Make sure that the printer is really out of powder, and then take out the printer's toner cartridge.

Take out the toner cartridge

After taking out the toner cartridge, take it out of the toner cartridge and press the green button on the left to separate it.

Shake the new compact fully.

Take the newly bought compact out of the package and shake it horizontally a few times. This step is mainly to shake the powder in the box evenly.

Install a new compact

Then remove the yellow plastic cover in front of the new compact, put the new compact into the original drum box, and gently press it until the green card on the left is stuck.

Installing photosensitive drum

Install the installed toner cartridge into the printer as a whole, and the installation method is opposite to the disassembly method.

Detection and use

After installation, close the front cover, then turn on the power button of the printer, and conduct system test. After the test is successful, the printer's ready green light will light up. This shows that the installation is complete and can be put into use normally.