There are several ways to deal with the uneven surface of the trademark when epoxy resin glue drips:

1. Use sandpaper to polish: First, choose appropriate sandpaper. It is generally recommended to use 2000 mesh. fine sandpaper above. Then, soak the sandpaper in water to keep it moist. Next, lightly sand the surface of the glue drop with wet sandpaper, taking care to sand evenly to avoid damage from over-sanding. Finally, wipe it clean with a clean cloth.

2. Use a heat gun for baking: Adjust the heat gun to the appropriate temperature, generally recommended to be between 60-80 degrees Celsius. Then, aim the hot air gun at the surface of the glue drop, maintaining an appropriate distance, and blow the hot glue drop with hot air to soften it. Next, use a cotton swab or other tool to gently wipe the glue droplets until the surface becomes smooth. Finally, wipe it clean with a clean cloth.

3. Use solvent cleaning: Choose a suitable solvent, such as alcohol, acetone, etc. Then, pour the solvent onto a clean cloth and gently wipe the surface of the glue drop with the cloth until the glue dissolves or softens. Next, use a cotton swab or other tool to gently wipe the glue droplets until the surface becomes smooth. Finally, wipe it clean with a clean cloth.

4. Use special cleaners: There are some cleaners on the market that are specially designed to clean glue, which you can choose to use. Follow the detergent instructions, apply the detergent to the surface of the glue drop, and then gently wipe it with a cotton swab or other tool until the surface becomes smooth. Finally, wipe it clean with a clean cloth.

It should be noted that when handling glue drops, attention should be paid to protecting other parts of the trademark to avoid unnecessary damage. In addition, different treatment methods are suitable for different types of glue and trademark materials. It is recommended to test before treatment to ensure that no damage will be caused to the trademark.