Current location - Trademark Inquiry Complete Network - Trademark inquiry - National Three Guarantees Regulations for Pots
National Three Guarantees Regulations for Pots
Legal analysis: different brands of woks, some will have three guarantees, and some will not; If so, it may be different according to different businesses. It is best to ask the merchants. Three guarantees is the abbreviation of "guaranteed repair, replacement and return" for the goods sold by retail commercial enterprises. It refers to a kind of credit guarantee that the seller is responsible for the goods purchased by the buyer within a certain period after the goods enter the consumption field. This service is provided for failures that are not due to improper use and storage by users, but belong to product quality problems.

Legal basis: Article 9 of the Regulations on Quality Responsibility of Industrial Products must meet the following requirements before leaving the factory: (1) The products meet the quality requirements stipulated in Article 2 of these regulations and have product inspection certificates issued by inspection institutions and inspectors; (2) According to different characteristics, there are written descriptions such as product name, specification, model, composition, content, weight, use, production batch number, factory date, manufacturer, address and product technical standard number. , restricted products should be marked with the expiration date. Quality products must be marked; (3) The products subject to the production license system shall have the license number, approval date and validity period; (4) Machines, equipment, devices, meters and durable consumer goods shall not only meet the requirements in Items (1), (2) and (3) of this article, but also have detailed product instruction manuals. The contents include: technical and economic parameters, service life, scope of use, warranty period, installation method, maintenance method and preservation conditions, technical maintenance period and other effective data related to product design parameters. Electrical products should be accompanied by circuit diagrams and schematic diagrams; (5) Packaging must comply with relevant national regulations and standards. Products that are highly toxic, dangerous, fragile, pressure-resistant, moisture-proof and not inverted must have obvious indications and precautions for storage and transportation on the inner and outer packaging. The actual weight (net weight and gross weight) must be marked on the product package; (six) products using trademarks and grading marks, products or packaging should have trademarks and grading marks; (seven) meet the requirements of national security, health, environmental protection and measurement laws and regulations.