Question 1: How to add the appropriate amount of ink to the printer? Each filling is about 8-10ml. Generally, one bottle can be filled twice (referring to 831\830 and other ink cartridges. If you have a large storage capacity, you can fill it at home. A whole bottle is fine (the small bottle is not the large bottle with the continuous supply). If the continuous supply is used, just increase it to about 90.

Question 2: How to adjust the ink when using the printer to print? Start-- Control Panel---Printers and Faxes---Print Machine Pattern, right-click Printing Preferences---See what model of printer you have, mine is in---Main Window--Advanced--Continue--Put only Just tick the black ink option;

Question 3: How to correctly add ink to the printer. Adding ink cannot change the display status of the ink capacity. Only by replacing the ink cartridge and clearing it can it show that the ink is full. Even if it shows that the ink is low, you can still print normally if you add ink, but it will look uncomfortable. HP does not sell original ink. There is no such thing as original ink. It is all domestically produced compatible ink. You cannot add too much ink. Otherwise, it will flow out from the nozzle. To save ink, you can print in fast or draft mode, but the print quality will be worse.

Question 4: How to add ink to the Epson printer. If it is a printer that uses ink cartridges, you can replace it directly. Ink cartridges are enough.

If it is an ink tank printer, such as L101/201/801, the ink amount displayed on the computer is an estimate obtained by counting the printer, and may be different in actual use. The error with the actual ink amount is caused by some operations.

When the red light is always on and the actual ink amount is not less than 20 mm, click "Start" -> "Devices and Printers" in the lower left corner of the computer. " or "Printers and Faxes", right-click the printer icon used and select "Printing Preferences" -gt; "Maintenance" -gt; "EpsonStatus Monitor", click "How", follow the on-screen prompts, click "Continue", and then close window, you can continue printing at this time. When the ink in the ink tank is lower than 20 mm, refill the ink and enter the ID number.

When the ink light is not on or flashing, you can continue to use the printer. If the actual ink level is When it is lower than 20 mm, it is recommended that you replenish the ink (make sure to keep the ink bottle). When the ink light is always on, then click "Start" -> "Devices and Printers" or "Printers and Faxes" in the lower left corner of the computer. Right-click the printer icon and select "Printing Preferences" -> "Main Window" -> "EpsonStatus Monitor", click "How" and follow the on-screen prompts to enter the ID number on the ink bottle.

If it is L211/L351/L353/L358 and other ink tank printers, when the ink light is always on, please fill it with ink (it is recommended to fill all 4 color ink tanks), and then press the maintenance button of the printer (inverted triangle key), the ink will be reset and the ink light will go out.

Tips:

1. Please pay attention to the ink capacity of the ink tank. When the ink capacity is less than 20 mm, please replenish the ink in time to avoid causing print head failure.

2. The ink light is always on. If there is no response when pressing the maintenance button, please press and hold the printer's maintenance button (inverted triangle button) and rub it left and right twice.

Question 5: How to add continuous supply ink to the printer? Your machine is equipped with continuous supply. The black button on the cyan chip is called the reset chip.

The printer is turned on. In the status, press and hold the black button for 10-15 seconds, release it, and press the reset button.

If the valve does not work, try a few more times.

It will definitely be ok!

The so-called power off and on again is useless.

Your problem is that the printer cartridge needs to be cleared!

Question 6: How to enter the code after adding ink to the Epson printer? Please first determine the model of your printer, whether it is (L101, L201, L301) printer

1. You can enter the code on the computer Click "Start"-gt; "Devices and Printers" or "Printers and Faxes" in the lower left corner, right-click the printer icon used and select "Printing Preferences"-gt; "Maintenance"-gt; "Epson Status Monitor", When the ink level is low or the ink is exhausted, there will be a "How" button in this window. Click here to open the window for entering the ID number. Please follow the on-screen prompts.

Note: If the ink indicator light is flashing, you can continue to use it until the ink indicator light stays on and then enter the ID number to reset.

2. The ink volume obtained by counting non-(L201.L101, L801) printers is an estimate. In actual use, there may be errors with the actual ink volume due to some operations.

When the ink light is always on, please fill up the ink (it is recommended to fill all 4 color ink tanks), and then press the maintenance button (inverted triangle button) of the printer to reset the ink. The lights go out.

Tips:

Please pay attention to the ink capacity of the ink tank. When the ink capacity is less than 20 mm, please replenish the ink in time to avoid causing print head failure.

. The ink light is always on. If there is no response when pressing the maintenance button, please press and hold the printer's maintenance button (inverted triangle button) and rub it left and right twice.

If the above solutions still cannot solve your problem, please log in to the "Online Engineer" on Epson's official website: 219.232.55.146/portal/epson and communicate with Epson engineers online in real time so that the problem can be solved in time. (Epson "Online Engineer" service hours: Monday to Friday 9:00-18:00)

Question 7: How to add ink to Dell printer? Open the upper cover, and the car will move the ink cartridge to the middle. You can take out the ink cartridge with your hands. Remove the label on the ink cartridge, and then you will see a small hole. Use the ink refill tool to add it.

Question 8: How to add ink to an inkjet printer? There are many capillary grooves under the trademark to maintain a certain negative pressure. If you tear it off, it will leak. The correct method is to drill a hole on the side or top with the drill bit that comes with it and add it. Stain it again

Question 9: How to add ink to Epson printer? Most Epson printers are suitable for continuous supply. It is too troublesome to refill ink. In addition, the capacity of Epson ink cartridges is not very large, so refilling ink will be very frequent. If it is used a lot, it is recommended to directly change the continuous supply. If it is not used much, you can choose to add ink. The method of adding ink is to punch a hole on the surface of the ink cartridge and use a syringe to inject the ink into the sponge inside the cartridge, 5-8ML each time. Then seal the hole with stickers.

Question 10: How to add ink to the printer’s continuous supply system? What is the structure of the external ink bottle you bought?

The two holes are the air guide hole and the ink filling hole, and they are connected.

The air guide hole is used when the printer is working. It is open, but the ink filling hole must be sealed.

When adding ink, seal the air guide hole before adding ink.