The tutorial for making stickers is as follows:

Material preparation: tape, spoon, a bowl of water, and a color printed anime character.

1. Use a spoon to press the printout on a piece of white paper and let it stick to it, as shown in the picture below.

2. Then, get the printed anime character on this white paper and cut it out, as shown in the picture below.

3. After that, pour warm water into it, and rub off the white paper behind it to form a thin layer of white paper, as shown in the picture below.

4. Finally, after the white paper at the back is evenly kneaded, take it out and stick it anywhere you like, as shown in the picture below.

Introduction to stickers:

1. Introduction:

Printing various pictures and photos on the backing adhesive paper is a common sticker on the market now. A popular fashion product loved by teenagers and young people, it can be pasted on stationery, cups and bowls, furniture, electrical appliances, metalware, porcelain, motor vehicles or non-motor vehicles, mobile phones, as well as advertising trademarks, industrial signs and other elements. series of products with a very wide range of uses.

The sticker is only the size of a 10p coin. Users only need to paste the Bluetooth-enabled sticker on some valuable items, and then use the smartphone app to locate the distance of these valuable items, allowing users to stay away from finding them. The trouble of not having something. Such a sticker is not a piece of paper in the essential sense, it is a Bluetooth signal transmitter.

2. Operation instructions.

Remove the environmental protection film on the surface of the water sticker, use scissors to cut out the required pattern, wipe the surface of the sticker clean, soak the pattern in water for about 30 to 60 seconds, and use your hands to remove the pattern. Move relative to the bottom paper. Just use the painting to separate it from the base paper. It is best to keep the water temperature between 20 and 35 degrees.

Take the picture out of the water and align it with the required placement on the substrate. Press the surface of the picture with your left hand and slowly pull out the bottom paper with your right hand. When the required position of the picture and the object to be adhered is accurate, use rubber skin or professional water sticker scraper to scrape out the water under the picture, and scrape the picture flat. After scraping off the water, use a dry towel to wipe off the sewage on the surface of the substrate, and the post is completed.