, but if it is good glue, it will be fine
What are the raw materials of the carton factory?
A carton factory is a factory that produces cartons. The raw material for making cartons is of course pulp. There are many materials that can be used to make paper pulp. For example: straw, wood, waste paper, wheat straw, etc. can be used as raw materials for pulp. After beating these materials into pulp, they are made into paper and then glued into cartons. This completes the entire procedure.
Which category does the safety production standardization of carton factories belong to?
It belongs to the industry and trade industry category and is implemented in accordance with the assessment standards for safety production standardization of papermaking enterprises.
Industry and trade scope: metallurgy, nonferrous metals, building materials, machinery, light industry, textiles, tobacco, commerce, ironmaking, steelmaking, metallurgical gas, nonferrous metal rolling processing, alumina, electrolytic aluminum, Non-ferrous heavy metal smelting, cement, flat glass, building and sanitary ceramics, machinery manufacturing, papermaking, furniture, liquor, beer, dairy products, food, textiles, tobacco, commerce, modern logistics and trade.
How is the carton industry now? Open a small carton factory
To open a small yellow board carton factory, it is best to have a certain business before starting to purchase machinery and rent factory buildings.
In unfamiliar areas, you should listen to the opinions of experienced people.
Cartons are supporting products for consumer products. It can be said that as long as people have consumption and companies have products, there will be no shortage of product packaging.
In terms of packaging materials, carton packaging accounts for a large part of the weight.
Therefore, the carton factory still has a very optimistic future.
It’s best to have your own business. If you don’t, it’s like fighting a battle without confidence.
But if your personal business ability is relatively good, you can also publicize it to other manufacturers.
After all, it is impossible for all relatives and friends to need cardboard boxes. Without "connections", we can still grow bigger and stronger.
Carton factories are different from general companies that produce products.
General companies want to face direct consumers and need their own sales network, sales personnel, and sales methods...
p>
The carton factory only needs to find the right manufacturer and use its methods to win the business.
Perhaps, a food factory, electrical appliance factory, furniture factory, toy factory... you walk into can become your customer.
When you have a business, you also need to choose your own factory.
Cartons are flammable and afraid of water. These are the disadvantages of cartons. If they are handled properly, there will be no problem.
It is best to avoid low-lying, rainy and watery areas when choosing a site. Do not stack cardboard directly on the ground. Brackets are a good choice.
Smoking and open flames are prohibited in the factory area, and fire-fighting equipment is equipped to ensure production safety as much as possible.
The initial size of the factory is preferably 500 square meters or larger, but smaller is also acceptable.
Some of our customers renovate their houses in rural areas for production. Of course, these are only a few.
It is best to locate the factory in or near an industrial park, which facilitates business expansion and reduces transportation costs.
We already have business and factory buildings, but what is missing is machinery.
Faced with manufacturers and salesmen from all over the world who are selling their products to you, how should you choose?
What configuration is best for you.
This still needs someone with experience to tell you.
The two most basic machines needed by the yellow board carton factory are the ink printing slotting machine and the carton nailing machine.
The former is production equipment, and the latter is molding equipment.
Let’s first introduce the printing equipment:
The ink printing and slotting machine is the most basic production equipment, responsible for printing and basic processing.
It is divided into manual ink printing and grooving machines, semi-automatic ink printing and grooving machines, and fully automatic ink printing and grooving machines.
The price also varies with the configuration. Manual is the cheapest, semi-automatic is slightly more expensive, and those that can use full automation are not limited to small carton factories.
Most investors choose semi-automatic ones, while some also use manual ones.
The main difference between semi-automatic and manual machines is the adjustment size.
Semi-automatic is more time-saving, while manual is more troublesome.
General manufacturers make several varieties a day, or even more, and rarely only make one or two varieties.
Adjusting the knife, attaching the plate, and adjusting the size are more labor-intensive.
Generally, it takes about twenty minutes to half an hour to adjust the production size using semi-automatic methods. Manual knife adjustment requires The steps will take a little longer.
The normal production speeds are actually similar, but during the production process, semi-automatic machines can adjust the phase without stopping, while manual machines must stop for adjustment.
In a normal working day of eight hours, the quantity of products produced varies greatly.
The most important improvement of the fully automatic ink printing machine is to change the manual paper feeding to mechanical paper feeding.
The production speed is greatly improved, and it is no longer the same concept as manual paper feeding.
After printing and slotting, the carton needs to be shaped.
Generally divided into two forming methods, one is to use a carton nailing machine, and the other is to use a carton gluing machine.
Various cartons are available depending on customer requirements.
Carton nailing machines are relatively cheap. Generally, carton factories will purchase one or two machines in the initial stage, and the later stages will depend on the situation.
If the quantity is large, you can consider a semi-automatic carton nailing machine.
Box gluing can be applied manually and glued manually; you can also buy a box gluing machine, which is convenient and practical.
The box gluing machine is several times more expensive than the box nailing machine, but the consumables are cheaper.
The actual situation still depends on the business needs to choose which molding equipment to purchase.
With the above two machines, the carton factory can produce normally.
However, other machines may need to be added to meet other customer needs.
Such as die-cutting machines, paper dividing and creasing machines, thin knife machines, three-purpose machines, etc.
The following is a brief introduction to the functions of the machine.
Die-cutting machine: a necessary equipment for the production of special-shaped cartons and color printing.
Paper dividing and creasing machine: Modified cardboard, slitting cardboard, and can process relatively small pieces of paper.
Thin knife machine: modified cardboard, slitting cardboard, not suitable for too small pieces of paper, but the paper separation effect is better than that of the paper crimping machine.
Three-purpose machine: also called slotting machine, used for processing small cartons.
...
There are other auxiliary equipment...
In which categories does a carton packaging factory need to register its trademark?
Judging from your business scope, it is mainly a manufacturing enterprise that produces boxes, Class 16 cartons, 1609. This must be applied for. Otherwise, you won’t be able to put your LOGO on the boxes you produce.
If you want to sell the following 35 categories to others but not yourself, you don’t need to apply for 3503. 37, 42, 40, these individuals feel that it is not a big problem if they don’t apply. If you want to open a Taobao or something in the future, then apply for 3503. Hope that helps. Contact us again.
How is the current situation of the carton factory industry?
I don’t know in southern Anhui. It’s not easy to do business in Guangdong. The profits of the carton industry are not high. If you focus on volume, the key to making cartons is Earn money by production volume, and buy materials with cash. If your company has a good reputation, it will be settled monthly at most. However, the products you send out will require at least monthly settlement. If it is more, it will be settled monthly for 90 days. During these 90 days, you will buy materials for the goods you produce. It all costs money. The conclusion is: the carton equipment does not cost much. The biggest investment is to buy materials. The more you do, the greater the investment. You need materials that can last for 4 months. After 4 months, it will slowly It's better. In addition, cartons are in the packaging and processing industry. If you don't have customers in advance, don't invest blindly. After many years in this industry, I feel more and more that the future is bleak