Question 1: How to remove glue marks from plastic. Philips oil is generally sold in stationery stores... If it is newly printed... just rub it with a cloth soaked in hot water...

p>

Question 2: How to remove the adhesive stuck on the plastic shell? How to remove the adhesive stuck on the plastic shell:

1. Apply facial oil, spread it evenly, use your fingernails to pick it off, and then wipe it off with a wet towel.

2. Use a hair dryer to heat the glue and you can remove it.

3. Just rub it with the essential oil and it will fall off after a while. Give it a try. 4. You can try using an eraser. But at the beginning, you may feel that the more you wipe, the dirtier it becomes. But if you wipe for a longer time, you will see the effect. This method is relatively tiring, so you need perseverance.

5. Soak it in water, add a little detergent, and then brush it with an old toothbrush.

6. You can also wipe it with a cloth dipped in alcohol or Erguotou.

7. Use soap and a little mixture of ammonia and turpentine to remove a lot of dirt and make the glass surface more shiny (this article applies to ceramic tiles, ceramics, glass, etc.).

8. Use transparent glue with good viscosity to peel off repeatedly to remove some of the surface.

9. Use a little sodium chloride and water to wipe it off, or use paint thinner.

10. Wipe with a cotton swab dipped in nail polish remover.

11. Use special detergent or sports shoe decontamination paste to wipe.

12. If the marks that have been left for a long time have hardened, you can use a hot towel to soften them before trying again.

Question 3: How to remove the glue stuck to the plastic? Use wind oil, soak it, and wipe it off with a rag. No traces

Question 4: How to remove the offset printing on plastic bottles with Fengyoujing and safflower oil

Or go to the supermarket to buy "ChucaClin", a white sponge. It can be wiped off with water.

Question 5: How to quickly remove glue marks on plastic bottles? 20 points There is something very effective, and that is cigarette ashes. It is very effective to use it to remove trademarks, stickers and other things. You need to add some water to the stems and then rub it with your fingers to remove it easily. There is no need to worry about damaging the items

< p> Question 6: How to remove adhesive prints? Use hot water, hair dryer, essential oil, nail polish remover, etc. I have tried them all and they all work.

The principle is to use heat or oil to melt the glue.

If it is double-sided tape, soak it in vinegar and it will fall off after a pinch, or you can heat it, but it is a bit troublesome.

You can also use banana water to drip on the glue stain, and then use a brush to keep it. Brush and wait until the glue becomes soft and comes off. Rinse with clean water. Banana water can be purchased at building materials stores.

In fact, alcohol + cotton swab is the best tool to remove all adhesive marks

Question 7: How to remove the residual glue stuck to things by plastic tape In life, we often encounter products The labels, trademarks, etc. are affixed to the top. After being peeled off, there will be a layer of glue remaining on it that is difficult to remove.

In addition, we usually use tape and glue to stick things. Sometimes we need to tear it apart deliberately. Sometimes the tape will loosen and fall off due to aging over time, and there will often be residual dirt on the glue base that is difficult to remove.

The following method can quickly deal with this stubborn guy that can't be picked or washed off.

Tools/Materials

Slightly damp rag dipped in dish soap

Fengyoujing

Paper towels

Clean water

Method/steps

1

In the first step, prepare a bottle of essential oil, a piece of paper towel, and a rag dipped in dish soap. Keep a spray bottle filled with clean water next to the stain that needs to be treated.

2

In the second step, pour the essential oil on the adhesive stain to cover the entire stain surface.

3

In the third step, use a paper towel to wipe back and forth on the stain where the essential oil has been poured. You can see the stain wipes off quickly. Fold the paper towel again and change to the clean side and continue to consolidate and wipe.

If the essential oil has dried but there is still some stain that cannot be wiped off, you can pour some more essential oil on it.

4

In the fourth step, after the stain is wiped clean, use a rag dipped in detergent to wipe the original stain location several times.

Because Fengyoujing contains oil, once the stain is wiped off, no other residue will be visible on the surface. In fact, there is still oil in Fengyoujing remaining on the surface. If you don’t care about it at this time, you can If you accidentally touch it, dirt will adhere to the remaining oil again and form new stains. So don’t forget to use the degreasing power of dish soap to remove it.

5

The fifth step, after wiping it with dish soap several times, make sure it is clean, then spray some water on it to wipe away the residue of dish soap.

6

Step 6: Check the wiped area to see if there are any stains. If there are any missing areas, repeat the above steps to remove them. If there are no areas left, just call it a day. .

Question 8: How to remove self-adhesive traces on plastic products 1. Clean with absolute alcohol (absolute ethanol) and wipe it gently with a cloth dipped in alcohol.

2. Just find a soft drawing eraser. Use the eraser to gently rub the stained area back and forth, and it will be very clean.

3. Pour a little bit of essential oil onto the cloth and it can be removed. It is very effective in removing many kinds of self-adhesives. You can also try it.

4. Use a cloth dipped in "Liu Shen toilet water" for mosquito repellent. It is easy to wipe.

5 You can also try wiping it with nail polish, which is generally very effective.

Question 9: How to remove the traces of double-sided tape on plastic labels and sticky things in plastic packaging. It is actually a kind of glue, which belongs to the resin class and is similar to epoxy resin, SBS, and carbon petroleum resin. They are all raw materials for glue production. If you want to remove sticky things, you must start with chemical dissolution. Generally, resins are soluble in toluene, ethyl acetate, acetone and other organic solvents. You can use these solvents to wash off sticky things. If not It's easy to find these solvents. You can go to the paint store and buy some tinna water (paint thinner) to wash your plastic. I don't know if you are satisfied with this answer.

Question 10: How to clean the tape left on the plastic trace? !Just use an eraser for small areas.

! There are many ways to detect large areas of adhesive traces:

1. Industrial alcohol

2. Gasoline

3 , acetone

4. cyclohexanone

5. Fengyoujing

6. nail polish remover

7. hand cream /Cream, haha. . .

! Use the kind of cleaning and degreaser you buy in the store (the kind that removes asphalt) and it works great. Spray on for a while and wipe off. !WD-40

Trade name: Universal anti-rust lubricant Alias: Guilao urine

WD-40 literally means "Water Displacement, 40th attempt", WD-40 The W stands for water, the D stands for elimination, and the 40th stands for the 40th attempt.

The name WD-40 is taken directly from the research notes of the chemist who developed WD-40 in 1953. At that time, chemist Norm Larsen (1923-1970) was trying to prepare a formula that could prevent corrosion by removing water and moisture. After Norm completed his 40th attempt, with perseverance and unremitting efforts, he finally got the full taste and completed the invention.

What is included in WD-40? On the official website of WD-40 (wd40), it is stated that the ingredients contained in WD-40 are an industrial secret and only a few people in the company know it, but they can tell everyone what ingredients WD-40 does not contain. WD-40 does not contain silicone, kerosene, water, waxes, graphite, chlorofluorocarbons (CFCs), or any known carcinogens.

Functions of WD-40

1. Cleaning: WD-40 can completely remove contaminated dust, dirt and oil stains. It can also remove sticky materials and easily remove stickers, tapes, labels and super sticky materials.

2. Dehumidification: Because WD-40 can remove moisture and moisture, it can quickly dry electronic systems and prevent short circuits caused by moisture.

3. Penetration: WD-40 can remove the rust that binds metal, and unblock adhesion, frozen plugs or rusted metal parts.

4. Lubrication: The lubricating ingredients of WD-40 are evenly distributed and firmly adhere to the rotating parts.

5. Protection: WD-40 contains anti-corrosion ingredients, which can protect metal surfaces from moisture and other corrosive factors

About Rocket Chemical pany

p>

Rocket Chemical Company is located in San Diego, California. WD-40 was developed by the three founders of the company. They originally invented WD-40 to develop an anti-rust method that could be used in the aerospace field. The first application of WD-40 was on the U.S. military's first intercontinental missile Atlas. In 1958, Norm Larsen changed it into spray packaging and commercialized it. In 1969, due to the magical effect of WD-40, rockets The chemical company changed its name to WD-40 Company

Although WD-40 has many advantages, you must also pay attention to it during use:

1. WD-40 has slight effects on individual plastic parts. Corrosion

2. WD-40 is toxic and should be kept away from children

Exciting. WD-40 is flammable, please do not approach the fire source

4 .Try not to touch the skin

! Try nail polish remover too, it might work! Carburetor cleaner will keep you clean. !The simple method may be the most effective: apply household detergent, cover with plastic wrap, and then scrub after a while - I saw it on TV, you might as well try it. !Use a few medicated oils such as carminative oil or 2-day oil that are essential for home use, and drop a few points on the glue. It can be easily wiped off. This method can also wipe away the traces of chewing gum stuck to the chair.