1. Before starting the sand washer, turn the rotor by hand and check whether there is any abnormality in each part of the machine.

2. The user should install protective equipment on the triangle belt according to the specific situation of the site before operation.

3. Don't repair and clean the sand washer while it is running, and don't start it for maintenance.

4. Do not add stones exceeding the specified size.

The machine should rotate in a fixed direction, not in the opposite direction.

6. When the machine is running, if abnormal vibration or noise is found, the feeding should be stopped immediately, and the motor should be stopped immediately after the materials in the box are exhausted, and the machine can continue to run after stopping to check and troubleshoot. If there is pressure, the motor should be stopped first, and the materials in the cavity should be removed before starting, and then the motor should be started with no load.

7. sundries shall not be piled up in the working site of sand washer, and there must be enough lighting equipment.

Wally mechanical sand washer provided by the manufacturer, I hope to help you, thank you!