First tear off the self-adhesive decorations attached to the surface, soak the towel with warm water, and wipe it twice on the traces of the self-adhesive; then use a warm and wet towel to apply soap on the traces. Wipe it repeatedly several times; finally wipe off the soap suds with a clean warm and wet towel, and the traces of the sticker will be removed.

Introduction to trademark glue: Trademark glue is also called sign silicone. Its material itself is silicone, which is an organic synthetic rubber.

Use of trademark glue: stamp trademark text and pictures on the sheet-shaped film, and then fix the film on the product to use as a trademark.

Adhesives used for label pasting can be divided into three categories: pressure-sensitive adhesives, hydrosols and water-rewettable adhesives.

Trademark glue requirements:

Good initial adhesion, the label will not fall off, slip or warp after instant pressure.

Drying speed is fast. Suitable for high-speed automated labeling.

After curing, it has high fastness and good toughness, and the adhesive layer does not become brittle or fall off.

Non-toxic and pollution-free.

Facilitates recycling of packaging.

Features:

The trademark glue pad printing pattern is clear

The trademark glue has good oil and grease effect

The trademark glue has no shrinkage, Good oiling, clear pad printing pattern

The trademark adhesive has low viscosity and good fluidity.

The trademark adhesive has fine texture and good resilience. It can be pad printed frequently and has no impurities. No particles