Midea’s commercial water dispenser is a high-performance, safe and healthy water dispenser. However, various faults will inevitably occur during daily use. These faults may cause the equipment to fail to function normally and bring us problems. A lot of inconvenience. Below are some common Midea commercial water dispenser failures and their solutions.

1. Power failure.

Power failure is one of the common failures of Midea commercial water dispensers. If there is a problem with the power supply, the device will often fail to start. The solution is to check whether the power plug is plugged in tightly and whether the power is turned on. If everything is normal, you can try to replace the power plug or replace the device.

2. Water pump failure.

A water pump failure will cause the equipment to be unable to supply water normally, causing inconvenience. If you find that the water pump is faulty, you can try to clean or replace the water pump.

3. The temperature is abnormal.

If you find that the temperature of the water dispenser is abnormal, it may be due to a faulty radiator. This problem can be fixed by cleaning the radiator or replacing it.

4. The water quality is abnormal.

If you find that the quality of your drinking water is abnormal, it may be due to a malfunction or contamination of the filtration system. You can replace the filter or perform a water quality test to identify problems and resolve them.

When using Midea commercial water dispensers, they should be maintained and cleaned regularly to avoid failure caused by accumulation of impurities and dirt. At the same time, if the equipment fails, you should contact after-sales customer service for repairs in time to avoid further losses and inconvenience.